Tapped Punches

• 

  Tapped Punches

  MISUMI

  ・As a measure against bolt breakage, we have expanded the specifications for large diameter tap types and added specifications for extra large diameter taps! ・A punch with a tap that is fixed and held with a bolt. It is easy to replace the punch and adjust the height after re-sharpening the cutting edge. Since there is no brim, it is also recommended for punching at narrow pitches. ・If you are worried about bolt breakage when punchin...Readmore

  • BOLT
  • SKD11
  • POWDER HSS

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Tapped Jector Punches Normal, WPC treatment

  MISUMI

  This is a type of punch that is fixed with a bolt. It is easy to adjust the punch height after re-sharpening the cutting edge. A jetter pin for removing scraps is built into the punch.

  • BOLT
  • SKD11
  • POWDER HSS
  • WPC

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Tapped Punches Dicoat treatment, TiCN Coating

  MISUMI

  -Added specifications for large diameter tap type and extra large diameter tap type to prevent bolt breakage! ・A punch with a tap that is fixed and held with a bolt. It is easy to replace the punch and adjust the height after re-sharpening the cutting edge. Since there is no brim, it is also recommended for punching at narrow pitches. ・If you are worried about bolt breakage when punching thick plates or high-tensile steel materials, please try th...Readmore

  • BOLT
  • POWDER HSS
  • TiCN
  • DICOAT

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• 

  Tapped Punches WPC treatment, HW Coating

  MISUMI

  -Added specifications for large diameter tap type and extra large diameter tap type to prevent bolt breakage! ・A punch with a tap that is fixed and held with a bolt. It is easy to replace the punch and adjust the height after re-sharpening the cutting edge. Since there is no brim, it is also recommended for punching at narrow pitches. ・If you are worried about bolt breakage when punching thick plates or high-tensile steel materials, please try th...Readmore

  • BOLT
  • SKD11
  • POWDER HSS
  • HW
  • WPC

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Double Stepped Tapped Punches

  MISUMI

  ・As a measure against bolt breakage, we have expanded the specifications for large diameter tap types and added specifications for extra large diameter taps! ・A punch with a tap that is fixed and held with a bolt. It is easy to replace the punch and adjust the height after re-sharpening the cutting edge. Since there is no brim, it is also recommended for punching at narrow pitches. ・A punch with a guide section separate from the cuttin...Readmore

  • BOLT
  • SKD11
  • POWDER HSS

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Tapped Punches DLC Coating

  MISUMI

  -Added specifications for large diameter tap type and extra large diameter tap type to prevent bolt breakage! ・A punch with a tap that is fixed and held with a bolt. It is easy to replace the punch and adjust the height after re-sharpening the cutting edge. Since there is no brim, it is also recommended for punching at narrow pitches. ・If you are worried about bolt breakage when punching thick plates or high-tensile steel materials, please try th...Readmore

  • BOLT
  • SKH51
  • POWDER HSS
  • DLC

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Tapped Punches RW Coating

  MISUMI

  -Added specifications for large diameter tap type and extra large diameter tap type to prevent bolt breakage! ・A punch with a tap that is fixed and held with a bolt. It is easy to replace the punch and adjust the height after re-sharpening the cutting edge. Since there is no brim, it is also recommended for punching at narrow pitches. ・If you are worried about bolt breakage when punching thick plates or high-tensile steel materials, please try th...Readmore

  CAD ：

  2D / 3D

  Days to Ship:	7 Day(s) or more

Loading...