KTC(KYOTO TOOL) Vehicle Maintenance Tools（Page3）

• 

  Multi Puller Arm M

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Multi Puller AS301.

  Standard Price:	SGD 28.86
  Days to Ship:	9 Day(s)

• 

  Multi Puller Hub Plate

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Multi Puller AS301.

  Standard Price:	SGD 132.51
  Days to Ship:	9 Day(s)

• 

  Multi Puller Hub Holder 1 Assy

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Multi Puller AS301.

  Standard Price:	SGD 111.76
  Days to Ship:	9 Day(s)

• 

  Multi Puller Hub Holder 2 Assy

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Multi Puller AS301.

  Standard Price:	SGD 157.66
  Days to Ship:	8 Day(s)

• 

  Multi Puller Race Shaft

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Multi Puller AS301.

  Standard Price:	SGD 82.52
  Days to Ship:	8 Day(s)

• 

  Multi Puller Plate A

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Multi Puller AS301.

  Standard Price:	SGD 56.32
  Days to Ship:	8 Day(s)

• 

  Tie Rod End Separator (Offset Type)

  KTC(KYOTO TOOL)

  [Applications]
  · Separation of tie rod end.
  [Features]
  · Tough design for increased power.
  · Rated output is set to 15 kN (1.5 t) and maximum output is set to 30 kN (3 t).
  · Supports a larger output compared to conventional part (KTC BJU-1945).
  · Highly durable design.
  · The offset shape increases durability.
  · Fits various models perfectly.
  · Range of opening: 16 mm to 50 mm
  · Suitable for tie rod ends used in mini cars to 3 L class automobiles.
  · Easy operation increases efficiency.
  · Mount and remove just by operating the thrust bolt.
  · Perform work easily with drive tools.
  · Adopted a 9.5 sq. square drive. Can hold reaction force with drive tools.
  · Comes with a "drop-prevention lanyard" for safety.

  Standard Price:	SGD 199.23
  Days to Ship:	9 Day(s)

• 

  Tie Rod End Separator Claw

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Ball Joint Separator AS202A.

  Standard Price:	SGD 116.79
  Days to Ship:	8 Day(s)

• 

  Tie Rod End Separator Jaw

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Ball Joint Separator AS202A.

  Standard Price:	SGD 98.87
  Days to Ship:	8 Day(s)

• 

  Ball Joint Separator (Offset Type)

  KTC(KYOTO TOOL)

  [Applications]
  · Use to separate ball joints.
  [Features]
  · Tough design with 2.5 t rated output
  · Mount and remove just by operating the thrust bolt.
  · Perform work easily with drive tools.
  · Adopted a 9.5 sq. square drive. Can hold reaction force with drive tools.
  · Exchange claw and jaw depending on the work environment.
  · Comes with a "drop-prevention lanyard" for safety.

  Standard Price:	SGD 411.74
  Days to Ship:	8 Day(s)

• 

  12.7 Sq. Hub Nut Socket For Impact Wrench

  KTC(KYOTO TOOL)

  [Features]
  · Set of AS308-30W and 32W impact sockets for loosening double hexagon shape front (rear) axle hub nuts. Adopted the AMBAC system (PAT.) to prevent the pin from falling out during use.

  Standard Price:	SGD 48.46-
  Days to Ship:	9 Day(s)

• 

  12.7 Sq. Hub Nut Socket Set For Impact Wrench

  KTC(KYOTO TOOL)

  [Applications]
  · For using impact wrenches to loosen double hexagon shaped front (rear) axle hub nuts in Toyota vehicles.
  [Features]
  · The impact wrench socket has a double hexagon shape to match the shape of the hub nut.
  · Deep opening and thin outer diameter shape matches the shape of the hub nut.
  · Total 75 mm long semi-deep type that does not interfere with drive shaft threads.

  Standard Price:	SGD 89.44
  Days to Ship:	9 Day(s)

• 

  Pitman Arm Puller

  KTC(KYOTO TOOL)

  [Applications]
  · Removing pitman arms.
  [Features]
  · The heat-treated forged claw has outstanding durability.
  · Comes with a "drop-prevention lanyard" for safety.
  · The claws bite inward when the center screw is tightened.
  [Scope]
  · Pitman outer diameter ø37 to ø47

  Standard Price:	SGD 293.28
  Days to Ship:	8 Day(s)

• 

  Screw Size Conversion Adapter Set For Slide Hammer Puller

  KTC(KYOTO TOOL)

  [Features]
  · Screw size conversion adapter set for Slide Hammer Puller AUD3.

  Standard Price:	SGD 74.67-
  Days to Ship:	8 Day(s)

• 

  Drive Shaft Joint Puller Set For Slide Hammer Puller

  KTC(KYOTO TOOL)

  [Features]
  · Drive shaft joint puller set for slide hammer AUD3.

  Standard Price:	SGD 302.27
  Days to Ship:	8 Day(s)

• 

  Shaft Handle For AUD3

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Slide Hammer Puller AUD3.

  Standard Price:	SGD 185.64
  Days to Ship:	8 Day(s)

• 

  Hexagon Nut For AUD3

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Slide Hammer Puller AUD3.

  Standard Price:	SGD 28.55
  Days to Ship:	8 Day(s)

• 

  Weight For AUD3

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Slide Hammer Puller AUD3.

  Standard Price:	SGD 71.62
  Days to Ship:	8 Day(s)

• 

  Drive Shaft Joint Puller For Slide Hammer Puller

  KTC(KYOTO TOOL)

  [Features]
  · Drive shaft joint puller for slide hammer puller AUD3.

  Standard Price:	SGD 43.64-
  Days to Ship:	8 Day(s)

• 

  Shaft Handle For AUD4

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Slide Hammer Puller AUD4.

  Standard Price:	SGD 198.49
  Days to Ship:	8 Day(s)

• 

  Hexagon Nut For AUD4

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Slide Hammer Puller AUD4.

  Standard Price:	SGD 30.92
  Days to Ship:	8 Day(s)

• 

  Weight For AUD4

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Slide Hammer Puller AUD4.

  Standard Price:	SGD 136.62
  Days to Ship:	8 Day(s)

• 

  Hub Puller For Slide Hammer Puller (For 4 Holes / 5 Holes)

  KTC(KYOTO TOOL)

  [Applications]
  · Removing axle shafts, removing brake drums and extruding drive shafts.
  [Features]
  · This puller can be used for both 4 holes and 5 holes.
  · Features a 9.5 sq. square drive and a 27 mm width across flats, allowing rotation to be stopped with a drive tool or monkey wrench, etc.
  · Can be used with AUD4.

  Standard Price:	SGD 345.32
  Days to Ship:	9 Day(s)

• 

  Slide Hammer Puller Hub Puller (For 6 Holes)

  KTC(KYOTO TOOL)

  [Applications]
  · Removing axle shafts, removing brake drums and extruding drive shafts.
  [Scope]
  · 6-hole type hub for vehicles.
  [Features]
  · Deep hole design makes this product compatible with front free-wheeling hubs for 4WD vehicles.
  · Features a 12.7 sq. square drive and a 27 mm width across flats, allowing rotation to be stopped with a drive tool or monkey wrench, etc.
  · Can be used with AUD4.

  Standard Price:	SGD 249.38
  Days to Ship:	8 Day(s)

• 

  Snap Ring Pliers AS403A

  KTC(KYOTO TOOL)

  [Applications]
  · Use these pliers to remove (attach) snap rings that do not have a hooking hole.
  [Scope]
  
  · Normal type of snap ring with no hooking holes.
  · Thin claw tip is compatible even with rings having a narrow opening.
  
  · This tool is dedicated for snap rings that have a narrow opening and angled notches and are used in Honda vehicles
  · Claws are replaceable in the event of wear or damage.
  [Features]
  
  · Stepped tip shape increases stability when removing or attaching snap rings that were difficult to handle before.
  · Work from either above or from the side of the shaft.
  
  · Remove or attach Honda vehicle snap rings, which were difficult to handle before.

  Standard Price:	SGD 51.90
  Days to Ship:	9 Day(s)

• 

  Claw For AS403A

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Snap Ring Pliers AS403A.

  Standard Price:	SGD 48.70
  Days to Ship:	8 Day(s)

• 

  Snap Ring Pliers AS403B

  KTC(KYOTO TOOL)

  [Applications]
  · Use these pliers to remove (attach) snap rings that do not have a hooking hole.
  [Scope]
  
  · Normal type of snap ring with no hooking holes.
  · Thin claw tip is compatible even with rings having a narrow opening.
  
  · This tool is dedicated for snap rings that have a narrow opening and angled notches and are used in Honda vehicles
  · Claws are replaceable in the event of wear or damage.
  [Features]
  
  · Stepped tip shape increases stability when removing or attaching snap rings that were difficult to handle before.
  · Work from either above or from the side of the shaft.
  
  · Remove or attach Honda vehicle snap rings, which were difficult to handle before.

  Standard Price:	SGD 51.90
  Days to Ship:	9 Day(s)

• 

  Claw For AS403B

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Snap Ring Pliers AS403B.

  Standard Price:	SGD 51.60
  Days to Ship:	8 Day(s)

• 

  Drive Shaft Remover For Slide Hammer Puller

  KTC(KYOTO TOOL)

  [Applications]
  · Removing the drive shaft from transaxles in FF vehicles.
  · This dedicated tool is used with slide hammer pullers (AUD3).

  Standard Price:	SGD 145.09
  Days to Ship:	8 Day(s)

• 

  Boot Band Tool With Cutter

  KTC(KYOTO TOOL)

  [Applications]
  · Tightening and cutting joint boot fixing bands for drive shafts.
  [Scope]
  · Outstanding boot bands used in mini cars to passenger cars. (Applicable for all sizes)
  [Features]
  · Ratchet mechanism enables efficient winding.
  · Bending to cutting boot bands performed in one action.

  Standard Price:	SGD 120.98
  Days to Ship:	8 Day(s)

• 

  Boot Band Tool

  KTC(KYOTO TOOL)

  [Applications]
  · Dedicated tool for clamp type boot bands on drive shafts used in automobiles.
  [Scope]
  · Compatible with mini to passenger cars equipped with clamp type boot bands. (Compatible with import vehicles)
  [Features]
  · Clamp the boot band easily just by screwing in the center bolt.
  · Compatible with ratchet handle, etc., for quick operations using light force. (Hexagon width across flats 14 mm)
  · Center bolt is flanged so the wrench does not deviate even when using offset wrench.
  · Handle grip is made of non-slip plastic.
  · Clamping section adopted a claw shape that does not rise up.

  Standard Price:	SGD 226.10
  Days to Ship:	8 Day(s)

• 

  Housing Nut Wrench (For Hexagon / Octagon Nut)

  KTC(KYOTO TOOL)

  [Applications]
  · Tightening and loosening rear housing nuts of large vehicles.
  [Scope]
  · Rear housing nuts used in large vehicles (4 t and larger).
  Hexagon: Width across flats 85 mm to 130 mm
  Octagon: Width across flats 90 mm to 125 mm
  [Features]
  · Special claw shape supports both hexagon and octagon bolts.
  · Special claw shape securely holds the sides of the nut.
  · Just turn the hexagon knob with an offset wrench or drive tool with a 17 mm width across flats.

  Standard Price:	SGD 665.35
  Days to Ship:	8 Day(s)

• 

  Housing Nut Wrench (For Round Nut)

  KTC(KYOTO TOOL)

  [Applications]
  · Tightening and loosening rear housing nuts.
  [Scope]
  · Rear housing nuts used with compact vehicles (2 t class).
  [Features]
  · Compatible with a variety of models just by sliding the pin to the appropriate pitch.
  · Scale display is on the wrench body, simplifying centering work.

  Standard Price:	SGD 116.79
  Days to Ship:	8 Day(s)

• 

  Pin A (For Pin Hole Diameter ø6.8 To 9)

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Housing Nut Wrench AS352.

  Standard Price:	SGD 37.24
  Days to Ship:	8 Day(s)

• 

  Pin B (For Pin Hole Diameter ø9.1 To 10)

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Housing Nut Wrench AS352.

  Standard Price:	SGD 37.24
  Days to Ship:	8 Day(s)

• 

  Rear Hub Puller For Large Vehicle

  KTC(KYOTO TOOL)

  [Applications]
  · Removing rear wheel hubs on large vehicles.
  [Scope]
  · Rear wheel hubs on large vehicles (4 t or larger) that meet the following conditions.
  　· 8 or 10 holes (number of axle shaft mounting bolts)
  · P.C.D 140 mm to 188 mm
  · Axle shaft mounting bolt size M12 to M16
  [Features]
  · Vehicle's axle shaft mounting bolts are used so that aluminum wheels, etc., will not be damaged.
  · Just tighten with an offset wrench or socket (27 mm width across flats) and a drive tool.

  Standard Price:	SGD 483.29
  Days to Ship:	9 Day(s)

• 

  Rear Hub Puller For Large Vehicle Center Bolt

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Rear Hub Puller for Large Vehicle AS353.

  Standard Price:	SGD 78.54
  Days to Ship:	8 Day(s)

• 

  Rear Hub Puller For Large Vehicles, Spacer

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Rear Hub Puller for Large Vehicle AS353.

  Standard Price:	SGD 84.41
  Days to Ship:	8 Day(s)

• 

  Front Hub Puller For Large Vehicle

  KTC(KYOTO TOOL)

  [Applications]
  · Removing front wheel hubs on large vehicles.
  [Scope]
  · Front wheel hubs on large vehicles (4 t or larger) that meet the following conditions.
  　· 6, 8 or 10-hole (6 or 8 holes: JIS method, 10 holes: ISO method) wheel
  · P.C.D 222.25 mm to 335 mm
  · Hub bolt size M20 × 1.5, M22 × 1.5, M24 × 1.5
  [Features]
  · Puller is attached to hub bolt for removal so that aluminum wheels, etc., will not be damaged.
  · L and R stamped on arm body for quick identification of left and right.
  · Hub bolt sizes are M20, M22 and M24. Can identify bolt sizes by the number of lines. (M20: 1 line, M22: 2 lines, M24: 3 lines)

  Standard Price:	SGD 862.14
  Days to Ship:	8 Day(s)

• 

  Front Hub Puller For Large Vehicle Center Bolt

  KTC(KYOTO TOOL)

  It is a spare part for the front hub puller AS354 for large vehicles.

  Standard Price:	SGD 91.12
  Days to Ship:	8 Day(s)

• 

  Front Hub Puller Arm For Large Vehicle

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Front Hub Puller for Large Vehicle AS354. (Includes 2 pcs)

  Standard Price:	SGD 159.76-
  Days to Ship:	8 Day(s)

• 

  Air Grease Feeder Locking Type Upper Cone

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Air Grease Feeder AVG35.

  Standard Price:	SGD 276.90
  Days to Ship:	8 Day(s)

• 

  Air Grease Feeder Nozzle (4 Pc Set)

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Air Grease Feeder AVG35.

  Standard Price:	SGD 69.73
  Days to Ship:	9 Day(s)

• 

  Strut Spring Compressor Standard Arm (Outer Diameter 90 To 170)

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Strut Spring Compressor AS10.

  Standard Price:	SGD 673.07
  Days to Ship:	8 Day(s)

• 

  Strut Spring Compressor Large Arm (Outer Diameter 135 to 220)

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Strut Spring Compressor AS10.

  Standard Price:	SGD 886.30
  Days to Ship:	8 Day(s)

Loading...