Connectors (Options, Others)

• 

  3M^TM MDR System Non-Shielded Shell Kit (Straight Type)

  3M

  [Features]
  · Half-pitch I/O connector "Industry Standard Product" MDR system.
  · Two mating and fixing systems. The jack screw and single-action locking systems can be used to match the application.
  · Compatible with soldered plugs and ordinary pressure contact type plugs.
  · The structure is comprised of two identically shaped pieces for ease of assembly and strength.
  · The ground plate provides efficient shielding.

  Standard Price:	SGD 6.12-
  Days to Ship:	Same day or more

• 

  D-Sub Series, Accessory

  JAPANAVIATION

  This is a D sub series accessory.
  
  [Features]
  ■Straight clamp plastic split type D * -C1 (C2)-J * model
  • After making the connection, fix by turning both lock-side screws to join partnering sides with the latch fixing block.
  • There are 3 types of match retention screws: M2.6, M3, and #4-40.
  ■Straight clamp plastic split type D * -C8-J * -B model
  • The match retaining screws and corresponding connectors contain both short-type screws for use with a screw driver (flat or Phillips) as well as long-type screws for tightening by hand. Screws include both millimeter and inch measurement specifications.
  • Split-type junction shell.
  • D*-C1, D*-C2, D*-C8-junction shell (clamp hood) types include two-piece construction for easy access after wiring.

  • Volume Discount

  Standard Price:	SGD 1.40-
  Days to Ship:	Same day or more

• 

  Gasket for D / MS A / B Series Waterproof Connector (R1)

  DDK

  Gasket for D/MS series receptacle connectors.
  [Features]
  ・ Using in a waterproof receptacle connector with a flange prevents water from seeping through the gap between the flange and the housing.

  Standard Price:	SGD 4.53-
  Days to Ship:	7 Day(s) or more

• 

  MISUMI Waterproof Connector, Waterproof Cable Clamp

  MISUMI

  [Specifications]·A low-cost metric thread waterproof clamp · Attach to the cable exit of the hood or relay base for to hold the cable and waterproof the connection.

  • Volume Discount

  • Aluminum Die Cast
  • 2DCAD

  CAD ：

  2D

  Standard Price:	SGD 6.24-
  Days to Ship:	4 Day(s) or more

• • On Sale Till 31/03/2025

  

  17JE Series Hood Kits

  DDK

  The 17JE series hood kit.
  
  [Features]
  • Each hood is made of plastic, making them lightweight and compact.
  • The plastic is nickel plated to provide effective EMI shielding.

  Standard Price:	SGD 4.40-
  	Special Price
  Days to Ship:	Same day or more

• 

  JL04V Series, Accessory

  JAPANAVIATION

  [Features]
  ▪ Accessories of JL04V series.

  • Volume Discount

  Standard Price:	SGD 5.83-
  Days to Ship:	3 Day(s) or more

• 

  D-sub Connector Panel Mounting Accessory (Dedicated for Gender Changer)

  MISUMI

  [Specifications]·An accessory that can be mounted on panels with a thickness of 2.3 mm · Compatible with 9- and 25-core cables commonly used in RS232C communication.

  • Volume Discount

  CAD ：

  2D

  Standard Price:	SGD 7.17-
  Days to Ship:	3 Day(s) or more

• 

  Cable Bushing for NJC Series

  NANABOSHI

  [Features]
  ·Used in cable clamps of plugs and adapters.
  ·Used in thin cables or discrete wires.

  Standard Price:	SGD 2.06-
  Days to Ship:	3 Day(s) or more

• 

  MDR System, Shell Kit For Wire Mount Receptacle

  3M

  [Features]
  · Half-pitch I/O connector "Industry Standard Product" MDR system.
  · Enables extended wire mounting receptacle connections between devices for relay purposes.
  · Latching mechanisms on plug shells can be used without changing.

  Standard Price:	SGD 11.32-
  Days to Ship:	3 Day(s) or more

• • On Sale Till 31/03/2025

  

  D-Sub Connector, SMT Type, XM3, Fixture

  OMRON

  [Specifications]·D-sub connector SMT type XM3 fixture. ·Type: screw (for fixture, mounting hole M3)

  Standard Price:	SGD 1.57
  	Special Price
  Days to Ship:	Same day

• 

  Waterproof Straight Back Shell for CE01 Series (R1)

  DDK

  Back shell for CE01 Series connectors.
  [Features]
  ・ It is used to hold the cable when not using a conduit.
  ・ Please use it together with the waterproof cable clamp.
  [Applications]
  ・ The back shell is attached to the back of the connector, and the cable clamp is attached to the back of the back shell.

  Standard Price:	SGD 13.14-
  Days to Ship:	4 Day(s) or more

• 

  MS Connector Waterproof Cable Clamp (R1)

  DDK

  [Specifications]·DMS Series waterproof cable clamp. ·Please select the appropriate size, etc.

  • Volume Discount

  Standard Price:	SGD 9.96-
  Days to Ship:	7 Day(s) or more

• 

  MIXO Modular Accessories

  ILME

  MIXO Modular Accessories. Supports large currents up to 200 A, high voltage up to 5, 000 V, high density, air piping, LANs, USBs, and optical fiber, coaxial, and Dsub9Pin connectors.
  
  [Features]
  · MIXO modular accessories.
  · Supports large currents up to 200 A, high voltage up to 5, 000 V, high density, air piping, LANs, USBs, and optical fiber, coaxial, and Dsub9Pin connectors.

  Standard Price:	SGD 1.19-
  Days to Ship:	3 Day(s) or more

• 

  Compressed Contact Tools and Accessories

  ILME

  Compressed contact tools and accessories

  Standard Price:	SGD 64.60-
  Days to Ship:	3 Day(s) or more

• • On Sale Till 31/03/2025

  

  D-Sub Connector, Fixture (Screw Head Length: 4.8 mm)

  OMRON

  [Specifications]·D-sub connector fixture. ·Type: Locking screw for D-sub connector

  Standard Price:	SGD 1.25-
  	Special Price
  Days to Ship:	Same day

• • On Sale Till 31/03/2025

  

  D-Sub Connector, Fixture (Screw Head Length: 5.8 mm)

  OMRON

  [Features]
  ・ D-sub connector fixture (Screw Head Length 5.8 mm)

  Standard Price:	SGD 1.63
  	Special Price
  Days to Ship:	Same day

• 

  CE05 Series Waterproof Straight Back Shell (R1)

  DDK

  A back shell for CE05 Series connectors.
  [Features]
  ・ CE05 waterproof back shell used to hold cables when not using a conduit.
  [Applications]
  ・ A back shell is attached to the rear of the connector, and a waterproof cable clamp is attached to the back of the rear of the back shell.

  Standard Price:	SGD 14.85-
  Days to Ship:	7 Day(s) or more

• 

  e-CON Dust-Proof Cover

  MISUMI

  [Specifications]·A dust-proof cover dedicated for e-CON, mountable before or after installation

  • Volume Discount

  • IP54

  Standard Price:	SGD 5.21
  Days to Ship:	4 Day(s) or more

• 

  Dynamic Connector Accessory (Metal Panel Securing Tool)

  TE Connectivity

  Metal panel fixing tool for D3100/D3200 relays.
  
  [Features]
  ・Used for fixing free-hanging tab housings to a panel surface.

  Standard Price:	SGD 1.41-
  Days to Ship:	Same day or more

• 

  MDR System Non-Shield Shell Kit (Right Angle Type)

  3M

  [Features]
  · The highly requested 'dual-side attachment' and 'single-latch, single-screw attachment' types are now on sale as shell kits.
  · Half-pitch I/O connector "Industry Standard Product" MDR system.
  ▪ Mating and fixing systems of jack screw and single-action lock, as well as single-action lock combined types from their combination that can be properly used according to the application .
  · 60° right angle shell that achieves space savings with the cable extraction part.
  · Compatible with soldered plugs and pressure contact type plugs.
  · A two-piece structure to achieve both ease of assembly and strength.
  · Ground plate for efficient shielding.

  Standard Price:	SGD 10.97-
  Days to Ship:	4 Day(s) or more

• 

  MDR System Non-Shield Shell Part

  3M

  A 2-piece structure combining ease of assembly with strength. Effective shield processing provided by ground plate
  
  [Features]
  · Shell parts sold individually according to needs.
  · Half-pitch I/O connector "Industry Standard Product" MDR system.
  ▪ Mating and fixing systems of jack screw and single-action lock, as well as single-action lock combined types from their combination that can be properly used according to the application .
  · 60° right angle shell that achieves space savings with the cable extraction part.
  · Compatible with soldered plugs and pressure contact type plugs.

  Standard Price:	SGD 8.01-
  Days to Ship:	4 Day(s) or more

• 

  3M^TM Standard Socket / Header Ejector Latch

  3M

  [Features]
  · An ejector latch (header clip) for standard sockets/headers.

  Standard Price:	SGD 0.99
  Days to Ship:	3 Day(s) or more

• 

  3M^TM Standard Socket / Header Socket Connector Strain Relief

  3M

  A 79XX Series strain relief for standard socket/header socket connectors.
  
  [Features]
  Compatible with various headers and plug connectors for standard sockets/headers.
  ▪ Available in 12 varieties of pin combinations from 10 pins to 64 pins.
  ▪ Also supports wiring by pressure contact with a 1.27-mm pitch flat cable, as well as a daisy chain.
  · Prepared with a closed end type cover that prevents exposure of the cut surface of the cable as well as a low-profile strain relief that is 1.5 mm lower than a standard strain relief.
  · Film-based extraction tabs can be attached for extraction (J3490-X).
  ▪ Accessory key can be used to prevent incorrect insertion between the same number of pins (J3435-0000).

  Standard Price:	SGD 0.87-
  Days to Ship:	3 Day(s) or more

• 

  3M^TM 2.0-mm Pitch I/O Connector Shell Kit

  3M

  [Features]
  ・ Both large diameter cable connection and space saving are achieved
  ・ EMI/ESD countermeasure product
  ・ By expanding the internal space of the inner metal shell, it is easier to accommodate cables and the shell is easier to assemble
  ・ Achieves high operability with single-action lock
  ・ Connector for servo amplifier encoder
  ・ Product design that takes cable connection work into consideration to improve work efficiency and quality stability
  [Applications]
  ・ Shell kit for wire mount plug, which is a 2.0-mm pitch 6-pole connector for connecting cables in industrial equipment

  Standard Price:	SGD 12.17
  Days to Ship:	4 Day(s) or more

• • On Sale Till 31/03/2025

  

  Stud 17L-002C

  DDK

  Stud (mating securing base).
  [Features]
  · Used when connecting hooded connectors together or to secure a connector to a panel.

  Standard Price:	SGD 0.72-
  	Special Price
  Days to Ship:	Same day

• 

  Comb-Type Jumper (Insulation) for MCS-MIDI Male /Female Connector

  WAGO

  [Features]
  ● Commoning by adjoining jumpers.
  ● The connector plug remains commoned even after it is disconnected.
  ● By using this jumper bar, no additional on-site cables are required.
  ● Easy-to-configure connector circuitry supporting a variety of applications.
  [Specifications]
  ● Applicable pin pitch: 5/5.08 mm ● Terminals: 2 ● Rated current: 12 A

  Standard Price:	SGD 1.86
  Days to Ship:	3 Day(s) or more

• 

  Dust-proof Cover For Spring Type Connector

  WAGO

  Spring connector dust cover for the 734, 721, and 231 series. Simply placing the cover on the connector will provide a dust-blocking effect.

  Standard Price:	SGD 30.06-
  Days to Ship:	4 Day(s) or more

• 

  Automotive Connector Housing DEUTSCH DRC Series

  TE Connectivity

  This product is a DEUTSCH connector (option/other).

  Standard Price:	SGD 22.09-
  Days to Ship:	7 Day(s) or more

• • On Sale Till 31/03/2025

  

  Cable Clamp for MS Connectors

  MISUMI

  [Specifications]·A low-cost type MS cable clamp · By attaching it to the MS connector and tightening the cable, it is possible to reduce the load on the cable end and prevent disconnection.

  • Volume Discount

  • MIL

  CAD ：

  2D

  Standard Price:	SGD 6.33-
  	Special Price
  Days to Ship:	Same day or more

• 

  Spring Lock For D-sub Connector

  HIROSE ELECTRIC

  [Specifications]·Spring lock for D-sub connector. ·Compatible series: CTF Series. Operating temperature range (°C): -25 to +70

  Standard Price:	SGD 2.19-
  Days to Ship:	4 Day(s) or more

• • On Sale Till 31/03/2025

  

  D-sub Connector Lock Metal Fitting【2 Pieces Per Package】

  HIROSE ELECTRIC

  [Features]
  ▪ SM series (D-sub).
  · A locking bracket accessory.

  Standard Price:	SGD 2.78-
  	Special Price
  Days to Ship:	Same day or more

• 

  Square Flanges for RM Series

  HIROSE ELECTRIC

  [Features]
  • By mounting a square flange onto the nut tightened receptacle, it can be used as a flanged receptacle.

  Standard Price:	SGD 2.85-
  Days to Ship:	4 Day(s) or more

• 

  D02-M15 Series, Accessories

  JAPANAVIATION

  [Specifications]·An accessory for D02-M15 Series. ·For rear mount.·4 to 40 imperial thread.·Mating base shape: hexagon (short form)

  Standard Price:	SGD 1.38
  Days to Ship:	3 Day(s) or more

• 

  3M^TM MDR System Plastic Shell Kit

  3M

  [Features]
  · Half-pitch I/O connector "Industry Standard Product" MDR system.
  ▪ EMI/ESD countermeasure items.
  · Single action lock that can be removed with one hand.
  · Shell finish and strength equivalent to one-piece molding.

  Standard Price:	SGD 7.01-
  Days to Ship:	4 Day(s) or more

• 

  3M^TM MDR System Zinc Diecast Shell Kit

  3M

  [Features]
  · Half-pitch I/O connector "Industry Standard Product" MDR system.
  · An EMI-countermeasure product.
  · Single-action lock that can be removed with one hand.
  · Manufactured from tough diecast zinc.

  Standard Price:	SGD 9.51-
  Days to Ship:	4 Day(s) or more

• • On Sale Till 31/03/2025

  

  CE01 Series Back Shell

  DDK

  CE01 series back shell.
  
  [Features]
  • Back shells for holding cable when a conduit is not used.
  • Two lengths are available (in shell sizes 22, 24, and 28) for different wiring needs.
  • Use the back shells with cable clamps.

  Standard Price:	SGD 13.70-
  	Special Price
  Days to Ship:	Same day

• • On Sale Till 31/03/2025

  

  CE02-6A, D/MS (D190) Series Back Shell

  DDK

  This is a CE02-6A, D/MS (D190) series back shell

  Standard Price:	SGD 13.98-
  	Special Price
  Days to Ship:	Same day or more

• • On Sale Till 31/03/2025

  

  Round Connector Non-Waterproof Cable Clamp

  DDK

  Non-waterproof cable clamp for round connector

  Standard Price:	SGD 10.88-
  	Special Price
  Days to Ship:	Same day

• 

  Sensor Connector Relay Box

  MURR

  This is a connector relay box for MURR connectors. Please use when integrating wiring.

  Standard Price:	SGD 81.51
  Days to Ship:	8 Day(s) or more

• 

  COB Type - Panel Supports for Mounting in Control Panels

  ILME

  Connector for internal control panel mounting. Made of flame-resistant thermoplastic resin. Supports DIN rail mounting.
  
  [Features]
  • Connectors made of flame-resistant thermoplastic resin for internal control panel mounting. Supports DIN rail mounting.

  Standard Price:	SGD 12.10-
  Days to Ship:	3 Day(s) or more

• • On Sale Till 31/03/2025

  

  USB Connector, XM7, Dust Cover

  OMRON

  [Features]
  · USB Connector, XM7, Dust Cover.

  Standard Price:	SGD 1.98
  	Special Price
  Days to Ship:	Same day

• • On Sale Till 31/03/2025

  

  Round Waterproof Connector (M12) - XS2 - Connector Cover

  OMRON

  The XS2Z-13 and 15 are connectors with covers (dust covers). The XS2Z-31 is connector with a sputter protective cover.
  [Features]
  · Cover for XS2 round waterproof connectors (M12).
  · XS2Z-13 compatible connectors: Models XS2G / XS2H / XS2M / XS2R.
  · XS2Z-15 compatible connectors: Models XS2C / XS2R / XS2F / XS2P / XW3A / XW3B.
  · XS2Z-31 series compatible connectors: Models XS2F / XS2H / XS2W.
  [Applications]
  · Used for round connectors for XS2 series products.
  

  Standard Price:	SGD 1.09-
  	Special Price
  Days to Ship:	Same day or more

• 

  Strain Relief Housing (Cable Stop Cover) For 734 Series Connector

  WAGO

  MCS-MINI 734 series for the cable stop connector cover.
  
  [Specifications]
  　●Application: CAGE CLAMP® connector for male and female connectors
  　●Applicable pin pitch: 2 types, 3.5 mm and 3.81 mm

  Standard Price:	SGD 3.15-
  Days to Ship:	4 Day(s) or more

• 

  MCS-MIDI Wire Connection Tool

  WAGO

  A tool for use with 231, 232, 721, 722, 723, 731, 732, and 769 Series spring connectors. Connecting and disconnecting wires is made easy by using this tool.

  Standard Price:	SGD 1.73
  Days to Ship:	3 Day(s) or more

• 

  Panel connectors insulated【50-100 Pieces Per Package】

  LAPP

  Insulated panel connectors (type M T and V), UL approved, with Easy Entry Funnel Shape of the plastic sleeve

  Standard Price:	SGD 23.10-
  Days to Ship:	57 Day(s)

Loading...