PLC (Input/Output Units)（Page2）

• 

  CC-Link Input/Output Unit

  MITSUBISHI

  CC-Link Input/Output Unit (Input)

  Standard Price:	SGD 169.00-
  Days to Ship:	60 Day(s) or more

• 

  L Series DC Input / Transistor Output Combined Unit

  MITSUBISHI

  L Series DC input / transistor output combined unit

  Days to Ship:	Quote

• 

  L Series Output Unit

  MITSUBISHI

  - L Series Output Unit from MITSUBISHI.
  - 4 types of output available, Contact output (LY18R2A), Triac output (LY20S6, LY28S1A), Transistor output Sink type (LY40NT5P) and Transistor output Source type (LY40PT5P, LY41PT1P, LY42PT1P).
  - Numbers of output can select up to 64 channels.
  - Power supply voltage: 24 V DC/240 V AC (Contact output, Transistor output), 100 to 240 V AC (Triac output).
  - Max. load current can be select up to 2 A per point.
  

  Days to Ship:	Quote

• 

  L Series Input Unit

  MITSUBISHI

  Output unit for L series.

  Days to Ship:	Quote

• 

  L Series Multi-Input Unit

  MITSUBISHI

  Multi-input unit for L series.

  Days to Ship:	Quote

• 

  NX Series Digital Output Unit NX-OD Transistor Output Unit

  OMRON

  Digital output unit that is available in many variations, from high-speed types that enable high-speed synchronization control to general-purpose types
  
  ■ Features
  · Can be mounted on an EtherCAT coupler to enable high-speed I/O refreshing
  · Enables I/O refreshing synchronized with the controller control period (synchronous refresh)
  · Using this unit in combination with an NX Series CPU Unit or EtherCAT Coupler Unit, an NX unit that uses a time stamping input method,
  and an NX unit that uses a time-specific output method enables highly precise I/O control that does not depend on the
  controller's control period
  · The use of a removable terminal block improves system maintainability
  · The Push-In Plus terminal block (screwless clamp terminal block) and connector type (MIL connector / Fujitsu connector)
  greatly reduce the time required for wiring work
  · A unit width of only 12 mm realizes space saving (connector type 30 mm)
  · 2-, 4-, 8-, 16- and 32-output-contact types are available, enabling the I/O configuration that best suits your equipment
  · Connect to the CJ Series using the EtherNet/IP coupler

  Standard Price:	SGD 134.17-
  Days to Ship:	4 Day(s) or more

• 

  NX Series Digital Input/Output Combined Unit NX-MD DC Input / Transistor Output Unit

  OMRON

  Digital input unit that is available in many variations, from high-speed types that enable high-speed synchronization control to general-purpose types
  
  ■ Features
  · Can be mounted on an EtherCAT coupler to enable high-speed I/O refreshing
  · Enables I/O refreshing synchronized with the controller control period (synchronous refresh)
  · Using this unit in combination with an NX Series CPU Unit or EtherCAT Coupler Unit, an NX unit that uses a time-stamping input method,
  and an NX unit that uses a time-specific output method enables highly precise I/O control that does not depend on the
  controller's control period
  · The use of a removable terminal block improves system maintainability
  · The Push-In Plus terminal block (screwless clamp terminal block) and connector type (MIL connector / Fujitsu connector)
  greatly reduce the time required for wiring work
  · A unit width of only 12 mm realizes space saving (connector type 30 mm)
  · Connect to the CJ Series using the EtherNet/IP coupler

  Standard Price:	SGD 406.02
  Days to Ship:	4 Day(s) or more

• 

  NX Series Digital Input Unit NX-ID DC Input Unit

  OMRON

  Digital input unit that is available in many variations, from high-speed types that enable high-speed synchronization control to general-purpose types
  
  ■ Features
  · Can be mounted on an EtherCAT coupler to enable high-speed I/O refreshing
  · Enables I/O refreshing synchronized with the controller control period (synchronous refresh)
  · Using this unit in combination with an NX Series CPU Unit or EtherCAT Coupler Unit, an NX unit that uses a time-stamping input method,
  and an NX unit that uses a time-specific output method enables highly precise I/O control that does not depend on the
  controller's control period
  · The use of a removable terminal block improves system maintainability
  · The Push-In Plus terminal block (screwless clamp terminal block) and connector type (MIL connector / Fujitsu connector)
  greatly reduce the time required for wiring work
  · A unit width of only 12 mm realizes space saving (connector type 30 mm)
  · 4-, 8-, 16- and 32-input-contact types are available, enabling the I/O configuration that best suits your equipment
  · Connect to the CJ Series using the EtherNet/IP coupler

  Standard Price:	SGD 134.17-
  Days to Ship:	4 Day(s) or more

• 

  NX Series Incremental Encoder Input Unit NX-EC0□□□

  OMRON

  Enables more precise timing control by synchronizing the encoder data with the time data
  
  ■ Features
  · Open-collector-output type and line-driver-output type incremental encoders can be connected
  · High-speed remote I/O control with communications cycle as fast as 125 μs*1
  · Free-run refreshing, synchronous I/O refreshing, or
  task period prioritized refreshing*2 with the NX1P2 CPU Unit or EtherCAT Coupler Unit
  · The MC Function Module of the NJ/NX/NY5 Controllers allows the encoder
  to be used as a motion axis
  · Latching (1 internal signal and 2 input signals from external devices)
  · Pulse period measurement
  · 32-bit counters (80000000 to 7FFFFFFF HEX)
  · Maximum counting rate: 4 MHz (Line receiver: 4 MHz; Open collector: 500 kHz)
  · Time stamping
  · Maximum and minimum counter value setting
  · Connect to the CJ PLC using the EtherNet/IP coupler
  
  *1 When using the NX-EC01□□ together with the NX701-□□□□ and NX-ECC203.
  *2 Task period prioritized refreshing is available when the NX-ECC203 is used together.

  **ขอราคาวันนี้ รับเลยของรางวัล ไม่ต้องลุ้น ถึง 31 ต.ค.นี้ ดูรายละเอียด ที่นี่

  Standard Price:	SGD 858.85-
  Days to Ship:	4 Day(s) or more

• 

  NX Series Safety I/O Unit NX-SI / SO

  OMRON

  Adds a Safety CPU Unit and Safety I/O Unit to an EtherCAT coupler to enable unified safety control
  
  ■ Features
  · EN ISO 13849-1 (PLe / Safety Category 4), IEC 61508 (SIL3) certified
  · Incorporating the Safety over EtherCAT (FSoE)* protocol enables both standard control and safety control on the same EtherCAT
  · There are 2 types of Safety Input Unit: a 4-point type and an 8-point type, and 2 types of Safety Output Unit, a 2-point type and a 4-point type
  · Safety units can be freely combined and placed with standard units
  
  *The open protocol Safety over EtherCAT (abbreviated as FSoE; "FailSafe over EtherCAT") defines a
  safety-related communication layer for EtherCAT.
  Complies with the requirements of IEC 61508 (SIL3), enabling communication of safety data and standard data on the same communication system without
  communication speed or cycle time restrictions.

  Standard Price:	SGD 300.36
  Days to Ship:	4 Day(s) or more

• 

  MELSEC iQ-F Series Spring Clamp Terminal Block Type I/O Unit

  MITSUBISHI

  - MELSEC iQ-F Series Spring Clamp Terminal Block Type I/O Unit from MITSUBISHI.
  - No crimp connectors and crimp tools are needed. Wiring can be performed just by preparing cables, and wiring man-hours can be reduced.
  - Compact, lightweight body also cuts shipping costs. Build systems containing both relay outputs and transistor outputs.
  - Simple CPU communication function, Device information can be shared with simple parameter settings, so the programming man-hours can be reduced.
  - Web server function, View the system status even from a remote location.
  

  Standard Price:	SGD 246.40-
  Days to Ship:	91 Day(s)

• 

  MELSEC iQ-F Input/Output Expansion Block (Input/Output Unit) FX5

  MITSUBISHI

  Input/output expansion block that receives power from the basic / power supply unit of the MELSEC iQ-F series.
  [Features]
  ・ It can be connected to the back of a basic unit or expansion unit
  [Applications]
  ・ Convenient for expanding input/output, receiving power supply from a basic unit or expansion unit
  ・ It can be used for FX5UJ, FX5U, FX5UC, etc.

  Standard Price:	SGD 246.40-
  Days to Ship:	91 Day(s)

• 

  CC-Link IE Field Network, Block Type Remote Unit Expansion Unit

  MITSUBISHI

  [CC-Link IE Field Network, Block Type Remote Unit]
  ・ CC-Link IE field network remote device station. Input/output devices can be more easily distributed according to the equipment
  ・ You can easily add the number of input/output points by connecting expansion units
  ・ It supports CC-Link IE field network synchronous communication function. Since the operation can be performed according to the synchronization cycle of the master station that supports the synchronous communication function, the operation timings of multiple slave stations can be aligned
  ・ Units that support the fast link-up function can quickly return to the line when the CC-Link IE field network is disconnected and then reconnected
  ・ Units that support the automatic I/O parameter setting function can operate the input/output unit without setting parameters, so the startup time can be shortened

  Days to Ship:	Quote

• 

  Input Module, CPX Series

  FESTO

  Standard Price:	SGD 157.75-
  Days to Ship:	Quote

Loading...