KURIMOTO Ducts Fittings

• 

  Spiral Duct Fitting, Single Drop Pipe (Insertion Size × Insertion Size)

  KURIMOTO

  Fitting made of molten zinc plated steel which is JIS G 3302 compliant. [Please check the safety precautions in the general catalog]
  
  [Features]
  · Different straight pipe size x insertion sizes can also be manufactured

  Standard Price:	SGD 25.86-
  Days to Ship:	4 Day(s) or more

• 

  Stainless Steel Duct Fitting, Reducer (Both-Side Insertion Size)

  KURIMOTO

  [Features]·A fitting made of SUS304 2B material compliant with JIS G 4305.

  Standard Price:	SGD 137.05-
  Days to Ship:	4 Day(s) or more

• 

  Stainless Steel Duct Fitting 45° Section Bend

  KURIMOTO

  [Features]
  · JIS G 4305-compliant SUS304 2B material fittings.
  · Only 1.0R is available.
  · Please be sure to check the safety precautions listed in the catalog.

  Standard Price:	SGD 119.46-
  Days to Ship:	11 Day(s) or more

• 

  Spiral Duct Fitting, 45° Section Bend

  KURIMOTO

  A fitting manufactured from electrogalvanized steel conforming to JIS G 3302. [Only 1.0R is available.][Please read the Safety Precautions written in the catalog]
  
  [Features]
  · High-strength: The seam that shapes the spiral duct has a high reinforcing effect. This product can be readily used for high-speed ducts, dust collection ducts, and smoke ventilation ducts.
  · A spiral duct with minimal friction loss and leakage with a high degree of circularity and a smooth inner surface. Therefore, resistance is extremely low. In addition, the closure seam is securely formed by mechanical molding. Therefore, the amount of leakage is confirmed to be negligible at approximately 1/1000 in comparison to square-shaped ducting.
  · The connecting operation for the spiral duct is quick and easy. Good workability for suspending from ceilings. Therefore, the construction period is very short.
  ·

  Standard Price:	SGD 26.64-
  Days to Ship:	4 Day(s) or more

• 

  Stainless Steel Duct Fitting, Nipple

  KURIMOTO

  Fitting made of SUS304 2B conforming to JIS G 4305. [Please confirm the precautions in the catalog for safety]
  
  [Features]
  · Fittings of SUS3042B material according to JISG4305

  Standard Price:	SGD 19.44-
  Days to Ship:	4 Day(s) or more

• 

  Stainless Steel Duct Fitting, 90° Section Bend

  KURIMOTO

  Fitting made of SUS304 2B conforming to JIS G 4305. [Please confirm the precautions in the catalog for safety]
  
  [Features]
  · Fittings of SUS3042B material according to JISG4305

  Standard Price:	SGD 161.13-
  Days to Ship:	8 Day(s) or more

• 

  Spiral Duct Fitting S Pipe (OFFSET)

  KURIMOTO

  Fitting made of molten zinc-plated steel compliant with JIS G 3302. [Please confirm the precautions for safety in the catalog]

  Standard Price:	SGD 92.44-
  Days to Ship:	7 Day(s) or more

• 

  Spiral Duct Fitting T-Pipe

  KURIMOTO

  Fitting made of molten zinc-plated steel conforming to JIS G 3302. [See the safety cautions in the catalog]

  Standard Price:	SGD 22.56-
  Days to Ship:	4 Day(s) or more

• 

  Stainless Steel Duct Fittings, Pipe T

  KURIMOTO

  A fitting made of SUS304 2B material compliant with JIS G 4305.

  Standard Price:	SGD 125.54-
  Days to Ship:	4 Day(s) or more

• 

  Spiral Duct Fitting T Collar

  KURIMOTO

  Fitting made of molten zinc plated steel which conforms to JIS G 3302 standards. [Please confirm the safety precautions in the catalog]
  
  [Features]
  Fitting is made of steel plate and plated with molten zinc in accordance with JISG3302

  Standard Price:	SGD 13.09-
  Days to Ship:	4 Day(s) or more

• 

  Spiral Duct Fitting Nipple

  KURIMOTO

  This fitting is made of molten zinc-plated steel conforming to JIS G 3302. [Check the precautions in the catalog for safety]

  Standard Price:	SGD 6.72-
  Days to Ship:	4 Day(s) or more

• 

  Spiral Duct Fitting 90° Press Bend

  KURIMOTO

  Fitting made of molten zinc plated steel which conforms to JIS G 3302 standards. [Please confirm the safety precautions in the catalog]
  
  [Features]
  Fitting is made of steel plate and plated with molten zinc in accordance with JISG3302

  Standard Price:	SGD 19.99-
  Days to Ship:	4 Day(s) or more

• 

  Spiral Duct Fitting 45° Press Bend

  KURIMOTO

  Fitting made of molten zinc plated steel which conforms to JIS G 3302 standards. [Please confirm the safety precautions in the catalog]
  
  [Features]
  Fitting is made of steel plate and plated with molten zinc in accordance with JISG3302

  Standard Price:	SGD 16.40-
  Days to Ship:	4 Day(s) or more

• 

  Spiral Duct Fitting, 90° Section Bend

  KURIMOTO

  [Features]
  Steel plate fittings with hot dip galvanizing based on JISG3302.
  · Only 1.0R is available.
  · Please be sure to check the safety precautions listed in the catalog.

  Standard Price:	SGD 32.67-
  Days to Ship:	4 Day(s) or more

• 

  Spiral Duct Fitting Cross Pipe

  KURIMOTO

  A fitting made of hot dip galvanized steel in accordance with JIS G 3302. [Confirm safety precautions in the catalog]
  
  [Features]
  A fitting made of hot dip galvanized steel in accordance with JIS G 3302

  Standard Price:	SGD 70.13-
  Days to Ship:	7 Day(s) or more

• 

  Spiral Duct Fitting 45°Y Pipe

  KURIMOTO

  Fitting made of molten zinc plated steel which conforms to JIS G 3302 standards. [Please confirm the safety precautions in the catalog]
  
  [Features]
  Fitting is made of steel plate and plated with molten zinc in accordance with JISG3302

  Standard Price:	SGD 29.95-
  Days to Ship:	4 Day(s) or more

• 

  Stainless Steel Duct Fitting 90° Press Bend

  KURIMOTO

  [Features]·A fitting made of SUS304 2B material compliant with JIS G 4305.

  Standard Price:	SGD 73.98-
  Days to Ship:	4 Day(s) or more

• 

  Stainless Steel Duct Fitting 45° Press Bend

  KURIMOTO

  Fitting made of SUS304 2B conforming to JIS G 4305. [Please confirm the precautions in the catalog for safety]

  Standard Price:	SGD 60.19-
  Days to Ship:	4 Day(s) or more

• 

  Stainless Steel Duct Fitting Cross Pipe

  KURIMOTO

  A fitting made of SUS304 2B material compliant with JIS G 4305.

  Standard Price:	SGD 326.47-
  Days to Ship:	13 Day(s) or more

• 

  Stainless Steel Duct Fittings 45°Y Pipe

  KURIMOTO

  [Features]·A fitting made of SUS304 2B material compliant with JIS G 4305.

  Standard Price:	SGD 176.30-
  Days to Ship:	10 Day(s) or more

• 

  Corrosion Resistant Spiral Duct Fitting 90° Bend

  KURIMOTO

  Fitting which is made with highly corrosion-resistant PVC steel plate. [Please confirm the safety precautions in the catalog]
  
  [Features]
  · Highly corrosion resistant PVC steel plate used for straight pipe section.
  · Bends and nipples for housing (φ100 and φ150 only) made from PVC-coated carbon steel plate are available.
  · Bends and nipples used for toilets and bathrooms in condominiums can be manufactured using PVC steel plates made of the same material as straight piping sections.
  · An epoxy powder coating is applied to specially shaped pipes.
  · Product features superior corrosion, chemical, and moisture resistance properties.
  · Product features favorable adhesion properties due to the base material (spiral duct) as well as excellent shock resistance and abrasion resistance properties

  Standard Price:	SGD 48.83-
  Days to Ship:	7 Day(s) or more

• 

  Corrosion Resistant Spiral Duct Fitting 45° Bend

  KURIMOTO

  A fitting made of highly corrosion resistant PVC-coated steel plate. [Please read the Safety Precautions written in the catalog.]
  
  [Features]
  · A highly corrosion resistant PVC-coated steel plate is used in the straight pipe sections.
  · Household-use bends (⌀ 100, ⌀ 150 only) and nipples can be produced from PVC-coated steel plate.
  · Bends and nipples used for toilets and bathrooms in condominiums can be produced using PVC-coated steel plate made from the same material as the straight piping section.
  · Epoxy powder coating is applied to specially shaped pipes.
  · This product has superior corrosion, chemical, and moisture resistance properties.
  · Strong adherence to base materials (spiral ducting) with superior impact and abrasion resistance.

  Standard Price:	SGD 37.36-
  Days to Ship:	10 Day(s) or more

• 

  Corrosion Resistant Spiral Duct Fitting, Nipple

  KURIMOTO

  Fitting made with highly corrosion-resistant PVC steel plate. [Please confirm the precautions in the catalog for safety]

  Standard Price:	SGD 14.09-
  Days to Ship:	7 Day(s) or more

• 

  Corrosion Resistant Spiral Duct Fitting Collar

  KURIMOTO

  A fitting made of galvanized sheet steel conforming to JIS G 3302, with an applied epoxy powder coating. [Please read the Safety Precautions written in the catalog.]
  
  [Features]
  · A highly corrosion resistant PVC-coated steel plate is used in the straight pipe sections.
  · Bends and nipples used for toilets and bathrooms in condominiums can be produced using PVC-coated steel plate made from the same material as the straight piping section.
  · Epoxy powder coating is applied to specially shaped pipes.
  · This product has superior corrosion, chemical, and moisture resistance properties.
  · Strong adherence to base materials (spiral ducting) with superior impact and abrasion resistance.

  Standard Price:	SGD 20.76-
  Days to Ship:	4 Day(s) or more

• 

  Corrosion Resistant Spiral Duct Coupler T Pipe

  KURIMOTO

  A fitting made of galvanized sheet steel conforming to JIS G 3302, with an applied epoxy powder coating. [Please read the Safety Precautions written in the catalog.]
  
  [Features]
  · A highly corrosion resistant PVC-coated steel plate is used in the straight pipe sections.
  · Production range (⌀ 100–400 mm).
  · Household-use bends (⌀ 100, ⌀ 150 only) and nipples can be produced from PVC-coated steel plate.
  · Bends and nipples used for toilets and bathrooms in condominiums can be produced using PVC-coated steel plate made from the same material as the straight piping section.
  · Epoxy powder coating is applied to specially shaped pipes.
  · This product has superior corrosion, chemical, and moisture resistance properties.
  · Strong adherence to base materials (spiral ducting) with superior impact and abrasion resistance.

  Standard Price:	SGD 47.37-
  Days to Ship:	4 Day(s) or more

• 

  F-Ring Spiral Duct Fittings T Tube Two-way F

  KURIMOTO

  Fitting made of molten zinc-plated steel conforming to JIS G 3302, fitted with a special gasket. [Please study the safety precautions in the catalog.]
  
  [Features]
  · Connection and construction are easy.
  · Standard connection method of a spiral duct is a screw + coating + taping.
  · It is often difficult to ensure the quality of work performed in high places, such as this.
  · F-Ring spiral is equipped with a gasket at its fitting portion. This allows the work to be finished simply by inserting and screwing, making construction secure.
  · Reduces transportation and lifting work.
  ··The overall material volume reduces when pipes with smaller diameters are sequentially inserted into the straight pipe with large diameter.
  · Significantly lower weight compared to prefabricated items.

  Standard Price:	SGD 35.64-
  Days to Ship:	11 Day(s) or more

• 

  F-Ring Spiral Duct Fitting Y Pipe 3-way F

  KURIMOTO

  Fitting made of molten zinc plated steel which conforms to JIS G 3302 and is fitted with a special gasket. [Please check the precautions given in the catalog]
  
  [Features]
  · Easy connection and installation.
  · Standard connection method for spiral duct is screw + coating + taping.
  · Thorough installation may be difficult as installation involves work in an elevated location.
  · An F-Ring spiral is equipped via a gasket to a fitting element and reliable installation can be expected as installation is completed by simply inserting and and tapping screws.
  · Can reduce transportation and lifting work.
  · The overall volume of material can be reduced by sequentially incorporating small diameter pipes into large diameter straight pipes.
  · Accordingly, heavy lifting is dramatically reduced when compared to pipes prefabricated at a factory.

  Standard Price:	SGD 49.33-
  Days to Ship:	11 Day(s) or more

• 

  F-Ring Spiral Duct Fitting, Y Pipe, 2-Way F

  KURIMOTO

  A special gasket is mounted to a fitting made of molten zinc-plated steel conforming to JIS G 3302. [Check the precautions in the catalog for safety]

  Standard Price:	SGD 46.40-
  Days to Ship:	14 Day(s) or more

• 

  F-Ring Spiral Duct Fitting 90° Bend

  KURIMOTO

  Fitting made of molten zinc plated steel conforming to JIS G 3302, fitted with a special gasket. [Please confirm the precautions in the catalog for safety]

  Standard Price:	SGD 34.18-
  Days to Ship:	11 Day(s) or more

• 

  F-Ring Spiral Duct Fitting 45° Bend

  KURIMOTO

  Fitting made of hot dip galvanized steel in accordance with JIS G 3302, fitted with a special gasket. [Confirm safety precautions in the catalog]
  
  [Features]
  · Standard connection method of a spiral duct is screws + caulking + taping.
  · Secure construction may be difficult as application involves work in high places.
  · F-Ring spiral is equipped with a gasket on the fitting part, a reliable construction can be expected since construction is completed by simply inserting and driving in screws.
  · The overall material volume is reduced when pipes with smaller diameters are inserted sequentially into straight pipes with large diameters.
  · Accordingly, this will significantly lower weight in comparison with items prefabricated in a plant.

  Standard Price:	SGD 28.32-
  Days to Ship:	14 Day(s) or more

• 

  F-Ring Spiral Duct Fitting 90° Section Bend

  KURIMOTO

  A fitting made of hot-dip galvanized steel conforming to JIS G 3302 and fitted with a special gasket. [Please read the Safety Precautions written in the catalog.]
  
  [Features]
  · Simple to construct and connect.
  · The standard connection method for spiral ducting consists of a screw + caulking + tape.
  · Secure application performed by working in high places can sometimes be difficult.
  · This fitting can reduce transportation and lifting work.
  · The overall material volume is reduced when pipes with smaller diameters are sequentially inserted into straight pipes with large diameter.
  · Therefore, this fitting will significantly lower the weight compared to items that are prefabricated in a production plants.
  Gasket.
  · The packing material that is used in the Kurimoto F-Ring spiral duct is a special vinyl chloride compound.
  · It has rubber-like elasticity that is not found in conventional vinyl chloride. In addition to being weather/oil/chemical-resistant, it has excellent cold and thermal deformation resistance. The packing is also very similar to rubber in terms of its appearance and texture.
  · It has considerably superior bending fatigue strength and ozone resistance compared to rubber.

  Standard Price:	SGD 50.06-
  Days to Ship:	11 Day(s) or more

• 

  F-Ring Spiral Duct Fitting 45° Section Bend

  KURIMOTO

  Fitting made of molten zinc plated steel conforming to JIS G 3302, fitted with a special gasket. [Please check the safety precautions in the catalog]
  
  [Features]
  ▪ Connection and installation is easy: Standard connection method of a spiral duct is screw + coating + taping.
  · It might be difficult to install in high places.
  · F-Ring spiral is equipped with a gasket to a fitting portion, a solid construct can be expected because construction can be completed simply by inserting and hitting screws.
  ▪·Reduces transportation and lifting work: The overall material volume is reduced when pipes with smaller diameters are sequentially inserted into a straight pipe with a large diameter.
  ▪ This lowers the weight significantly compared to items prefabricated in a plant.

  Standard Price:	SGD 40.76-
  Days to Ship:	14 Day(s) or more

• 

  F-Ring Spiral Duct Fitting, Nipple

  KURIMOTO

  Fitting made of molten zinc plated steel conforming to JIS G 3302, fitted with a special gasket. [Please confirm the precautions in the catalog for safety]
  
  [Features]
  · Connection and construction are easy.
  · Standard connection method of a spiral duct is a screw + coating + taping.
  · Thorough application may be difficult as application involves work at high places.
  · The F-Ring spiral is equipped with a gasket to a fitting portion, and because the construction is only finished by inserting and striking screws, you can expect a solid structure.
  · Can reduce transport, lifting and operations.
  ▪·The overall material volume is reduced when pipes with smaller diameters are sequentially inserted into the straight pipe with large diameter.
  ▪ Therefore, this will significantly lower the weight compared to items prefabricated in a plant.

  Standard Price:	SGD 14.24-
  Days to Ship:	11 Day(s) or more

Loading...