(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
- Please be informed of our operating hours during the Chinese New Year Holidays. Click here for details.
Threaded Inserts（Application：Light Metal）
These generally have embedded male threads. Coil shapes are inserted with a dedicated tool, press-fit into a collar, or mounted while self-tapping threads.
Choose a shape to suit the application. Some items require dedicated tools.
| Days to Ship |
|
|---|
-
- On Sale Till 31/03/2025
MISUMI
[Specification expansion] In response to many requests, a new standard product is now available! *Please see the specification table or model number list for applicable products.
[Handling Standards] Coarse M diameter: 2, 2.2, 2.5, 2.6, 3, 3.5, 4, 5, 6, 8, 10, 12, 14, 16, 18, Fine M diameter: 6, 8, 10, 12, 14, 16, 18
You can purchase from 1 piece!
Application: Strengthens the female thread of the base.
Features: Durable screw connection. You can create a concise design.
Material: SUS304.- Volume Discount
Standard Price: SGD 1.39- Special Price Days to Ship: Same day or more -
Self-Tapping Inserts - Slotted
MISUMI
This is a tapping insert with split groove and has threads on both inner and outer diameters.
Fastening parts that do not require a front power strip to compensate for the mechanical strength of thread sections made of materials with relatively low strength.- Volume Discount
Standard Price: SGD 1.65- Days to Ship: Same day or more -
Recoil-Free (mm) SUS304【1-3 Pieces Per Package】
RECOIL
Made from regular 304 grade stainless steel (18–8), but inserts made from other application-specific materials are also manufactured.
Standard Price: SGD 1.24- Days to Ship: 4 Day(s) or more -
Brass Bit Insert (Flange Type) / HFB
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2/2.6/3/4/5
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] DegreasingStandard Price: SGD 0.37- Days to Ship: 4 Day(s) or more -
RECOIL
An insert for corrosion resistance and non-magnetic applications (Helisert and sprue).
- Volume Discount
Standard Price: SGD 0.89- Days to Ship: 4 Day(s) or more -
RECOIL
Insert to prevent screw galling (seizing). No lubricating oil required. (Helisert and sprue).
Days to Ship: 4 Day(s) or more -
RECOIL
Recoil lock type insert designed to stop bolts from loosening during severe vibration or temperature changes.
Days to Ship: 4 Day(s) or more -
- On Sale Till 31/03/2025
Thread Insert (Box)【100 Pieces Per Package】
MISUMI
For in-house inventory or for a large number of uses, purchasing by the carton is advantageous.
Standard Price: SGD 62.33- Special Price Days to Ship: Same day or more -
Brass Insert Nut (Screw-In Type / Slotted) IRB-S/IRB-SC
HIROSUGI-KEIKI
[Nominal designation of thread (M)] 2.6/3/4/5/6/8
[Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm
[Treatment] Nickel plating (Ni)/degreasingStandard Price: SGD 0.67- Days to Ship: 11 Day(s) or more -
Brass Bit Insert (Standard Model / Single-Sided Type) HSB
HIROSUGI-KEIKI
[Nominal of Thread (M)] 1.4/1.6/1.7/2/2.6/3/4/5
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] DegreasingStandard Price: SGD 0.33- Days to Ship: 4 Day(s) or more -
![[Clean & Pack]Self-Tapping Inserts - Slotted](//content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/110310783359/110310783359_001_20230911105917.jpg?$product_view_b$)
[Clean & Pack]Self-Tapping Inserts - Slotted
MISUMI
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products·Degreasing (Anti-rust single packing) : Part Number SL-□□ ·Precision cleaning (Degassing double packing) : Part Number SH-□□ ·Electrolytic polishing + precision cleaning (Degassing double packing) : Part Number SHD-□□ Product Part Number Cleaning Method Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Process SL-□□ Degreasing Anti-rust packing Oil removal General environment Regular assembly process Post battery assembly process SH-□□ Precision cleaning Degassing double packing Oil removal
Dust removalClean environment (Class 10 to 1,000) Battery assembly process LCD-related post assembly process In-vehicle camera assembly process SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal
Dust removal
Outgas reductionVacuum environment
Clean environment (Class 10 to 1,000)Pre-semiconductor process Liquid crystal deposition process Pre-OLED process ■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.
Slotted tapping inserts with both external and internal threads.
This fastener components reinforce relatively-low mechanical thread strength and allow skipping of the pre-tapping.- Volume Discount
Standard Price: SGD 5.80- Days to Ship: 6 Day(s) or more -
E-Certs【1-100 Pieces Per Package】
TSUGAMI
Old 'Heli-Coils Inserted'. The screws of the main body are reinforced, ensuring a highly durable fastening.
Days to Ship: Same day or more -
Brass Bit Insert (Standard, Double-sided) HSB-Z
HIROSUGI-KEIKI
[Nominal of Thread (M)] 1.4/1.6/1.7/2/2.6/3/4/5
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] DegreasingStandard Price: SGD 0.35- Days to Ship: 11 Day(s) or more -
Brass Mini Bit Inserts / HMIB-Z
HIROSUGI-KEIKI
[Nominal of Thread (M)] 1.4/1.6/1.7
[Usage Method] Press-fitting / Heated Press-fitting
[Compatible Resin] Thermoplastic
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] DegreasingStandard Price: SGD 0.35- Days to Ship: 4 Day(s) or more -
ACCURATE
· Can easily be taken out with the included tang. Fine adjustment of depth is possible even after insertion.
· Newly-developed insertion tool reduces mistakes and increases speed of work.Standard Price: SGD 1.06- Days to Ship: 8 Day(s) or more -
Sprue【1-100 Pieces Per Package】
NIPPON SPREW
Screw reinforcement made from a coiled, rhombic section stainless steel wire. Highly reliable fastening is achieved through ingenious use of spring action.
- Volume Discount
Standard Price: SGD 0.50- Days to Ship: 4 Day(s) or more -
Recoil Packet (Milli)【5-10 Pieces Per Package】
RECOIL
[Type] Threaded Insert Use
[Application] Light Metal
[Materials] SUS304 with Notch
[Application] Light Metal
[Screw type] Coarse/Fine Screw Diameter (after insertion) 2 2.2 2.5 3 3.5 4 5 6 7 8 9 10 11 12 14 16 18 20 Length (after insertion)
[L](D = screw diameter M) 1D 1.5D 2D
[Sales unit] Minimum Quantity (Available for Purchase from 1 pc) Box and Pkg.
[Pitch (mm)] 0.4 0.45 0.5 0.6 0.7 0.8 1.0 1.25 1.5 1.75 2.0 2.5 Usage Environment: Internal Combustion Engines/Manufacturing Equipment Quantity 5 10Standard Price: SGD 6.42- Days to Ship: 4 Day(s) or more -
RECOIL
Electrical junction joint up to 300 °C. Insert for non-magnetic application (Helisert and sprue).
Days to Ship: 4 Day(s) or more -
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2.6/3/4/5/6/8
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] DegreasingStandard Price: SGD 0.37- Days to Ship: 11 Day(s) or more -
Self Floating Fastener【1-1,000 Pieces Per Package】
SEL JAPAN
Able to obtain high retention force. Reduces work hours and costs drastically, and eliminates pitching shift during assembly.
Standard Price: SGD 2.16- Days to Ship: 4 Day(s) or more -
Sel Locking Fastener SL (Lock)【1,000 Pieces Per Package】
SEL JAPAN
The optimal nut for preventing vibrating parts working loose, etc. To fix in place, simply press in and tighten with a normal screwdriver. No special tools required.
Standard Price: SGD 2,241.62 Days to Ship: 7 Day(s) or more -
Sprue (Unified) (UNC)【1-100 Pieces Per Package】
NIPPON SPREW
Screw reinforcer featuring coiling of a diamond shaped stainless steel thread. Can achieve high-reliability tightening by using the springback skillfully.
Standard Price: SGD 1.32- Days to Ship: 4 Day(s) or more -
TSUGAMI
Old 'Heli-Coils Inserted'. The screws of the main body are reinforced, which ensures highly durable fastening.
Standard Price: SGD 1.38- Days to Ship: 4 Day(s) or more -
TSUGAMI
Old 'Heli-Coils Inserted'. The screws of the main body are reinforced, ensuring a highly durable fastening.
Standard Price: SGD 1.56 Days to Ship: 4 Day(s) or more -
TSUGAMI
Old 'Heli-Coils Inserted'. The screws of the main body are reinforced, ensuring a highly durable fastening.
Standard Price: SGD 1.56 Days to Ship: 4 Day(s) or more -
Recoil Packet (UNC)【5-10 Pieces Per Package】
RECOIL
*Unfortunately, only lengths of 1.5D are available.
Days to Ship: 4 Day(s) or more -
RECOIL
Recoil, threaded insert, recoil-free special size. [Thread Type]Coarse. "Material" SUS304
Standard Price: SGD 1.65- Days to Ship: 4 Day(s) or more -
Recoil-Free (Specified mm) SUS304
RECOIL
The material is normal stainless steel 304 (18–8), but the material has been manufactured with other materials added for special applications.
Days to Ship: 4 Day(s) or more -
RECOIL
The material is normal stainless steel 304 (18–8), but the material has been manufactured with other materials added for special applications.
Days to Ship: 4 Day(s) or more -
RECOIL
The color of the main body will become silver when the method of heat treatment changes.
Not plated. (Inconel Black Recoil)
An insert (Helisert/Sprue) for use at high temperatures (425–550°C) and with non-magnetic applications.
[Features]
· Nickel alloy.
· For use at high temperatures (425–550°C [800–1,000°F]) and with non-magnetic applications.Standard Price: SGD 19.95- Days to Ship: 4 Day(s) or more -
Male Screw Repair Coil Thread -R【20 Pieces Per Package】
KS SANGYO
Insert screw that can be inserted and removed easily and smoothly.
[Features]
· Ready-to-use screw insert, compatible with the tools you have at hand.
· The sampling notch makes it unnecessary to forcibly pull out to avoid damaging the base material.
[Applications]
· For reinforcement of materials such as aluminum and plastic where female threads have low strength.
· Weight reduction is possible since it can be inserted into the base material of materials prone to female screw breakage.
· For countermeasures against vibration and reinforcement of spots where strong vibration is present, such as with industrial machinery and the engines of vehicles or motorcycles.
· Repairs and reforms broken, worn out, and crushed female threads.Standard Price: SGD 19.74 Days to Ship: 4 Day(s) or more -
Brass Ultrasert IV (Flanged) / HFU
HIROSUGI-KEIKI
[Nominal of Thread (M)] 3/4/5/6/8
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] DegreasingStandard Price: SGD 0.52- Days to Ship: 11 Day(s) or more -
Sel Locking Fastener SLN (Non-Lock)【1-1,000 Pieces Per Package】
SEL JAPAN
Optimal nut for preventing looseness of vibrating parts, etc. For mounting, press in and tighten with a normal screwdriver. No special tools required.
Standard Price: SGD 2.19- Days to Ship: 4 Day(s) or more -
Sprue (Fine, P=1.25)【1-100 Pieces Per Package】
NIPPON SPREW
Screw reinforcement made from a coiled, rhombic section stainless steel wire. Highly reliable fastening is achieved through ingenious use of spring action.
Standard Price: SGD 0.99- Days to Ship: 4 Day(s) or more -
Sprue (Unify) (UNF)【1-100 Pieces Per Package】
NIPPON SPREW
Screw reinforcer featuring a coiled, diamond-shaped stainless steel thread. Can achieve high-reliability tightening by effective use of the the springback.
Standard Price: SGD 1.56- Days to Ship: 4 Day(s) or more -
Lock Sprue【1-100 Pieces Per Package】
NIPPON SPREW
This SPREW has enhanced locking characteristics. The central portion of the SPREW coil is formed from several windings of angular grips. The spring action of the grips keeps male screws firmly tightened, and prevents looseness caused by strong impacts or shocks.
Days to Ship: 4 Day(s) or more -
Recoil Packet (UNF)【10 Pieces Per Package】
RECOIL
*Unfortunately, only lengths of 1.5D are available.
[Features]
• Recoil created by winding high quality stainless steel wire with a rhomboid cross section into a spring shape
• Insert is made one turn larger than the base material hole, and has a mild taper
• Once installed, the spring action makes it an almost permanent fixture that cannot be extracted.Days to Ship: 4 Day(s) or more -
RECOIL
The material is normal stainless steel 304 (18–8), but the material has been manufactured with other materials added for special applications.
Days to Ship: 4 Day(s) or more -
Brass Insert Nut (Screw-In Type / Slotted) IRB-SW/-SCW
HIROSUGI-KEIKI
[Nominal designation of thread (M)] 2.6/3/4/5/6/8
[Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm
[Treatment] Nickel plating (Ni)/degreasingStandard Price: SGD 1.02- Days to Ship: 11 Day(s) or more -
Brass Dutch Insert (Standard) / HSD
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2.6/3/4/5
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] DegreasingStandard Price: SGD 0.63- Days to Ship: 11 Day(s) or more -
Brass Dutch Insert (Flanged) / HFD
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2.6/3/4/5
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] DegreasingStandard Price: SGD 0.78- Days to Ship: 11 Day(s) or more -
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2/2.6/3/4/5/6/8/10
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] DegreasingStandard Price: SGD 0.39- Days to Ship: 11 Day(s) or more
![[Clean & Pack]Self-Tapping Inserts - Slotted](http://content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/110310783359/110310783359_001_20230911105917.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Screw Dia. M (after insertion)(mm) |
| Environmentally friendly |
| Type |
| Characteristics/Applications |
| Material |
| Screw Type |
| Length L (after insertion) (D = Thread Dia. M) |
| Application |
| Notch |
| Thread Dia. (After inserted), Unified(inch) |
| Shape |
| Sales Unit |
| Cleaning Method |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | RECOIL | HIROSUGI-KEIKI | RECOIL | RECOIL | RECOIL | MISUMI | HIROSUGI-KEIKI | HIROSUGI-KEIKI | MISUMI | TSUGAMI | HIROSUGI-KEIKI | HIROSUGI-KEIKI | ACCURATE | NIPPON SPREW | RECOIL | RECOIL | HIROSUGI-KEIKI | SEL JAPAN | SEL JAPAN | NIPPON SPREW | TSUGAMI | TSUGAMI | TSUGAMI | RECOIL | RECOIL | RECOIL | RECOIL | RECOIL | KS SANGYO | HIROSUGI-KEIKI | SEL JAPAN | NIPPON SPREW | NIPPON SPREW | NIPPON SPREW | RECOIL | RECOIL | HIROSUGI-KEIKI | HIROSUGI-KEIKI | HIROSUGI-KEIKI | HIROSUGI-KEIKI |
| Product Series | Sel Locking Fastener SLN (Non-Lock)【1-1,000 Pieces Per Package】 | |||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
| ||||||||||||||||||||||||||||||||||||||
| Days to Ship | Same day or more | Same day or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | Same day or more | 11 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | Same day or more | 11 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 11 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 11 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more |
| Screw Dia. M (after insertion)(mm) | 3 ～ 16 | 3 ～ 12 | 2 ～ 42 | 2 ～ 5 | 3 ～ 16 | 3 ～ 12 | 3 ～ 24 | 3 ～ 8 | 2.6 ～ 8 | 1.4 ～ 5 | 3 ～ 12 | 2 ～ 24 | 1.4 ～ 5 | 1.4 ～ 1.7 | 3 ～ 6 | 2 ～ 30 | 2 ～ 20 | 3 ～ 24 | 2.6 ～ 8 | 3 ～ 4 | 4 | - | 10 ～ 16 | - | - | - | 3 ～ 8 | 8 ～ 24 | - | 3 ～ 12 | 3 ～ 6 | 3 ～ 8 | 3 ～ 4 | 10 ～ 20 | - | 4 ～ 10 | - | - | 2.6 ～ 8 | 2.6 ～ 5 | 2.6 ～ 5 | 2 ～ 10 |
| Environmentally friendly | - | - | - | - | - | - | - | - | - | - | RoHS Compliant (10 Substances) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Type | Standard | Self-Tapping | Standard | Press Fit | Standard | Standard | Standard | Standard | Self-Tapping | Press Fit | Self-Tapping | Standard | Press Fit | Press Fit | Standard | Standard | Standard | Standard | Press Fit | Swaged | Swaged | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Press Fit | Swaged | Standard | Standard | Standard | Standard | Standard | Self-Tapping | Press Fit | Press Fit | Press Fit |
| Characteristics/Applications | - | - | - | - | - | - | - | - | - | - | Clean Washed | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Material | Stainless Steel (SUS303/304) | Steel / Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Brass | Stainless Steel (SUS316) | Nitrox 60 | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Brass | Brass | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Brass | Brass | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) / Phosphor Bronze | Stainless Steel (SUS303/304) | Phosphor Bronze | Brass | Steel / Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Inconel X-750 | Stainless Steel (SUS303/304) | Brass | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Brass | Brass | Brass | Brass |
| Screw Type | Metric (Coarse) Thread / Metric (Fine) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread / Metric (Fine) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Unified (Coarse) Thread | Metric (Fine) Thread | Unified (Coarse) Thread | Unified (Fine) Thread | Unified (Coarse) Thread | Metric (Coarse) Thread | Metric (Fine) Thread | Unified (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Fine) Thread | Unified (Fine) Thread | Metric (Coarse) Thread | Unified (Fine) Thread | Unified (Fine) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread |
| Length L (after insertion) (D = Thread Dia. M) | 1D / 1.5D / 2D / 3D | - | 1D / 1.5D / 2D / 2.5D / 3D | 1D / 1.5D / 2D / 2.5D / 3D | 1D / 1.5D / 2D | 1D / 1.5D / 2D | 1D / 1.5D / 2D | 1D / 1.5D / 2D | 1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D | 1D / 1.5D / 2D / 2.5D / 3D / 0.7D / 0.8D / 3.5D / 4D | - | 1D / 1.5D / 2D / 2.5D / 3D / 0.5D | 1D / 1.5D / 2D / 2.5D / 3D / 0.7D / 0.8D / 3.5D / 4D | 1.5D / 2D | 1D / 1.5D / 2D | 1D / 1.5D / 2D / 2.5D / 3D | 1D / 1.5D / 2D | 1D / 1.5D / 2D | 1.5D / 2D / 2.5D | - | - | 1D / 1.5D / 2D / 2.5D / 3D | 1D / 1.5D / 2D / 2.5D / 3D | 1D | - | 1.5D | 0.5D / 0.8D | 1D / 1.5D / 2D | 1D / 1.5D / 2D | 1D / 1.5D / 2D | 1D / 1.5D / 2D | 1.5D / 2D / 2.5D | - | 1D / 1.5D / 2D | 1D / 1.5D / 2D / 3D | 1D / 1.5D / 2D / 3D | 1.5D | 1D / 1.5D / 2D | 1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D | 1.5D / 2D / 2.5D / 3D / 3.5D | 2D / 2.5D | 1D / 1.5D / 2D |
| Application | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal |
| Notch | Provided | Not Provided | Provided | Not Provided | Provided | Provided | Provided | Provided | Not Provided | Not Provided | Not Provided | Provided | Not Provided | Not Provided | - | Provided | Provided | Provided | Not Provided | Not Provided | Not Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Not Provided | Not Provided | Provided | Provided | Provided | Provided | Provided | Not Provided | Not Provided | Not Provided | Not Provided |
| Thread Dia. (After inserted), Unified(inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1/2-13 ～ #10-24 | - | - | - | 1/2-13 ～ #12-24 | - | - | 1"-8 ～ #10-24 | - | - | - | - | - | 1/2-20 ～ #10-32 | - | 1/2-20 ～ #10-32 | 1"-12 ～ #10-32 | - | - | - | - |
| Shape | - | Slotted | - | Standard | - | - | - | - | Slotted | Standard | Slotted | - | Standard | Standard | - | - | - | - | Standard | - | - | - | - | - | - | - | - | - | - | - | Standard | Standard | - | - | - | - | - | - | Slotted | Standard | Standard | Standard |
| Sales Unit | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Box, Pkg. | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Box, Pkg. | Box, Pkg. | - | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | - | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Box, Pkg. | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Box, Pkg. | Box, Pkg. | Box, Pkg. | Box, Pkg. |
| Cleaning Method | - | - | - | - | - | - | - | - | - | - | Degreasing / Precision Cleaning / Electrolytic Polishing + Precision Cleaning | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
![[Clean & Pack]Self-Tapping Inserts - Slotted](http://content.misumi-ec.com/image/upload/t_product_view_c/v1/p/jp/product/series/110310783359/110310783359_001_20230911105917.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Screw Dia. M (after insertion)(mm)
-
Environmentally friendly
-
Type
-
Characteristics/Applications
-
Material
- Steel
- Stainless Steel (SUS303/304)
- Stainless Steel (SUS316)
- Stainless Steel (SUS430F)
- Brass
- Phosphor Bronze
- Inconel X-750
- Nitrox 60
- Nylon
-
Screw Type
- Metric (Coarse) Thread
- Metric (Fine) Thread
- Unified (Coarse) Thread
- Unified (Fine) Thread
- BSW (Coarse) Thread
-
Length L (after insertion) (D = Thread Dia. M)
-
Application
- Light Metal
- Cast Iron
- Resin General
-
Notch
-
Thread Dia. (After inserted), Unified(inch)
-
Shape
-
Sales Unit
- Low Quantity (Available beginning with 1 pc.)
- Box, Pkg.
-
Cleaning Method
- Degreasing
- Precision Cleaning
- Electrolytic Polishing + Precision Cleaning
Narrow search by specifying Manufacturer
-
- RECOIL (13)
- HIROSUGI-KEIKI (11)
- NIPPON SPREW (5)
- TSUGAMI (4)
- SEL JAPAN (3)
- ACCURATE (1)
- KS SANGYO (1)
- JAPAN DRIVEIT (0)
- ESCO (0)
- TOKAI METAL INDUSTRY (0)
- BOHSEI (0)
- SUNCO (0)
- KKV (0)
CAD
-
- 2D
- 3D
Related Categories to Threaded Inserts
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?