(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Insert（Type：Self-Tapping）
In general, coil inserts that have been machined into a coil shape are very common, but we also have a wide lineup that includes "self-tapping inserts", "inserts for resin", "insert nuts", "locking inserts", etc., enabling use to suit various environments or materials.
MISUMI enables spec searches and ordering quantities from just 1 piece. Tools are also sold in addition to the inserts themselves.
[Materials]
Iron, stainless steel, brass, phosphor bronze, Inconel, nitronics
[Size]
M1.4 to M39 are available as well as imperial sizes
[Search Keywords]
Heli-Sert, E-Sert, Sprue, Female Thread
Search by specifying the lower class category
| Days to Ship |
|
|---|
-
Self-Tapping Inserts - Slotted
MISUMI
This is a tapping insert with split groove and has threads on both inner and outer diameters.
Fastening parts that do not require a front power strip to compensate for the mechanical strength of thread sections made of materials with relatively low strength.- Volume Discount
Standard Price: SGD 1.65- Days to Ship: Same day or more -
![[Clean & Pack]Self-Tapping Inserts - Slotted](//content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/110310783359/110310783359_001_20230911105917.jpg?$product_view_b$)
[Clean & Pack]Self-Tapping Inserts - Slotted
MISUMI
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products·Degreasing (Anti-rust single packing) : Part Number SL-□□ ·Precision cleaning (Degassing double packing) : Part Number SH-□□ ·Electrolytic polishing + precision cleaning (Degassing double packing) : Part Number SHD-□□ Product Part Number Cleaning Method Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Process SL-□□ Degreasing Anti-rust packing Oil removal General environment Regular assembly process Post battery assembly process SH-□□ Precision cleaning Degassing double packing Oil removal
Dust removalClean environment (Class 10 to 1,000) Battery assembly process LCD-related post assembly process In-vehicle camera assembly process SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal
Dust removal
Outgas reductionVacuum environment
Clean environment (Class 10 to 1,000)Pre-semiconductor process Liquid crystal deposition process Pre-OLED process ■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.
Slotted tapping inserts with both external and internal threads.
This fastener components reinforce relatively-low mechanical thread strength and allow skipping of the pre-tapping.- Volume Discount
Standard Price: SGD 5.80- Days to Ship: 6 Day(s) or more -
Ensat 3 Holes Short Type, Model 307
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Standard Price: SGD 1.45- Days to Ship: 4 Day(s) or more -
Stainless Steel Insert Nut, Screw-in (Slotted)/IRU-S
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2.6/3/4/5/6/8
[Material] Free-Cutting Stainless Steel (SUS303)
[Processing] DegreasingStandard Price: SGD 1.12- Days to Ship: 11 Day(s) or more -
Ensat, Type 308, 3-Hole / Long Size
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Standard Price: SGD 1.43- Days to Ship: 4 Day(s) or more -
- On Sale Till 31/03/2025
Ensat Expanded Slot Type, Model 302
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Standard Price: SGD 0.77- Special Price Days to Ship: Same day or more -
Stainless Steel/Insert Nut Threaded Type / IRU
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2/2.5/2.6/3/4/5/6/8
[Material] Free-Cutting Stainless Steel (SUS303)
[Processing] DegreasingStandard Price: SGD 0.84- Days to Ship: 11 Day(s) or more -
Ensat Extra Coarse External Thread Type, Model 309
KKV
Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Reinforcing female screws using Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily causes female screws to be destroyed when directly tapped.
Standard Price: SGD 0.80- Days to Ship: 4 Day(s) or more -
Ensat Chip Free Short Type, Model 337
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Standard Price: SGD 1.49- Days to Ship: 4 Day(s) or more -
Ensat Chip Free Long Type, Model 338
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Standard Price: SGD 1.49- Days to Ship: 4 Day(s) or more -
Brass Insert Nut (Screw-In Type / Slotted) IRB-S/IRB-SC
HIROSUGI-KEIKI
[Nominal designation of thread (M)] 2.6/3/4/5/6/8
[Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm
[Treatment] Nickel plating (Ni)/degreasingStandard Price: SGD 0.67- Days to Ship: 11 Day(s) or more -
- On Sale Till 31/03/2025
Steel Ensat Small Outer Diameter Expanded Slot Type, Model 303
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Standard Price: SGD 0.96- Special Price Days to Ship: Same day or more -
Steel Ensat Small Outer Diameter, 3 Hole Long Type, Model 348
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Standard Price: SGD 1.69- Days to Ship: 4 Day(s) or more -
Brass Insert Nut (Screw-In Type) IRB/IRB-C
HIROSUGI-KEIKI
[Nominal designation of thread (M)] 2/2.5/2.6/3/4/5/6/8
[Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm
[Treatment] Nickel plating (Ni)/degreasingStandard Price: SGD 0.54- Days to Ship: 11 Day(s) or more -
Ensat Expanded Slot Type, Model 302, Inch Type
KKV
[Features]
· Can be used for free-cutting type aluminum alloy, high-plasticity resin, etc.
· The expanded slots act as cutting edges and are long in length, providing good engagement with the corresponding material.
· If you set a small pilot hole diameter and insert into a hard material, the slots on the tip will contract (taper), potentially leading to defective machining.
[Materials]
SUM22L free-cutting steel (equivalent), hexavalent chromateStandard Price: SGD 1.76- Days to Ship: 4 Day(s) or more -
Brass Ensat Thread Plastic Deformation Type, Model 305
KKV
Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Reinforcing female screws using Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily causes female screws to be destroyed when directly tapped.
Standard Price: SGD 0.72- Days to Ship: 4 Day(s) or more -
Steel Ensat With Pin Short Type, Model 317
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Standard Price: SGD 8.05- Days to Ship: 4 Day(s) or more -
Steel Ensat With Pin Long Type, Model 318
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Standard Price: SGD 8.06- Days to Ship: 4 Day(s) or more -
Steel Ensat Small Outer Diameter, 3 Hole Short Type, Model 347
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Standard Price: SGD 1.69- Days to Ship: 4 Day(s) or more -
JAPAN DRIVEIT
[Type] Self-tapping Used
[Application] Resin: General
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard, Screw Diameter (following insertion) M (mm), 3, 4, 5, 6, 8, 10, Length (following insertion)
[L](D = screw diameter M) 2D 2.5D
[Length] B (mm) 6.0 8.0 10.0 14.0 15.0 18.0Standard Price: SGD 1.28- Days to Ship: 4 Day(s) or more -
Brass Insert Nut (Screw-In Type) IRB-W/-CW
HIROSUGI-KEIKI
[Nominal designation of thread (M)] 2.6/3/4/5/6/8
[Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm
[Treatment] Nickel plating (Ni)/degreasingStandard Price: SGD 1.03- Days to Ship: 11 Day(s) or more -
Stainless Steel/Aluminum Insert Nut Threaded Type (Loosening Prevention) / IRU-W
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2.6/3/4/5/6/8
[Material] Free-Cutting Stainless Steel (SUS303)
[Processing] DegreasingStandard Price: SGD 1.12- Days to Ship: 11 Day(s) or more -
Aluminum Insert Nut (Screw-In Type) IRL-B/IRL-K
HIROSUGI-KEIKI
[Nominal designation of thread (M)] 2/2.5/2.6/3/4/5/6/8
[Material] Lead-free free-cutting aluminum (KS26), lead content 300 ppm or less
[Treatment] Black anodized (BAL)/Kanigen platingStandard Price: SGD 0.65- Days to Ship: 11 Day(s) or more -
Aluminum Insert Nut (Screw-In Type / Coated With Loosening Prevention Agent) IRL-BW/-KW
HIROSUGI-KEIKI
[Nominal designation of thread (M)] 2.6/3/4/5/6/8
[Material] Lead-free free-cutting aluminum (KS26), lead content 300 ppm or less
[Treatment] Black anodized (BAL)/Kanigen platingStandard Price: SGD 1.15- Days to Ship: 11 Day(s) or more -
Brass Insert Nut (Screw-In Type / Slotted) IRB-SW/-SCW
HIROSUGI-KEIKI
[Nominal designation of thread (M)] 2.6/3/4/5/6/8
[Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm
[Treatment] Nickel plating (Ni)/degreasingStandard Price: SGD 1.02- Days to Ship: 11 Day(s) or more -
Stainless Steel Insert Nut, Screw-in (Thread Locker / Slotted) / IRU-SW
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2.6/3/4/5/6/8
[Material] Free-Cutting Stainless Steel (SUS303)
[Processing] DegreasingStandard Price: SGD 1.43- Days to Ship: 11 Day(s) or more
![[Clean & Pack]Self-Tapping Inserts - Slotted](http://content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/110310783359/110310783359_001_20230911105917.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Screw Dia. M (after insertion)(mm) |
| Environmentally friendly |
| Type |
| Characteristics/Applications |
| Material |
| Screw Type |
| Length L (after insertion) (D = Thread Dia. M) |
| Application |
| Notch |
| Thread Dia. (After inserted), Unified(inch) |
| Shape |
| Sales Unit |
| Cleaning Method |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | KKV | HIROSUGI-KEIKI | KKV | KKV | HIROSUGI-KEIKI | KKV | KKV | KKV | HIROSUGI-KEIKI | KKV | KKV | HIROSUGI-KEIKI | KKV | KKV | KKV | KKV | KKV | JAPAN DRIVEIT | HIROSUGI-KEIKI | HIROSUGI-KEIKI | HIROSUGI-KEIKI | HIROSUGI-KEIKI | HIROSUGI-KEIKI | HIROSUGI-KEIKI |
| Product Series | Steel Ensat Small Outer Diameter Expanded Slot Type, Model 303 | Steel Ensat Small Outer Diameter, 3 Hole Long Type, Model 348 | Steel Ensat Small Outer Diameter, 3 Hole Short Type, Model 347 | Stainless Steel/Aluminum Insert Nut Threaded Type (Loosening Prevention) / IRU-W | Aluminum Insert Nut (Screw-In Type / Coated With Loosening Prevention Agent) IRL-BW/-KW | Stainless Steel Insert Nut, Screw-in (Thread Locker / Slotted) / IRU-SW | ||||||||||||||||||||
| CAD |
|
| ||||||||||||||||||||||||
| Days to Ship | Same day or more | 6 Day(s) or more | 4 Day(s) or more | 11 Day(s) or more | 4 Day(s) or more | Same day or more | 11 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 11 Day(s) or more | Same day or more | 4 Day(s) or more | 11 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more |
| Screw Dia. M (after insertion)(mm) | 3 ～ 12 | 3 ～ 12 | 3 ～ 16 | 2.6 ～ 8 | 3 ～ 16 | 2.5 ～ 30 | 2 ～ 8 | 3 ～ 16 | 3 ～ 12 | 3 ～ 16 | 2.6 ～ 8 | 3 ～ 10 | 4 ～ 12 | 2 ～ 8 | - | 3 ～ 6 | 4 ～ 14 | 4 ～ 16 | 4 ～ 16 | 3 ～ 8 | 2.6 ～ 8 | 2.6 ～ 8 | 2 ～ 8 | 2.6 ～ 8 | 2.6 ～ 8 | 2.6 ～ 8 |
| Environmentally friendly | - | RoHS Compliant (10 Substances) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Type | Self-Tapping | Self-Tapping | Self-Tapping | Self-Tapping | Self-Tapping | Self-Tapping | Self-Tapping | Self-Tapping | Self-Tapping | Self-Tapping | Self-Tapping | Self-Tapping | Self-Tapping | Self-Tapping | Self-Tapping | Self-Tapping | Self-Tapping | Self-Tapping | Self-Tapping | Self-Tapping | Self-Tapping | Self-Tapping | Self-Tapping | Self-Tapping | Self-Tapping | Self-Tapping |
| Characteristics/Applications | - | Clean Washed | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Material | Steel / Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Steel / Stainless Steel (SUS303/304) / Stainless Steel (SUS430F) | Stainless Steel (SUS303/304) | Steel / Stainless Steel (SUS303/304) / Stainless Steel (SUS430F) | Steel / Stainless Steel (SUS303/304) / Stainless Steel (SUS430F) / Brass | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) / Brass | Steel / Stainless Steel (SUS303/304) / Stainless Steel (SUS430F) | Steel / Stainless Steel (SUS303/304) / Stainless Steel (SUS430F) | Brass | Steel | Steel | Brass | Steel | Brass | Steel | Steel | Steel | Brass | Brass | Stainless Steel (SUS303/304) | Aluminum | Aluminum | Brass | Stainless Steel (SUS303/304) |
| Screw Type | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Unified (Coarse) Thread / Unified (Fine) Thread / BSW (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread |
| Length L (after insertion) (D = Thread Dia. M) | - | - | - | 1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D | - | - | 1D / 1.5D / 2D / 2.5D / 3D / 0.7D / 0.8D / 3.5D | - | - | - | 1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D | - | - | 1D / 1.5D / 2D / 2.5D / 3D / 0.7D / 0.8D / 3.5D | - | - | - | - | - | 2D / 2.5D | 1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D | 1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D | 1D / 1.5D / 2D / 2.5D / 3D / 0.7D / 0.8D / 3.5D | 1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D | 1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D | 1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D |
| Application | Light Metal | Light Metal | - | Cast Iron | - | - | Cast Iron | - | - | - | Light Metal | - | - | Light Metal | - | - | - | - | - | Resin General | Light Metal | Cast Iron | Light Metal | Light Metal | Light Metal | Cast Iron |
| Notch | Not Provided | Not Provided | - | Not Provided | - | - | Not Provided | - | - | - | Not Provided | - | - | Not Provided | Not Provided | - | - | - | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
| Thread Dia. (After inserted), Unified(inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1/2" ～ No. 10 | - | - | - | - | - | - | - | - | - | - | - |
| Shape | Slotted | Slotted | 3-Hole Type | Slotted | 3-Hole Type | Slotted | Standard | Standard | Tip Free Type | Tip Free Type | Slotted | Small O.D. Slotted Type | Small O.D. 3-Hole Type | Standard | Slotted | Standard | With Pin Type | With Pin Type | Small O.D. 3-Hole Type | Standard | Standard | Standard | Standard | Standard | Slotted | Slotted |
| Sales Unit | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | - | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | - | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | - | - | - | Low Quantity (Available beginning with 1 pc.) | Box, Pkg. | Box, Pkg. | Box, Pkg. | Box, Pkg. | Box, Pkg. | Box, Pkg. |
| Cleaning Method | - | Degreasing / Precision Cleaning / Electrolytic Polishing + Precision Cleaning | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
![[Clean & Pack]Self-Tapping Inserts - Slotted](http://content.misumi-ec.com/image/upload/t_product_view_c/v1/p/jp/product/series/110310783359/110310783359_001_20230911105917.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Screw Dia. M (after insertion)(mm)
-
Environmentally friendly
-
Type
-
Characteristics/Applications
-
Material
- Steel
- Stainless Steel (SUS303/304)
- Stainless Steel (SUS316)
- Stainless Steel (SUS430F)
- Brass
- Phosphor Bronze
- Inconel X-750
- Nitrox 60
- Aluminum
- Nylon
-
Screw Type
- Metric (Coarse) Thread
- Metric (Fine) Thread
- Unified (Coarse) Thread
- Unified (Fine) Thread
- BSW (Coarse) Thread
-
Length L (after insertion) (D = Thread Dia. M)
-
Application
- Light Metal
- Cast Iron
- Resin General
-
Notch
-
Thread Dia. (After inserted), Unified(inch)
-
Shape
-
Sales Unit
- Low Quantity (Available beginning with 1 pc.)
- Box, Pkg.
-
Cleaning Method
- Degreasing
- Precision Cleaning
- Electrolytic Polishing + Precision Cleaning
Narrow search by specifying Manufacturer
-
- KKV (13)
- HIROSUGI-KEIKI (10)
- JAPAN DRIVEIT (1)
- NIPPON SPREW (0)
- HIROSUGI SEIKI (0)
- TSUGAMI (0)
- KS SANGYO (0)
- ACCURATE (0)
- SEL JAPAN (0)
- SUNCO (0)
- ESCO (0)
- TOKAI METAL INDUSTRY (0)
- BOHSEI (0)
- RECOIL (0)
CAD
-
- 2D
- 3D
Related Categories to Insert
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?