(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (SGT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Different Diameter Straight KGH Stainless Steel One-Touch Fitting, KG Series. (Part Numbers)
- On Sale Till 31/03/2025
- Volume Discount
SMC quick-connect fitting.
[Features]
・ Stainless steel specifications that can be used in a corrosion resistant environment
・ SUS303 is used for the metal material part
・ It can be used in CRT lines that dislike copper ions, water cleaning of food equipment that is exposed to water or salt water, and in cleanrooms that dislike dust generation due to discoloration and rust of copper materials
[Applications]
・ Used for connecting tubes of different sizes
(i)Caution
- The minimum order quantity varies depending on the selected model. Please check the quotation / order screen for details.
- For materials and specification details, please refer to the catalog.
- Product images may be representative images. Refer to the catalog for shape details.
Different Diameter Straight: KGH Outline Drawing And Dimensions
Different Diameter Straight: KGH outline drawing
| Applicable tubing outer diameter (mm) | Model | øDNote) | L | M1 | M2 | Effective cross-sectional area (mm2) | Weight g | ||
|---|---|---|---|---|---|---|---|---|---|
| (a) | (b) | Nylon | Urethane | ||||||
| 4 | 6 | KGH04-06 | 12.8 | 34.5 | 16 | 17 | 5.6 | 4 | 5 |
| 6 | 8 | KGH06-08 | 15.2 | 38.5 | 17 | 18.5 | 13.1 | 10.4 | 6 |
| 8 | 10 | KGH08-10 | 18.5 | 42 | 18.5 | 21 | 26.1 | 18.0 | 11 |
| 10 | 12 | KGH10-12 | 20.9 | 44.5 | 21 | 22 | 41.5 | 29.5 | 14 |
Note) øD is the maximum diameter.
One-Touch Fitting Stainless Steel KG Series Common Specifications (Reference)
Structure
KG Series structure
Applicable Tubing
| Tube materials | FEP, PFA, nylon, soft nylonNote 1), polyurethane |
|---|---|
| Tube outer diameter | ø4, ø6, ø8, ø10, ø12, ø16 |
Note 1) For soft nylon tube, water cannot be used.
Specifications
| Usable fluids | Air, waterNote 2) | |
|---|---|---|
| Operating pressure rangeNote 3) | -100 kPa to 1 MPa | |
| Proof pressure | 3 MPa | |
| Ambient and fluid temperature | -5 to 60°C, if water is used then 0 to 40°C (no freezing) | |
| Thread | Mounting section | JIS B 0203 (taper thread for piping) JIS B 0205 (metric coarse thread) |
| Nut part | JIS B 0205 (metric fine thread) | |
| Thread sealant | With sealantNote 4) Or, without sealants | |
Note 2) The surge pressure must be under the maximum operating pressure.
Note 3) Do not use the fittings with a leak tester or for vacuum retention because they are not guaranteed for zero leakage.
Note 4) Add the suffix "S" to the part number if w/ seal is desired.
Principle Part Materials
| Body | SUS303, PBT |
|---|---|
| Stud | SUS303 (thread portion) |
| Chuck | SUS304 |
| Guide | SUS304, SUS303, PBT |
| Collet, release button | POM |
| Seal, O-ring | NBR |
| Gasket | SUS304/NBR |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Packing, Material of O-Ring | Applicable Tube O.D.1 (φ) | Applicable Tube Outer Diameter 2 (φ) | Specifications | Release button color | Custom-made specifications |
|---|---|---|---|---|---|---|---|---|---|---|
SGD 23.22 SGD 11.84 | 1 Piece(s) | Available | Same day | [Standard (NBR Nitrile Rubber )] NBR | 4 | 6 | ISO Class：6 | White | N/A | |
- | 2 Piece(s) | Quote | [Standard (NBR Nitrile Rubber )] NBR | 4 | 6 | ISO Class：6 | White | Lubricant: white petroleum jelly, release bushing color change | ||
- | 2 Piece(s) | Quote | [Standard (NBR Nitrile Rubber )] NBR (fluorine coated) | 4 | 6 | ISO Class：6 | Light Blue | Non-grease specification, rubber material・release push color change | ||
SGD 25.55 | 2 Piece(s) | Available | 32 Day(s) | [Standard (NBR Nitrile Rubber )] NBR (fluorine coated) | 4 | 6 | ISO Class：6 | Light Blue | Non-grease specification, rubber material / release bush color change, clean specification (copper-based non-specification, air blow, double packaging, resin body: white) | |
SGD 24.85 | 1 Piece(s) | Available | 32 Day(s) | [Standard (NBR Nitrile Rubber )] NBR | 6 | 8 | ISO Class：6 | White | N/A | |
- | 2 Piece(s) | Quote | [Standard (NBR Nitrile Rubber )] NBR | 6 | 8 | ISO Class：6 | White | Lubricant: white petroleum jelly, release bushing color change | ||
- | 2 Piece(s) | Quote | [Standard (NBR Nitrile Rubber )] NBR (fluorine coated) | 6 | 8 | ISO Class：6 | Light Blue | Non-grease specification, rubber material・release push color change | ||
- | 1 Piece(s) | Quote | [Fluororubber] Fluorine Rubber | 6 | 8 | ISO class: 6 | White | Changed to rubber material | ||
- | 2 Piece(s) | Quote | [Standard (NBR Nitrile Rubber )] NBR (fluorine coated) | 6 | 8 | ISO Class：6 | Light Blue | Non-grease specification, rubber material / release bush color change, clean specification (copper-based non-specification, air blow, double packaging, resin body: white) | ||
SGD 31.50 SGD 16.07 | 1 Piece(s) | Available | Same day | [Standard (NBR Nitrile Rubber )] NBR | 8 | 10 | ISO Class：6 | White | N/A | |
- | 2 Piece(s) | Quote | [Standard (NBR Nitrile Rubber )] NBR | 8 | 10 | ISO Class：6 | White | Lubricant: white petroleum jelly, release bushing color change | ||
- | 2 Piece(s) | Quote | [Standard (NBR Nitrile Rubber )] NBR (fluorine coated) | 8 | 10 | ISO Class：6 | Light Blue | Non-grease specification, rubber material・release push color change | ||
- | 2 Piece(s) | Quote | [Standard (NBR Nitrile Rubber )] NBR (fluorine coated) | 8 | 10 | ISO Class：6 | Light Blue | Non-grease specification, rubber material / release bush color change, clean specification (copper-based non-specification, air blow, double packaging, resin body: white) | ||
- | 2 Piece(s) | Quote | [Fluororubber] Special FKM (Fluorine Coating) | 8 | 10 | ISO Class：6 | Light Blue | Non-grease specification, rubber material・release push color change | ||
SGD 37.10 | 1 Piece(s) | Available | 32 Day(s) | [Standard (NBR Nitrile Rubber )] NBR | 10 | 12 | ISO Class：6 | White | N/A | |
- | 2 Piece(s) | Quote | [Standard (NBR Nitrile Rubber )] NBR | 10 | 12 | ISO Class：6 | White | Lubricant: white petroleum jelly, release bushing color change | ||
- | 2 Piece(s) | Quote | [Standard (NBR Nitrile Rubber )] NBR (fluorine coated) | 10 | 12 | ISO Class：6 | Light Blue | Non-grease specification, rubber material・release push color change | ||
SGD 39.43 | 2 Piece(s) | Available | 32 Day(s) | [Standard (NBR Nitrile Rubber )] NBR (fluorine coated) | 10 | 12 | ISO Class：6 | Light Blue | Non-grease specification, rubber material / release bush color change, clean specification (copper-based non-specification, air blow, double packaging, resin body: white) |
Loading...
Basic Information
| Types | Single-Action | Fitting Type | Union with different diameters | Applicable Fluid | Water / Air |
|---|---|---|---|---|---|
| Body Material | SUS303+PBT | Application | Clean circumstance / Foods・Drug-Related | Union, Unequal Dia. | Reducing Straight |
| Operating Temperature(°C) | -5::60 | Number of Connection Tubes(piece) | 2 |
Specification/Dimensions
-
Packing, Material of O-Ring
- Standard (NBR Nitrile Rubber )
- Fluororubber
- Standard (NBR Nitrile Rubber )
-
Applicable Tube O.D.1(φ)
-
Applicable Tube Outer Diameter 2(φ)
-
Specifications
- ISO Class：6
- ISO class: 6
-
Release button color
- Light Blue
- White
-
Custom-made specifications
- Changed to rubber material
- Lubricant: white petroleum jelly, release bushing color change
- N/A
- Non-grease specification, rubber material / release bush color change, clean specification (copper-based non-specification, air blow, double packaging, resin body: white)
- Non-grease specification, rubber material・release push color change
-
type
- KGH
Days to Ship
-
- All
- Same day
- 32 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(65) 6733 7211 / FAX：(65) 6733 0211
- 9:00am - 6:00pm (Monday - Friday)
- Technical Inquiry
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?