(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 9/2/2025 to 7:00 (SGT) 10/2/2025. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Chamfer, V-Grooves
[What is a chamfering tool?]
A tool for chamfering of drill holes, etc., which is used for removing burrs on the hole's surface. There are end mills for chamfering, chamfering cutters, inner radius cutters, etc., depending on the application.
| Days to Ship |
|
|---|
-
OSG
TiN coating enables higher speed and longer service life compared to NC-LDS
Standard Price: SGD 22.19- Days to Ship: Same day or more -
Carbide Chamfering Cutter KMC-2
KYOWA SEIKO
[Applications]It can be used for chamfering and horizontal machining. [Features]By using carbide materials with high hardness, it can be used for cutting general steel, heat-treated steel, stainless steel, cast iron, and aluminum.
Standard Price: SGD 48.33- Days to Ship: 4 Day(s) or more -
TS coated carbide chamfer, V grooving end mill, 2-flute
MISUMI
[Features]
·Ideal for chamfering and V-groove
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, delivery times, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
Standard Price: SGD 88.80- Days to Ship: 3 Day(s) or more -
Chamfering Reamer (3-Flute) MC
DAIICHITOOL
[Features]
Chamfering reamers with an overall length of 55 to 95 mm and handle diameters of 8 mm, 10 mm and 12 mm.Standard Price: SGD 47.18- Days to Ship: 6 Day(s) or more -
TS coated carbide chamfering end mill, 3-flute / short model
MISUMI
[Features]
·Ideal for chamfering (V-groove is not possible as there is no cutting flute on the tip).
·Peripheral flutes enable inclined, contour and helical cutting
·The 3-flute shape enables the feed rate to be improved up to 1.5 times that of the 2-flute type
·With helix angle on the peripheral flutes
·Can also be used as a deburring tool
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties- Volume Discount
- TS
- General Steel
- 3 Flutes
- S (Short)
Standard Price: SGD 95.27- Days to Ship: 3 Day(s) or more -
NT TOOL
For machining non-viscous materials
[Features]
· A wide range of chamfering sizes with one unit.
· Beautiful cut surfaces with zero chatter.
· Easy positioning.
· Uses Cobalt HSSStandard Price: SGD 39.98- Days to Ship: 3 Day(s) or more -
NS TOOL
[Features]
· It allows easy chamfer edge machining.
[Part Number: NSCV-4]
cutting diameter (D) (mm): 4
Blade length (mm): 2
Shank diameter (d) (mm): 4
Overall length (mm): 60
Minimum order quantity: 1 pc.
[Part Number: NSCV-6]
cutting diameter (D) (mm): 6
Blade length (mm): 3
Shank diameter (d) (mm): 6
Overall length (mm): 70
Minimum order quantity: 1 pc.Standard Price: SGD 93.70- Days to Ship: 11 Day(s) -
Standard Price: SGD 28.03- Days to Ship: 3 Day(s) or more -
OSG
Tip angles are available in 90° (45° chamfer), 120° and 130° (EX-Gold drill centering for inclined/curved surfaces).
Standard Price: SGD 16.11- Days to Ship: 3 Day(s) or more -
Carbide Solid Chamfering Endmill 3-Flute
DIXI
High rigidity, high precision, compact chisel structure enables high precision positioning, accurate positioning on curved and sloped surfaces, and high-quality chamfering.
Standard Price: SGD 62.74- Days to Ship: 11 Day(s) or more -
FUKUDA
End mill for R chamfering.
[Features]
·The use of a straight blade makes it easy to re-grind and has excellent cost performance.
·The shank diameter is designed to be thick, making it rigid.
·A rich lineup from R0.5 to 30.
[Applications]
·Ideal for R chamfering.Standard Price: SGD 82.42- Days to Ship: 4 Day(s) or more -
EIKOSHA
Chamfering New chamfering milling cutter with 1 flute.
[Features]
·Can be re-polished.
·A shape that does not chatter when chamfering.Standard Price: SGD 134.92 Days to Ship: 4 Day(s) or more -
- On Sale Till 31/03/2025
NT TOOL
For machining non-viscous materials
[Features]
· A wide range of chamfering sizes with one unit.
· Beautiful cut surfaces with zero chatter.
· Easy PositioningStandard Price: SGD 21.05- Special Price Days to Ship: 3 Day(s) or more -
Mini Corner Round Cutter MCRC (SKH56)
TAIYO-TOOL
[Applications]
· Round chamfer
[Single Blade / Double Blade]
· Single blade
[Tool Grade]
· High-speed steel
[Coating Y/N] N
[Coating Type] Non-Coated
[Flute No.] 1-FluteStandard Price: SGD 106.90- Days to Ship: 3 Day(s) or more -
TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model
MISUMI
Ideal for the Deep Chamfering of Workpieces
- Volume Discount
- TS
- General Steel
- 2 Flutes
Standard Price: SGD 100.74- Days to Ship: 3 Day(s) or more -
High-Speed Steel Chamfering End Mill, 2-Flute / Short
MISUMI
Chamfering end mill with the angle that can be freely selected in 1° increments
- Non-Coated
- 2 Flutes
- S (Short)
Days to Ship: 6 Day(s) or more -
XAL Series Carbide Chamfer End Mill 2-Flute
MISUMI
XAL Series Carbide Chamfer End Mill 2-Flute
- Volume Discount
Standard Price: SGD 56.45- Days to Ship: 3 Day(s) or more -
2-flute, Long Shank, Spiral Chamfering Cutter FX-LS-SCC
OSG
Long shank type to support machining deep parts. The use of helical teeth means that there is no chattering even with large protrusion.
Standard Price: SGD 149.29- Days to Ship: 4 Day(s) or more -
UNION TOOL
[Features]
· Carbide spiral chamfering cutter
· Half Taper Angle of 45°
· The external blade is a torsion type that limits the occurrence of burrs when compared with the straight blade type.Standard Price: SGD 97.25- Days to Ship: 5 Day(s) or more -
Chatterless chamfer milling machine
FUKUDA
6-flute blade improves cutting force, fantastic sharpness means zero chatter, horizontal motion during face milling is possible, and the uncomfortable metallic sound during machining is drastically reduced.
[Features]
· Chamfering.
· Drilling machines, milling machines, machining centers.
· Horizontal MillingStandard Price: SGD 34.20- Days to Ship: 4 Day(s) or more -
CS2S Type II Chamfering Cutter (Single Flute), Straight Shank
OKAZAKI SEIKO
1-flute type. For steel and stainless steel. All products are TiN coated.
Standard Price: SGD 519.20 Days to Ship: 4 Day(s) or more -
TAIYO-TOOL
[Applications]
· Hole chamfer
[Single Blade / Double Blade]
· Single blade
[Tool Grade]
· High-speed steel
[Coating Y/N] N
[Coating Type] Non-Coated
[Flute No.] 1-FluteStandard Price: SGD 144.47- Days to Ship: 7 Day(s) or more -
CoroMill Plura - General Purpose Chamfering End Mill, Cylindrical Shank / Weldon Shank
SANDVIK
High performance end mill with high versatility
[Features]
·One end mill for all work materials
·Improved machine operating rate
·Minimize tool inventory
·Safe and predictable tool life
·High flexibility and optimized toolingStandard Price: SGD 123.90- Days to Ship: 8 Day(s) or more -
Carbide 2-Flute Chamfering V-Grooving End Mill 90° E107X
7 LEADERS
[Features]
· 90° Carbide 2-Flute Chamfering V-Grooving End Mill
· Use for V-grooving, horizontal chamfering, centering, hole chamfering.
· Nanoparticle Multilayer Coating
· Excellent lubricity and abrasion resistance.
· Suitable for a wide range of work materials from general steel to aluminum.Days to Ship: 3 Day(s) or more -
Back Seat Mini Chamfer (90° Blade)
NOGA JAPAN
[Features]
·A solid carbide chamfering cutter that can chamfer the back of small holes (minimum cutting edge diameter 1.5 mm).
·Perfect for machining.
·Can be used for milling, deburring, and back chamfering.
·The spiral blade provides a smooth cutting edge.
·This is a mini chamfer that can be chamfered and deburred by milling both the front and back of drilled holes.
[Applications]
·Work Material: Carbon steel, stainless steel, cast steel, aluminum, plastic, nickel alloy, titanium alloy, etc.
·A mini chamfer that can be chamfered and deburred by milling both the front and back of drilled holes.Standard Price: SGD 89.10- Days to Ship: 3 Day(s) or more -
Long Reach Back Spot Facing Mini Chamfer 90° Blade (for deep holes)
NOGA JAPAN
[Features]
· A solid carbide chamfering cutter which can chamfer small diameter hole backs (minimum blade diameter: 3.0 mm).
· Ideal for machining.
· Spiral blade provides smooth sharpness.
· A mini chamfer that can chamfer/deburr by milling either the back or front of the drill hole.
[Applications]
· Work materials: Carbon steel, stainless steel, cast steel, aluminum, plastic, nickel alloy, titanium alloy, etc.
· A mini chamfer that can chamfer and deburr by milling either the back or front of the drill hole.Standard Price: SGD 89.10- Days to Ship: 4 Day(s) or more -
High Speed Chamfering Tool TOGLON® Multi Chamfer
IWATA TOOL
[Features]
· Toglon-shaped 5-flute chamfering dedicated model
· Ultra-high speed machining with suppressed burrs is possible for light chamfering
[Applications]
· Work materials: Mild steel, carbon steel, alloy steel, tempered steel, stainless steel, titanium alloyStandard Price: SGD 64.50- Days to Ship: 4 Day(s) or more -
STAR-M
[Features]
· Dedicated cutter for veneer tape.
· Cuts off protruding veneer tape.
· Curved or straight cutting is possible with a round blade.
· The blade can be used over 360 degrees.
[Applications]
· For Furniture and FittingsStandard Price: SGD 64.80 Days to Ship: 8 Day(s) -
WXL-Coated Chamfering Cutter Negative Type Regular W-HSCT-N
OSG
[Features]
· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
Significantly reduces turning-back, or burring.
Excellent chip discharge.Standard Price: SGD 135.16- Days to Ship: 4 Day(s) or more -
WXL-Coated Chamfering Cutter Positive Type Regular W-HSCT-P
OSG
[Features]
· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
Significantly reduces turning-back, or burring.
Excellent chip discharge.Standard Price: SGD 135.16- Days to Ship: 3 Day(s) or more -
MUGEN Coating C Chamfer Cutter NSCV-M
NS TOOL
[Features]
· Enables easy C chamfering.
· Uses MUGEN coating that dramatically improves the durability.Standard Price: SGD 108.16- Days to Ship: 11 Day(s) -
V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 90°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
· Standard type.Standard Price: SGD 113.36- Days to Ship: 5 Day(s) or more -
Chamfering Cutter, Carbide, Uramen-Maru (Standard Type) C-BMC-V
THE CUT
[Features]
· No need to turn over the work material. (Also removes through-hole burrs)
· Both sides can be chamfered with the one cutter tool.
· Ultra-fine particle carbide with TiAlN coating for a longer tool life.Standard Price: SGD 218.96- Days to Ship: 8 Day(s) or more -
Double Sided Chamfering Cutter 45° DFC
THE CUT
[Features]
· Capable of V-grooving both front and back surfaces as well as the side surfaces.
· Capable of chamfering up to C2.8 for front chamfering.
· The use of a dedicated insert (4 cutting edges) delivers high precision machining.Standard Price: SGD 296.86- Days to Ship: 9 Day(s) or more -
6.3 to 20.5 mm Counter Sink (3-Flute, 6 Pcs. Set, HSS)
ESCO
[Features]
·"Set contents": 6 pcs. set
·Size (Cutting diameter × shank diameter): 6.3 × 5, 8.3 × 6, 10.4 × 6, 12.4 × 8, 16.5 × 10, 20.5 × 10 mm, 1 for each size
·Materials: HSS (high-speed steel)
·Tip angle: 90°
·Number of Grooves: 3
·Counter sink (countersunk) suitable for deburring metal.Standard Price: SGD 267.68 Days to Ship: 10 Day(s) or more -
TS coated carbide chamfering end mill, 2-flute / 15° spiral
MISUMI
[Features]
·With the flute tip hard to chip and shape that facilitates cutting chip discharge, processing from positioning ( = centering) to chamfering is possible with a single tool
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
Standard Price: SGD 110.31- Days to Ship: 3 Day(s) or more -
TS coated carbide chamfering end mill, 2-flute / short model
MISUMI
[Features]
·Ideal for chamfering. Can also be used as a deburring tool
·Since it has peripheral flutes, it is possible to perform inclined, contour, and helical cutting
·Since the peripheral flutes have helix angle, it is possible to process as shown in the above figure
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- S (Short)
Standard Price: SGD 65.19- Days to Ship: 3 Day(s) or more -
TS coated carbide inner R-cutter, 2-flute
MISUMI
[Features]
·Easy high-quality processing of corner radius
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties- Volume Discount
- TS
- General Steel
- 2 Flutes
Standard Price: SGD 60.92- Days to Ship: 3 Day(s) or more -
Carbide inner R-cutter, 2-flute
MISUMI
Achieves the easy and high-quality processing of the corner R with the extensive 20 sizes
- Volume Discount
- Non-Coated
- General Steel
- 2 Flutes
Standard Price: SGD 74.19- Days to Ship: 3 Day(s) or more -
Carbide Chamfering End Mill for Aluminum Machining, 2-Flute, 30° Spiral
MISUMI
Capable of everything from positioning to chamfering in a single shot
- Volume Discount
- Non-Coated
- Aluminum
- 2 Flutes
Standard Price: SGD 83.70- Days to Ship: 3 Day(s) or more -
Carbide Chamfering End Mill for Aluminum Machining, 2-Flute
MISUMI
The sharp helix blade achieves the clean machined surface with less burr
- Volume Discount
- Non-Coated
- Aluminum
- 2 Flutes
Standard Price: SGD 82.18- Days to Ship: 3 Day(s) or more -
TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short
MISUMI
The chamfer angle can be selected from 60, 90 and 120°according to the machining style
- Volume Discount
- TiCN
- 2 Flutes
- S (Short)
Standard Price: SGD 69.14- Days to Ship: 3 Day(s) or more -
XCP Series Carbide Inner Radius Cutter for High Hardness Steel Machining / 4-Flute / Short Type
MISUMI
XCP Series Carbide Inner Radius Cutter for High Hardness Steel Machining / 4-Flute / Short Type
- Volume Discount
Standard Price: SGD 80.45- Days to Ship: 3 Day(s) or more -
XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle
MISUMI
XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle
- Volume Discount
Standard Price: SGD 92.93- Days to Ship: 3 Day(s) or more -
XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type
MISUMI
XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type
- Volume Discount
Standard Price: SGD 76.08- Days to Ship: 3 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Tool Material Type |
| Tool Diameter (D)(mm) |
| Tip angle (θ) |
| Application |
| work material |
| Single blade, two blades |
| Peripheral Blade Y/N |
| Coating Y/N |
| Coating Type |
| R Size (R)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | KYOWA SEIKO | MISUMI | DAIICHITOOL | MISUMI | NT TOOL | NS TOOL | OSG | OSG | DIXI | FUKUDA | EIKOSHA | NT TOOL | TAIYO-TOOL | MISUMI | MISUMI | MISUMI | OSG | UNION TOOL | FUKUDA | OKAZAKI SEIKO | TAIYO-TOOL | SANDVIK | 7 LEADERS | NOGA JAPAN | NOGA JAPAN | IWATA TOOL | STAR-M | OSG | OSG | NS TOOL | MAKOTOLOY | THE CUT | THE CUT | ESCO | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product Series | TS coated carbide chamfering end mill, 3-flute / short model | TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model | CS2S Type II Chamfering Cutter (Single Flute), Straight Shank | CoroMill Plura - General Purpose Chamfering End Mill, Cylindrical Shank / Weldon Shank | Long Reach Back Spot Facing Mini Chamfer 90° Blade (for deep holes) | V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 90° | Chamfering Cutter, Carbide, Uramen-Maru (Standard Type) C-BMC-V | TS coated carbide chamfering end mill, 2-flute / short model | Carbide Chamfering End Mill for Aluminum Machining, 2-Flute, 30° Spiral | TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short | XCP Series Carbide Inner Radius Cutter for High Hardness Steel Machining / 4-Flute / Short Type | XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle | XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type | ||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||||||||||||||||||
| Days to Ship | Same day or more | 4 Day(s) or more | 3 Day(s) or more | 6 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 11 Day(s) | 3 Day(s) or more | 3 Day(s) or more | 11 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 6 Day(s) or more | 3 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 8 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 8 Day(s) | 4 Day(s) or more | 3 Day(s) or more | 11 Day(s) | 5 Day(s) or more | 8 Day(s) or more | 9 Day(s) or more | 10 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more |
| Specifications |
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||
| Tool Material Type | High-speed steel | Carbide | Carbide | Cobalt HSS | Carbide | Cobalt HSS | Carbide | Powder high-speed steel | High-speed steel | Carbide | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Carbide | Cobalt HSS | Carbide | Carbide | Carbide | Cobalt HSS | Cobalt HSS | High-speed steel | Carbide | Carbide | - | - | - | - | Carbide | Carbide | Carbide | Carbide | Carbide | - | - | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Powder high-speed steel | Carbide | Carbide | Carbide |
| Tool Diameter (D)(mm) | 3 ～ 25 | 0.3 ～ 4 | 3 ～ 16 | 8 ～ 46 | 3 ～ 12 | - | 4 ～ 6 | 3 ～ 25 | 3 ～ 25 | 2 ～ 12 | - | 6 | 10 ～ 30 | 2.6 ～ 23 | 3 ～ 12 | 10 ～ 25 | 3 ～ 16 | 0.8 ～ 1 | 0.8 ～ 1 | - | 66 | 10 ～ 20 | 6 ～ 12 | 0.5 ～ 20 | 1.5 ～ 6 | 3 ～ 12 | - | - | - | - | 4 ～ 6 | 1 ～ 20 | 2.8 ～ 12 | 11 ～ 20 | - | 3 ～ 12 | 3 ～ 12 | - | - | 3 ～ 12 | 3 ～ 12 | 10 ～ 25 | - | 3 ～ 10 | 3 ～ 12 |
| Tip angle (θ) | 60 ～ 120 | 90° | 60 ～ 120 | 60° ～ 90° | 90 | 90 | 45° | 90 | 90 ～ 130 | 90 | - | 60 | 90 | - | 90 | 60 ～ 160 | 60 ～ 120 | 90 | 90 | 60 ～ 120 | 90 | 60 ～ 90 | 90° | 90 | 90 | 90 | 90 | - | 90° | - | 45° | 90 | 90° | - | - | 90 | 60 ～ 120 | - | - | 90 | 90 | 60 ～ 120 | - | 90 | 90 |
| Application | Centering (Positioning) / Hole Chamfer | Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Hole Chamfer | Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Round Chamfer | Chamfering/Horizontal | Hole Chamfer | Round Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Hole Chamfer / Chamfering/Horizontal / Round Chamfer | Hole Chamfer / Chamfering/Horizontal | Hole Chamfer | Hole Chamfer | Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | - | - | - | - | Chamfering/Horizontal | - | Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Hole Chamfer / Drilling / Other | Hole Chamfer / V Groove | - | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Round Chamfer | Round Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Round Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove |
| work material | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / high hardness steel[○] / Cast Iron[○] | Aluminum[◎] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎] | general steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[○] / Resin[○] | general steel[○] / Cast Iron[○] / Resin[○] | general steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○] | Aluminum[○] / Copper[○] | - | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Quenched and tempered steel[◎] / high hardness steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] / Graphite[○] / Resin[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | - | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | - | - | - | - | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] | general steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] | general steel[○] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | general steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | - | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] |
| Single blade, two blades | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade / Double-edged | Single blade | Single blade | Single blade | - | Single blade | - | Single blade / Double-edged | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | - | - | - | - | - | Single blade | - | Single blade | Single blade | Single blade | - | - | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade |
| Peripheral Blade Y/N | NA | - | NA | Available | Available | NA | Available | NA | NA | - | NA | - | NA | - | Available | Available | NA | NA | NA | NA | NA | - | NA | - | - | - | - | - | NA | - | Available | - | - | - | - | NA | Available | NA | NA | NA | NA | Available | NA | NA | Available |
| Coating Y/N | Available | NA | Available | - | Available | NA | NA | Available | NA | Available | NA | - | NA | NA | Available | Available / NA | Available | Available | NA | NA | Available | NA | Available | Available | - | - | - | - | Available | Available | Available | NA | Available | - | - | Available | Available | Available | NA | NA | NA | Available | Available | Available | Available |
| Coating Type | TiN | - | TS | - | TS | - | - | TiCN | Non-Coated | TiAlN | Non-Coated | - | - | Non-Coated | TS | TiCN | AlCrN | TiAlN | - | Non-Coated | TiN | Non-Coated | Other | Other | TiAlN | TiAlN | Non-Coated / ALT | - | - | Other | TiAlN | - | TiAlN | - | - | TS | TS | TS | - | - | - | - | AlCrN | AlCrN | AlCrN |
| R Size (R)(mm) | - | - | - | - | - | - | - | - | - | - | 0.5 ～ 30 | - | - | 0.3 ～ 10 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.1 ～ 5 | 0.15 ～ 5 | - | - | - | 0.5 ～ 3 | - | - |
Loading...
Configure
Specification/Dimensions
-
Tool Material Type
-
Tool Diameter (D)(mm)
- 0 to 2
- 0.1
- 0.2
- 0.3
- 0.3, 0.6
- 0.4
- 0.5
- 0.5, 1
- 0.6
- 0.7
- 0.8
- 0.9
- 1
- 1, 2
- 1.2
- 1.5
- 1.6
- 1.8
- 2
- 2.4
- 2.5
- 2.6
- 2.8
- 3
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.8
- 4
- 4.2
- 4.4
- 4.5
- 4.6
- 4.8
- 5
- 5.2
- 5.4
- 5.5
- 5.6
- 5.8
- 6
- 6.2
- 6.4
- 6.5
- 6.6
- 6.8
- 7
- 7.2
- 7.4
- 7.5
- 7.6
- 7.8
- 8
- 8.2
- 8.4
- 8.5
- 8.8
- 9.4
- 10
- 10.2
- 10.4
- 10.8
- 11
- 11.4
- 12
- 12.4
- 13
- 13.4
- 14
- 14.4
- 15
- 15.4
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 25
- 26
- 30
- 31
- 32
- 35
- 36
- 40
- 45
- 46
- 50
- 55
- 60
- 65
- 66
- 70
- 75
- 80
- 90
- 100
-
Tip angle (θ)
-
Application
-
work material
-
Single blade, two blades
-
Peripheral Blade Y/N
-
Coating Y/N
-
Coating Type
-
R Size (R)(mm)
- 0.1
- 0.15
- 0.2
- 0.25
- 0.3
- 0.35
- 0.4
- 0.5
- 0.55
- 0.6
- 0.7
- 0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1, 1.5
- 1.1
- 1.2
- 1.25
- 1.3
- 1.4
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
- 2
- 2, 3
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.75
- 2.8
- 2.9
- 3
- 3.25
- 3.5
- 3.75
- 4
- 4.25
- 4.5
- 4.75
- 5
- 5.25
- 5.5
- 5.75
- 6
- 6.25
- 6.5
- 6.75
- 7
- 7.25
- 7.5
- 7.75
- 8
- 8.5
- 9
- 9.5
- 10
- 10.5
- 11
- 11.5
- 12
- 12.5
- 13
- 13.5
- 14
- 14.5
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 20.5
- 21
- 21.5
- 22
- 22.5
- 23
- 23.5
- 24
- 24.5
- 25
- 25.5
- 26
- 26.5
- 27
- 27.5
- 28
- 28.5
- 29
- 29.5
- 30
Narrow search by specifying Manufacturer
-
- MAKOTOLOY (22)
- OSG (21)
- NOGA JAPAN (13)
- IWATA TOOL (11)
- EIKOSHA (6)
- FUKUDA (5)
- OKAZAKI SEIKO (4)
- DIJET (3)
- GUHRING (3)
- KYOWA SEIKO (3)
- SANKO MFG (3)
- STAR-M (3)
- THE CUT (3)
- TAIYO-TOOL (3)
- ASAHI TOOLS (2)
- DAIICHITOOL (2)
- NS TOOL (2)
- NT TOOL (2)
- SANDVIK (2)
- 7 LEADERS (1)
- BIG DAISHOWA SEIKI (1)
- DIXI (1)
- ESCO (1)
- FUJIGEN (1)
- MAPAL (1)
- Poulten&Graf (1)
- UNION TOOL (1)
CAD
-
- 2D
- 3D
Related Categories to Chamfer, V-Grooves
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?