Vehicle Maintenance Tools（Page5）

• 

  Snap Ring Pliers AS403B

  KTC(KYOTO TOOL)

  [Applications]
  · Use these pliers to remove (attach) snap rings that do not have a hooking hole.
  [Scope]
  
  · Normal type of snap ring with no hooking holes.
  · Thin claw tip is compatible even with rings having a narrow opening.
  
  · This tool is dedicated for snap rings that have a narrow opening and angled notches and are used in Honda vehicles
  · Claws are replaceable in the event of wear or damage.
  [Features]
  
  · Stepped tip shape increases stability when removing or attaching snap rings that were difficult to handle before.
  · Work from either above or from the side of the shaft.
  
  · Remove or attach Honda vehicle snap rings, which were difficult to handle before.

  Standard Price:	SGD 51.90
  Days to Ship:	9 Day(s)

• 

  Claw For AS403B

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Snap Ring Pliers AS403B.

  Standard Price:	SGD 51.60
  Days to Ship:	8 Day(s)

• 

  Drive Shaft Remover For Slide Hammer Puller

  KTC(KYOTO TOOL)

  [Applications]
  · Removing the drive shaft from transaxles in FF vehicles.
  · This dedicated tool is used with slide hammer pullers (AUD3).

  Standard Price:	SGD 145.09
  Days to Ship:	8 Day(s)

• 

  Boot Band Tool With Cutter

  KTC(KYOTO TOOL)

  [Applications]
  · Tightening and cutting joint boot fixing bands for drive shafts.
  [Scope]
  · Outstanding boot bands used in mini cars to passenger cars. (Applicable for all sizes)
  [Features]
  · Ratchet mechanism enables efficient winding.
  · Bending to cutting boot bands performed in one action.

  Standard Price:	SGD 120.98
  Days to Ship:	8 Day(s)

• 

  Boot Band Tool

  KTC(KYOTO TOOL)

  [Applications]
  · Dedicated tool for clamp type boot bands on drive shafts used in automobiles.
  [Scope]
  · Compatible with mini to passenger cars equipped with clamp type boot bands. (Compatible with import vehicles)
  [Features]
  · Clamp the boot band easily just by screwing in the center bolt.
  · Compatible with ratchet handle, etc., for quick operations using light force. (Hexagon width across flats 14 mm)
  · Center bolt is flanged so the wrench does not deviate even when using offset wrench.
  · Handle grip is made of non-slip plastic.
  · Clamping section adopted a claw shape that does not rise up.

  Standard Price:	SGD 226.10
  Days to Ship:	8 Day(s)

• 

  Housing Nut Wrench (For Hexagon / Octagon Nut)

  KTC(KYOTO TOOL)

  [Applications]
  · Tightening and loosening rear housing nuts of large vehicles.
  [Scope]
  · Rear housing nuts used in large vehicles (4 t and larger).
  Hexagon: Width across flats 85 mm to 130 mm
  Octagon: Width across flats 90 mm to 125 mm
  [Features]
  · Special claw shape supports both hexagon and octagon bolts.
  · Special claw shape securely holds the sides of the nut.
  · Just turn the hexagon knob with an offset wrench or drive tool with a 17 mm width across flats.

  Standard Price:	SGD 665.35
  Days to Ship:	8 Day(s)

• 

  Housing Nut Wrench (For Round Nut)

  KTC(KYOTO TOOL)

  [Applications]
  · Tightening and loosening rear housing nuts.
  [Scope]
  · Rear housing nuts used with compact vehicles (2 t class).
  [Features]
  · Compatible with a variety of models just by sliding the pin to the appropriate pitch.
  · Scale display is on the wrench body, simplifying centering work.

  Standard Price:	SGD 116.79
  Days to Ship:	8 Day(s)

• 

  Pin A (For Pin Hole Diameter ø6.8 To 9)

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Housing Nut Wrench AS352.

  Standard Price:	SGD 37.24
  Days to Ship:	8 Day(s)

• 

  Pin B (For Pin Hole Diameter ø9.1 To 10)

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Housing Nut Wrench AS352.

  Standard Price:	SGD 37.24
  Days to Ship:	8 Day(s)

• 

  Rear Hub Puller For Large Vehicle

  KTC(KYOTO TOOL)

  [Applications]
  · Removing rear wheel hubs on large vehicles.
  [Scope]
  · Rear wheel hubs on large vehicles (4 t or larger) that meet the following conditions.
  　· 8 or 10 holes (number of axle shaft mounting bolts)
  · P.C.D 140 mm to 188 mm
  · Axle shaft mounting bolt size M12 to M16
  [Features]
  · Vehicle's axle shaft mounting bolts are used so that aluminum wheels, etc., will not be damaged.
  · Just tighten with an offset wrench or socket (27 mm width across flats) and a drive tool.

  Standard Price:	SGD 483.29
  Days to Ship:	9 Day(s)

• 

  Rear Hub Puller For Large Vehicle Center Bolt

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Rear Hub Puller for Large Vehicle AS353.

  Standard Price:	SGD 78.54
  Days to Ship:	8 Day(s)

• 

  Rear Hub Puller For Large Vehicles, Spacer

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Rear Hub Puller for Large Vehicle AS353.

  Standard Price:	SGD 84.41
  Days to Ship:	8 Day(s)

• 

  Front Hub Puller For Large Vehicle

  KTC(KYOTO TOOL)

  [Applications]
  · Removing front wheel hubs on large vehicles.
  [Scope]
  · Front wheel hubs on large vehicles (4 t or larger) that meet the following conditions.
  　· 6, 8 or 10-hole (6 or 8 holes: JIS method, 10 holes: ISO method) wheel
  · P.C.D 222.25 mm to 335 mm
  · Hub bolt size M20 × 1.5, M22 × 1.5, M24 × 1.5
  [Features]
  · Puller is attached to hub bolt for removal so that aluminum wheels, etc., will not be damaged.
  · L and R stamped on arm body for quick identification of left and right.
  · Hub bolt sizes are M20, M22 and M24. Can identify bolt sizes by the number of lines. (M20: 1 line, M22: 2 lines, M24: 3 lines)

  Standard Price:	SGD 862.14
  Days to Ship:	8 Day(s)

• 

  Front Hub Puller For Large Vehicle Center Bolt

  KTC(KYOTO TOOL)

  It is a spare part for the front hub puller AS354 for large vehicles.

  Standard Price:	SGD 91.12
  Days to Ship:	8 Day(s)

• 

  Front Hub Puller Arm For Large Vehicle

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Front Hub Puller for Large Vehicle AS354. (Includes 2 pcs)

  Standard Price:	SGD 159.76-
  Days to Ship:	8 Day(s)

• 

  Air Grease Feeder Locking Type Upper Cone

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Air Grease Feeder AVG35.

  Standard Price:	SGD 276.90
  Days to Ship:	8 Day(s)

• 

  Air Grease Feeder Nozzle (4 Pc Set)

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Air Grease Feeder AVG35.

  Standard Price:	SGD 69.73
  Days to Ship:	9 Day(s)

• 

  Strut Spring Compressor Standard Arm (Outer Diameter 90 To 170)

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Strut Spring Compressor AS10.

  Standard Price:	SGD 673.07
  Days to Ship:	8 Day(s)

• 

  Strut Spring Compressor Large Arm (Outer Diameter 135 to 220)

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Strut Spring Compressor AS10.

  Standard Price:	SGD 886.30
  Days to Ship:	8 Day(s)

• 

  12.7 Sq. Impact Wrench Socket For Aluminum Wheel Ornamental Nut

  KTC(KYOTO TOOL)

  [Features]
  · Use this wrench to tighten and loosen ornamental nuts on aluminum wheels. Thin type with minimum outer diameter, having a rubber cushion to protect ornamental nuts from damage.

  Standard Price:	SGD 41.55-
  Days to Ship:	8 Day(s) or more

• 

  Wheel Cap Wrench

  KTC(KYOTO TOOL)

  [Applications]
  · Removing wheel caps for automobiles.
  [Features]
  · Thin shape is easy to insert between wheel rim and wheel cap and does not cause scratches.
  · With angle for making work easy.
  · Uses plastic grip which fits hand.

  Standard Price:	SGD 43.84
  Days to Ship:	8 Day(s)

• 

  Aluminum Wheel Center Cap Wrench

  KTC(KYOTO TOOL)

  [Features]
  ·The tip part is low profile, compact, scratch resistant, and easy to insert into the notch
  ·With 2 levels of angle for easy work
  ·Adoption of a resin grip that fits in your hand
  [Applications]
  ·Removal of aluminum wheel center cap for automobiles

  Standard Price:	SGD 24.23
  Days to Ship:	8 Day(s)

• 

  12.7 Sq. Impact Wrench Socket Set For Aluminum Wheel Ornamental Nuts

  KTC(KYOTO TOOL)

  [Features]
  · Use this wrench to tighten and loosen ornamental nuts on aluminum wheels. Thin type with minimum outer diameter, having a rubber cushion to protect ornamental nuts from damage.

  Standard Price:	SGD 119.93
  Days to Ship:	9 Day(s)

• 

  12.7 Sq. Impact Wrench Socket For Wheel Nut (Long And Thin)

  KTC(KYOTO TOOL)

  [Features]
  · Rubber cushion protects plated nuts and ornamental nuts.
  · [Applications]
  · A dedicated socket wrench for tightening and loosening automobile wheel nuts. Compatible with impact wrenches.

  Standard Price:	SGD 32.36-
  Days to Ship:	8 Day(s) or more

• 

  19.0 Sq. Inner Socket For Impact Wrench

  KTC(KYOTO TOOL)

  Standard Price:	SGD 51.61-
  Days to Ship:	8 Day(s)

• 

  25.4 Sq. Inner Socket For Impact Wrench

  KTC(KYOTO TOOL)

  Standard Price:	SGD 58.21-
  Days to Ship:	8 Day(s)

• 

  12.7 Sq. Torque Wrench Dedicated For Wheel Nut

  KTC(KYOTO TOOL)

  [Applications]
  · Single-purpose torque wrench dedicated for automobile wheel nuts.
  · Compatible only with right rotation tightening. (Incompatible with reverse threads.)
  [Scope]
  · WCMPA085: Specified torque 85 N·m (Suzuki, Nissan mini cars)
  · WCMPA103: Specified torque 103 N·m (Toyota, Daihatsu)
  · WCMPA108: Specified torque 108 N·m (Nissan, Honda)
  [Features]
  · Manage torques with high accuracy by using settings dedicated for manufacturer-specified torques.
  · Total length is set at the optimum 420 mm to prevent tire and hand interference.
  · Judge the setting torque by the color of neck covers.
  · Adopted a ratchet head (36-tooth gear) to shorten work time.

  Standard Price:	SGD 240.90-
  Days to Ship:	8 Day(s) or more

• 

  Brake Tool Set (For Drum Brakes) [12 Items]

  KTC(KYOTO TOOL)

  [Applications]
  · Dedicated tool set for disassembly, assembly and adjustment of automotive drum brakes.
  [Scope]
  · Drum brake systems in mini cars to compact trucks (up to 2 t class).

  Standard Price:	SGD 285.79
  Days to Ship:	8 Day(s)

• 

  Brake Tool Set (For Disc Brakes) [6 Items]

  KTC(KYOTO TOOL)

  [Applications]
  · Dedicated tool set for disassembly, assembly and adjustment of automotive disc brakes.
  [Scope]
  · Disc brake systems in mini cars to compact trucks (up to 2 t class).

  Standard Price:	SGD 328.82
  Days to Ship:	8 Day(s)

• 

  Brake Drum Screwdriver

  KTC(KYOTO TOOL)

  [Applications]
  · Removing and attaching brake drum screws and door hinge bolts, etc.
  [Features]
  · T-shaped handle with thick non-slip grip is easy to apply force with.
  · Can also be used to remove and attach door hinge bolts, etc.

  Standard Price:	SGD 37.10
  Days to Ship:	8 Day(s)

• 

  Tension Spring Tool

  KTC(KYOTO TOOL)

  [Features]
  Has a curved shaft so that springs move smoothly.
  Grip is designed for a good fit, making assembly easier.

  Standard Price:	SGD 30.02
  Days to Ship:	8 Day(s)

• 

  T-Shaped Drum Remover

  KTC(KYOTO TOOL)

  [Scope]
  · Removal of brake drums mainly for mini cars.
  [Features]
  · The sliding handle allows brake drums to be removed easily without the handles interfering when using 2 removers.
  · Replaceable end screw section allows worn screw to be restored just by replacing the end screw.

  Standard Price:	SGD 37.14
  Days to Ship:	8 Day(s)

• 

  T-Shaped Drum Remover Bit

  KTC(KYOTO TOOL)

  [Features]
  · Service part for T-Shaped Drum Remover ABX9-06.

  Standard Price:	SGD 8.30
  Days to Ship:	8 Day(s)

• 

  Hub Cap Pliers HP-350S

  KTC(KYOTO TOOL)

  [Applications]
  · Removing hub caps.
  [Features]
  · Non-scratch pliers that can be operated with a single touch.
  · Shaped to effortlessly lift up cap.
  · Free size is compatible with a variety of automobile models.

  Standard Price:	SGD 133.70
  Days to Ship:	9 Day(s)

• 

  Hubcap Pliers, HP-45130

  KTC(KYOTO TOOL)

  [Features]
  ·Since the claws bite into parallel, the hub cap is not easily damaged and can be easily removed
  ·Since the blade width can be adjusted in 6 steps, it can be applied to compact to medium-sized trucks
  [Applications]
  ·Hubcap removal

  Standard Price:	SGD 200.80
  Days to Ship:	8 Day(s)

• 

  Duo Serve Type Spring Tool

  KTC(KYOTO TOOL)

  [Applications]
  · Use together with brake spring pliers to remove and assemble brake shoe return springs in most models.

  Standard Price:	SGD 62.19
  Days to Ship:	8 Day(s)

• 

  C Type Washer Tool

  KTC(KYOTO TOOL)

  [Applications]
  · Removing and attaching C type washers.
  [Features]
  · Dedicated claw for improved workability.
  · Speedily remove the C-washer by spreading it with the claw cleats and pushing it out from the flat side.

  Standard Price:	SGD 72.78
  Days to Ship:	8 Day(s)

• 

  Parking Shoe Lever Tool

  KTC(KYOTO TOOL)

  Connect and disconnect parking cables with a single touch.
  [Applications]
  · Connecting and disconnecting parking cables.
  [Features]
  · Dedicated claws have been adopted, ensuring that parking brake cables are not dislodged easily.

  Standard Price:	SGD 46.58
  Days to Ship:	8 Day(s)

• 

  Shoe Holding Spring Tool ABX-33

  KTC(KYOTO TOOL)

  [Applications]
  Removing and mounting shoes holding springs for passenger car drum brakes.
  Easy-to-grip shape is suitable for pushing and turning pins.

  Standard Price:	SGD 27.08
  Days to Ship:	8 Day(s)

• 

  Shoe Holding Spring Tool ABX-34

  KTC(KYOTO TOOL)

  [Applications]
  Removing and mounting shoes holding springs for passenger car drum brakes.
  The tapered cup holder secures the cup, enabling speedy work.

  Standard Price:	SGD 59.88
  Days to Ship:	8 Day(s)

• 

  Brake Spring Pliers

  KTC(KYOTO TOOL)

  [Applications]
  · Removing and assembling tension springs for 4 to 10 t large vehicles.

  Standard Price:	SGD 204.10
  Days to Ship:	8 Day(s)

• 

  Brake Spring Pliers Claw (With Pin)

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Brake Spring Pliers ASP-550.

  Standard Price:	SGD 44.20
  Days to Ship:	8 Day(s)

• 

  Disc Brake Piston Tool (For Single Piston)

  KTC(KYOTO TOOL)

  [Applications]
  · Compressing disc brake pistons (single piston type).
  [Features]
  · Can be used so that plate contacts the entire surface regardless of whether the arm is high or low.
  · Center screw has a ball, making it rotate smoothly.
  [Scope]
  · Compatible with single piston calipers for mini cars to small trucks (2 t class). (Not suitable for use with parking brake integrated brake calipers.)

  Standard Price:	SGD 111.55
  Days to Ship:	8 Day(s)

• 

  Disc Brake Piston Tool ABX10

  KTC(KYOTO TOOL)

  [Applications]
  · Compressing disc brake pistons (single piston / 2-piston type).
  [Features]
  · Use plates A and B accordingly for use with various models.
  [Scope]
  · Compatible with single piston calipers, parallel piston calipers and opposed 2-piston calipers for mini cars to small trucks (2 t class). (Not suitable for use with parking brake integrated brake calipers.)

  Standard Price:	SGD 158.71
  Days to Ship:	8 Day(s)

• 

  Brake Piston Resetter

  KTC(KYOTO TOOL)

  [Applications]
  · Dedicated tool for pressing back piston (single piston type) for brake calipers when replacing disc brake pads or during overhaul.
  [Features]
  · Just grip the lever to return the brake piston.
  · Rotating handle allows work to be performed from various postures.
  · Easily remove from calipers with one hand.
  · Parallel movement pushes the piston straight back without scratching it.
  [Scope]
  · Single piston brakes for mini cars to medium sized vehicles (2 t class). (Not suitable for use with parking brake integrated brake calipers.)

  Standard Price:	SGD 133.56
  Days to Ship:	8 Day(s)

Loading...