Diamond Cutters

• 

  Chip Welding U Cutter

  SANKYO DIAMOND INDUSTRIAL

  Repairing cracks in concrete, mortar, etc. Lower grooving for caulking injection. Processing speed is 1.5 times faster than conventional welding method!! The groove shape does not collapse until the end!! The cut end is clean because of the low vibration!!

  Standard Price:	SGD 108.82
  Days to Ship:	8 Day(s)

• 

  Diamond Cutter Electrocoated Type

  RIKENDIAMOND

  Diamond cutter that can be used on natural marble, FRP, hard resin, artificial marble, ceramic siding.

  Standard Price:	SGD 58.44
  Days to Ship:	7 Day(s) or more

• 

  Diamond Wheel Rim Type (Dry Type / Wet Type)

  LOBTEX

  [Features]
  · For cutting tiles, roofing tiles, concrete, blocks, thin steel plates (0.5 mm or less) etc.
  · R (integrated type)

  Standard Price:	SGD 69.30-
  Days to Ship:	8 Day(s) or more

• 

  Diamond Portable Cutter Blue (Straight)

  ASAHI DIAMOND

  A standard type with excellent balance of sharpness and tool life

  Standard Price:	SGD 136.20-
  Days to Ship:	10 Day(s) or more

• 

  Small Cutter

  SANKYO DIAMOND INDUSTRIAL

  For cutting tiles.
  
  [Features]
  · Flat blade edge for cutting section focus.
  · Also ideal for wet tile cutting.
  · Rim type for clean finishing of cut sections.

  Standard Price:	SGD 59.20-
  Days to Ship:	8 Day(s) or more

• 

  SD Half

  SANKYO DIAMOND INDUSTRIAL

  Grinding concrete, bricks, blocks, and stone materials. The life of the cutting edge was greatly extended by integral molding of the tip. High efficiency grinding with the wide diamond layer

  Standard Price:	SGD 172.77
  Days to Ship:	10 Day(s)

• 

  PVC Cut Ace (Screwing)

  SANKYO DIAMOND INDUSTRIAL

  Cutting PVC pipes. PVC pipe cutting + With a screw flange for which direct mounting to Disk grinder is possible

  Standard Price:	SGD 64.27
  Days to Ship:	8 Day(s)

• 

  Diamond Cutter Wheel (Dry Type) Single Cup

  LOBTEX

  Diamond cup wheel has a high density of diamond abrasive grains and demonstrates excellent workability during chamfering, such as grinding concrete blocks, bricks, tiles, stones, and refractory furnace materials for various construction work.

  Standard Price:	SGD 113.19-
  Days to Ship:	8 Day(s)

• 

  Diamond Wheel New Laser (Dry Type)

  LOBTEX

  [Features]
  · Further increases the performance of conventional products and pursues a high cost performance.
  · SL255A and above use a noise reduction baseplate.
  · Further pursues cutting quality + long life and safety.
  [Applications]
  · For cutting hard concrete and secondary concrete products, stone materials, ALC, mortar, bricks, etc.

  Standard Price:	SGD 578.60
  Days to Ship:	8 Day(s)

• 

  Noritake Diamond Cutter Hatsuri Fitto 178 × 2.2 × 25.4

  NORITAKE

  [Features]
  · For shaving/chipping work.
  · The ideal cutter for shaving/chipping work requiring a high level of sharpness.
  · The segmented form with narrow slits allows for smooth cutting with low levels of vibration.
  [Applications]
  · (For disc grinders) Hard concrete, compressed cement building materials, brick, sandstone, cement tile
  [Product specification]
  · Diamond Cutter Hatsuri Fitto 178 × 2.2 × 25.4
  · Trusco code: 813-6705
  · Weight: 439 g

  Standard Price:	SGD 243.90
  Days to Ship:	35 Day(s)

• 

  Die Master Diamond

  NORITAKE

  [Features]
  · Diamond wheel providing an extremely good cut.
  · Simultaneous grinding of ultra-hard materials + steel is no problem.
  · The high holding power of the abrasive grain results in a stable cut.
  · High elasticity adhesive is used to minimize abrasive grain sinking in, which provides a superior cut.
  · While ensuring a cut when machining ultra-hard materials, the structure which suppresses abrasive grain damage when machining steel makes it possible to simultaneously grind ultra-hard materials and steel.
  [Applications]
  · Plane grinding and cylindrical grinding for die quenched parts and plates

  Standard Price:	SGD 568.81-
  Days to Ship:	8 Day(s)

• 

  Norton, Mini-Ranger Wild

  SAINTGOBAIN

  Highly durable wheel with less diamond shedding realized by vacuum welding manufacturing process. High-grade diamond abrasive grain that supports various workpieces.
  
  [Features]
  · Highly durable wheel with less diamond grain shedding realized by vacuum welding manufacturing process.
  · High-grade artificial diamond abrasive grain that supports various workpiece materials.
  · Due to the symmetric layer, even if one direction wears the performance can be restored by reversing the installation

  Standard Price:	SGD 206.22-
  Days to Ship:	6 Day(s) or more

• 

  Norton, Cast Iron Ranger

  SAINTGOBAIN

  Diamond wheel exclusively for casting made by vacuum welding manufacturing process. Quickly cuts spouts and cast iron pipe.
  
  [Features]
  · Highly durable wheel with less diamond grain shedding realized by vacuum welding manufacturing process.
  · Makes cutting of cast iron pipes and cast spouts simple and speedy.
  · Due to the symmetric layer, even if one direction wears the performance can be restored by reversing the installation

  Standard Price:	SGD 195.97-
  Days to Ship:	6 Day(s) or more

• 

  Norton, Nor-Laser Plus

  SAINTGOBAIN

  Mix of the highest-class synthetic diamond and bond as a segmented cutter for hard stone with exceptional sharpness.
  
  [Features]
  · Mix of the highest-class synthetic diamond and bond as a segmented cutter with laser chip.
  · "NOR-LASER PLUS" for Stone Materials

  Standard Price:	SGD 217.76
  Days to Ship:	6 Day(s) or more

• 

  Norton, Nor-Laser Max

  SAINTGOBAIN

  Mix of the highest-class synthetic diamond and bond as a segmented cutter for ultra-hard concrete and rebar-reinforced concrete with exceptional sharpness.
  
  [Features]
  · Mix of the highest-class synthetic diamond and bond as a segmented cutter with laser chip.
  · "NOR-LASER PLUS" supports ultra-hard concrete and reinforced concrete

  Standard Price:	SGD 131.69-
  Days to Ship:	6 Day(s) or more

• 

  Norton, Nor-Rim Max

  SAINTGOBAIN

  [Features]
  · A rim cutter equipped with a wave-shaped diamond chip.
  · Suitable for heavy-duty work such as cutting granite.
  · With a waveform substrate and protection chip, this product is suitable for tough workpieces such as granite.

  Standard Price:	SGD 91.99-
  Days to Ship:	6 Day(s) or more

• 

  Norton, Nor-Slicer

  SAINTGOBAIN

  [Features]
  · A rim cutter equipped with a wave-shaped diamond chip.
  · Suitable for heavy-duty work such as cutting granite.
  · NOR-SLICER can cut through splinter-prone tiles with a 1.1 (1.4) mm thick blade.

  Standard Price:	SGD 82.79
  Days to Ship:	6 Day(s) or more

• 

  Norton, Diamond Cup Wheel, Standard Type

  SAINTGOBAIN

  [Features]
  · Diamond cup ideal for concrete and stone chamfering and grinding.
  · Standard Type tunes tip to handle hard concrete and granite too

  Standard Price:	SGD 155.48
  Days to Ship:	6 Day(s) or more

• 

  Scissors (Dry Type) - Red Wave Type

  GOEI

  [Features]
  ·The wave creates an ideal cut.
  ·It is also possible to cut granite.
  [Applications]
  ·For cutting concrete, granite, hard bricks, roof tiles, etc.

  Standard Price:	SGD 65.76-
  Days to Ship:	8 Day(s)

• 

  Scissors (Dry Type) - Blue Segment Type

  GOEI

  [Features]
  · It cuts into the workpiece vigorously.
  · Cutter that can be used for continuous cutting.
  [Applications]
  · For cutting concrete, blocks, cement tiles, etc.

  Standard Price:	SGD 65.76-
  Days to Ship:	8 Day(s)

• 

  Diamond Portable Cutter Blue (Offset)

  ASAHI DIAMOND

  A standard type with excellent balance of sharpness and tool life
  
  [Features]
  · A corner cutter with a protective cover attached to the flange for improved safety

  Standard Price:	SGD 121.95-
  Days to Ship:	9 Day(s) or more

• 

  Diamond Portable Cutter Light Blue

  ASAHI DIAMOND

  Type with emphasis on sharpness that uses the segment wave
  
  [Features]
  · Popular item with emphasis on sharpness that uses the segment wave

  Standard Price:	SGD 180.00
  Days to Ship:	10 Day(s)

• 

  Diamond Portable Cutter Light Green (Single)

  ASAHI DIAMOND

  Portable cutter for concrete with diamond abrasive grains embedded in a circular base that allows high-efficiency grinding and excellent sharpness.

  Standard Price:	SGD 160.10
  Days to Ship:	10 Day(s)

• 

  Diamond Portable Cutter Light Green (Double)

  ASAHI DIAMOND

  [Features]
  · Popular Products Optimal for Cutting Work for Various Concrete Flat Surfaces, Curved Surfaces, and Corner Areas

  Standard Price:	SGD 187.10
  Days to Ship:	10 Day(s)

• 

  Diamond Wheel

  DREMEL

  [Features]
  · The diamond wheel is ideal for cutting hard materials such as marble, concrete, brick, porcelain, ceramics, hardwoods, etc.

  Standard Price:	SGD 38.01-
  Days to Ship:	4 Day(s) or more

• 

  Diamond Cutter Set of 3

  EARTH MAN

  [Features]
  ·For cutting and grooving concrete, blocks, bricks, tiles, roof tiles, etc.
  ·3-disc set of segment, wave hard, and wave.
  ·Compatible tools: disc grinder, electric cutter.
  ·Dry type.

  Standard Price:	SGD 20.35
  Days to Ship:	4 Day(s) or more

• 

  Dry Cup (for Building Materials)

  SANKYO DIAMOND INDUSTRIAL

  Grinding concrete, bricks, blocks, and stone materials. Best suited for rough surface grinding of concrete and stone.

  Standard Price:	SGD 90.06
  Days to Ship:	8 Day(s)

• 

  Dry Saver (for Building Materials)

  SANKYO DIAMOND INDUSTRIAL

  Grinding concrete, bricks, blocks and stones. By embedding in resin, it suppresses encroachment into concrete and stone materials. Ideal for finishing and flat grinding.

  Standard Price:	SGD 138.13
  Days to Ship:	8 Day(s)

• 

  Dry Saver (for Stone)

  SANKYO DIAMOND INDUSTRIAL

  Grinding concrete, bricks, blocks, and stone materials. The embedded resin suppresses any biting into concrete or stone materials. Ideal for finishing and flat grinding.

  Standard Price:	SGD 290.34
  Days to Ship:	10 Day(s)

• 

  Dry Surfacer

  SANKYO DIAMOND INDUSTRIAL

  Grinding concrete, bricks, blocks, and stone materials. For cutting both concrete and stone. 3 times longer life. Cross-shaped tip increases grinding power and also improves durability.

  Standard Price:	SGD 114.53
  Days to Ship:	10 Day(s)

• 

  Dry Cup

  SANKYO DIAMOND INDUSTRIAL

  Grinding concrete, bricks, blocks, and stone materials. Best suited for rough surface grinding of concrete and stone.

  Standard Price:	SGD 218.44
  Days to Ship:	10 Day(s)

• 

  Dry Surfacer Ace

  SANKYO DIAMOND INDUSTRIAL

  Grinding concrete, bricks, blocks, and stone materials. Suitable for minor work. Affordable pricing.
  
  [Features]
  · Workability is improved with surfacer sharpness intact.
  · Equipped with shockless flange: The shockless flange absorbs and reduces vibration. Vibration caused by the manual technique is cut by 60%.
  · Lighter main unit: Main unit is lightweight while still maintaining substrate strength. Weight reduced by 13%.
  · Improved convenience in attaching/detaching: By designing the wrench hole for attaching/detaching according to each manufacturer, it can be reliably installed and removed using the wrench included with the disc grinder.

  Standard Price:	SGD 131.61
  Days to Ship:	8 Day(s)

• 

  Dry Surfacer Ace DX

  SANKYO DIAMOND INDUSTRIAL

  Grinding concrete, bricks, blocks, and stone materials. Suitable for minor work. Affordable pricing.
  
  [Features]
  · It has an improved lifetime.
  · Grinding of granite also has distinctively sharp performance.
  · Equipped with shockless flange: The shockless flange absorbs and reduces vibration. Vibration caused by the manual technique is cut by 60%.
  · Lighter main unit: Main unit has been made lighter while still maintaining substrate strength. Weight reduced by 13%.
  · Improved convenience in attaching/detaching: By designing the wrench hole for attaching/detaching according to each manufacturer, it can be reliably installed and removed using the wrench included with the disc grinder.

  Standard Price:	SGD 132.53
  Days to Ship:	8 Day(s)

• 

  Dry Surfacer Ace Light

  SANKYO DIAMOND INDUSTRIAL

  Grinding concrete, bricks, blocks, and stone materials. Suitable for minor work. Affordable pricing.
  
  [Features]
  · Suitable for minor work. Affordable pricing.
  · Equipped with shockless flange: The shockless flange absorbs and reduces vibration. Vibration caused by the manual technique is cut by 60%.
  · Lighter main unit: Main unit has been made lighter while still maintaining substrate strength. Weight reduced by 13%.
  · Improved convenience in attaching/detaching: By designing the wrench hole for attaching/detaching according to each manufacturer, it can be reliably installed and removed using the wrench included with the disc grinder.

  Standard Price:	SGD 106.04
  Days to Ship:	8 Day(s)

• 

  Concrete Cutting GH950 358X30.

  SANKYO DIAMOND INDUSTRIAL

  Cuts rebar reinforced concrete, resin concrete and high-strength concrete. Laser turbo blade that boasts a superb cutting edge. A diamond tip was designed and developed for cutting electrical poles (with steel bars).

  Standard Price:	SGD 816.71
  Days to Ship:	7 Day(s) or more

• 

  Sharp Cut (M Green)

  SANKYO DIAMOND INDUSTRIAL

  [Applications]
  It can be used for cutting tiles.
  [Features]
  The cutter is easy to use for cutting a variety of tiles, and is a rim-type cutter that gives a clean cut.

  Standard Price:	SGD 62.86-
  Days to Ship:	4 Day(s) or more

• 

  Inazuma LJ 305 mm X30.5

  SANKYO DIAMOND INDUSTRIAL

  Cutting of blocks and secondary concrete products. Razor blade with emphasis on cutting feel used for standard type for both engine cutter and electric cutters.

  Standard Price:	SGD 207.20
  Days to Ship:	7 Day(s) or more

• 

  Block Craftsman

  SANKYO DIAMOND INDUSTRIAL

  Cutting block, red brick, and concrete. Economy type that is convenient for simple cutting. Good finish with blocks, mortar, red bricks and concrete. Amazing long life.

  Standard Price:	SGD 30.47-
  Days to Ship:	8 Day(s) or more

• 

  Block Expert

  SANKYO DIAMOND INDUSTRIAL

  Cutting block, red brick, and concrete. Economy type that is convenient for simple cutting. Good sharp cut with blocks, mortar, red bricks and concrete. Amazing long life.

  Standard Price:	SGD 36.84-
  Days to Ship:	10 Day(s)

• 

  SD Protect Mark II

  SANKYO DIAMOND INDUSTRIAL

  For cutting concrete products in general, reinforced concrete, tiles, bricks, blocks, mortar, ALC. Medium aperture blade for the famous SD cutters

  Standard Price:	SGD 391.46-
  Days to Ship:	10 Day(s) or more

• 

  Pro Tile Cutter

  SANKYO DIAMOND INDUSTRIAL

  Roofing tile cutting. Thin blade for quick cutting of hard tiles. Excellent sharpness with 1.3 mm thick blade. A rim type that produces a clean cut.

  Standard Price:	SGD 65.69
  Days to Ship:	8 Day(s)

• 

  Three S Cutter (for Tile)

  SANKYO DIAMOND INDUSTRIAL

  Roofing tile cutting. Suitable for cutting hard tiles such as Sanshu tiles, Sekishu tiles and Awaji tiles.

  Standard Price:	SGD 111.79
  Days to Ship:	8 Day(s)

• 

  Rakuraku Cut-Kun Cutting Wheel

  SANKYO DIAMOND INDUSTRIAL

  [Applications]
  Can be used for cutting tiles and roof tiles.
  [Features]
  It is a rim type that gives a clean finish to the cut end.

  Standard Price:	SGD 77.68
  Days to Ship:	10 Day(s)

• 

  Tile Nine

  SANKYO DIAMOND INDUSTRIAL

  Cutting porcelain tiles, pottery tiles and hard tiles. Thin and fast! Achieving a clean cut! Blade thickness of 0.9 mm reduces chipping and improves cutting speed!!

  Standard Price:	SGD 77.12
  Days to Ship:	8 Day(s)

• 

  Tile Pro DX

  SANKYO DIAMOND INDUSTRIAL

  Cutting porcelain tiles, ceramic tiles, and hardened tiles. Can be selected according to the sharpness. Less chipping and beautifully cut surface. Blade thickness 1.0 mm: Cutting speed is 20% improved compared to conventional products.

  Standard Price:	SGD 75.61-
  Days to Ship:	8 Day(s) or more

Loading...