MISUMI Air Nozzles

• • Recommendation

  

  Flat Air Nozzle Standard Type, ABS Resin

  MISUMI

  Standard Type of Resin Air Nozzle

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 15.90
  Days to Ship:	Same day

• 

  Air Blow Nozzle. Male/Female Thread, Knurling, Terminal Block, Non-Annealed

  MISUMI

  ◆Features: You can choose from male thread (annealed or non-annealed), female thread (annealed or non-annealed), knurled iris (annealed), or terminal block (annealed).
  
   *Annealed pipes with an outer diameter of 1.0 to 3.0 can be bent by hand. (Outer diameter 4.0 or more is not allowed)
   The minimum bending radius is outer diameter x 3, and please bend carefully to avoid applying stress to the brazed part.
  
  ◆Air source: Compressor◆Injection shape: Point◆Material: SUS304
  From August 2021, we will be adding nominal size standards.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Air Blow Nozzles - Pipe Nozzles

  MISUMI

  ◆Features: Straight type, male thread type, and female thread type are available.
      *When using male or female thread types, we recommend using a nozzle joint to blow at the desired angle.

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• • On Sale Till 31/03/2025

  

  Point Nozzles

  MISUMI

  ◆Features: Point nozzle that can be adjusted at any angle by tightening the hexagonal nut.
  ◆Air source: Compressor◆Injection shape: Point

  CAD ：

  2D / 3D

  Standard Price:	SGD 36.12-
  	Special Price
  Days to Ship:	Same day or more

• • On Sale Till 31/03/2025

  

  Air Blow Nozzle Male/Female Thread, Height Adjustment, Strut Clamp Mounting, Duplex Male Thread, Barbed Fitting, Hose Nipple

  MISUMI

  ◆Features: Male/female thread type, height adjustment male/female thread type, post clamp mounting type, 2-core male thread type,     Barb joint type, hose nipple type You can choose from.
      *Pipe with an outer diameter of 1.0 to 3.0 can be bent by hand. (Outside diameter 4.0 or more is not possible)
      Please bend carefully, using the outside diameter x 3 as a guideline for the minimum bending radius.
  ◆Air source: Compressor◆Injection shape: Point◆Material: SUS304
  Nominal size standards will be added from August 2021.
  (*ABNZSL2-8.0 and ABNZS2-8.0 are scheduled to be released on September 20, 2021.)

  • Volume Discount

  CAD ：

  2D / 3D

  	Special Price
  Days to Ship:	Same day or more

• 

  Flat Air Nozzles - Wide Type

  MISUMI

  ◆Features: A wide resin air nozzle with a nozzle width of 108mm. The jet nozzle width is approximately twice that of the standard type (AFTSP), making it ideal when you want to reduce the number of parts.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 31.00
  Days to Ship:	Same day

• 

  Air Nozzles - De Laval Type

  MISUMI

  ◆Features: This air nozzle is capable of blowing at sonic speeds due to its special internal structure.
      A metal air nozzle with powerful ejection force by blowing at the speed of sound.
      Materials include A5052 and SUS303.
  
  ◆Air source: Compressor◆Injection shape: Point
  ◆Maximum working pressure: 0.7MPa◆Heat-resistant temperature: 200℃

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 47.17-
  Days to Ship:	Same day or more

• 

  Flat Air Nozzles - Standard

  MISUMI

  Air Nozzles with air projection angle vertical to the thread face.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 24.26
  Days to Ship:	Same day

• 

  Air Nozzles - Economy Type

  MISUMI

  ◆Features: A simple and inexpensive metal (SUS304) air nozzle.
  [NZAK] has a narrow injection port and the gas spreads out in a fan shape along the slit.
  [NZAL] has a wide injection port and sprays air at a wide angle.
  ◆Applications:
  [NZAK] Steam humidification, drying, air blowing, etc.
  [NZAL] Dustproofing, air blowing, etc.
  ◆Air source: Compressor◆Injection shape: Fan-shaped
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 12.40-
  Days to Ship:	Same day or more

• 

  Flat Air Nozzles - Air Amplify Compact Type

  MISUMI

  Compact Amplify Type of Air Nozzle with 35mm of Overall Length

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 21.90
  Days to Ship:	Same day

• 

  Point Nozzles - Compact

  MISUMI

  Compact Nozzles adjustable to any angle.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 38.75-
  Days to Ship:	6 Day(s) or more

• 

  Air Blow Nozzles - Nozzles with Attachment Plate - 1-Hole Type, 2-Hole Type

  MISUMI

  ◆Features: A product that can be used by directly inserting a tube with an inner diameter of φ2.5.

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Air Blow Nozzles - Copper Pipes for Air Blow

  MISUMI

  ◆Features: Male thread type (straight or with orifice at the end) and female thread type (straight) are available.
      The materials of the pipes are annealed copper tube (C1220T-0) and copper tube (C1220T).

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Flat Air Nozzle Standard Type, Metal, Machined

  MISUMI

  Standard Type of Metal Air Nozzle

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 107.81-
  Days to Ship:	Same day or more

• 

  Air Blow Nozzles - Unit Type

  MISUMI

  ◆ Features: A preassembled coupling, copper pipe, and tip nozzle unit. Eliminates the need to assemble parts separately.
      Can be bent to any angle. Reduces the hassle of managing different parts.
      Point (DYPN), Slit (DYPNB), and Cross-Shaped (DYPNC) tips can be selected.
      Length selectable in 10 mm increments between 150 and 350 mm. Tube available in three colors: blue, black and red.
  ◆ Air Source: Compressor
  ◆ Material: Main body (copper pipe), tube (nylon), tip nozzle / fitting (brass)
  
  ◆ For Technical Data, see here.
  ◆ Free sample rental available here
  ◆ For Application Examples, see here.
  
  
  

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• 

  [Clean & Pack]Flat Air Nozzles - Standard, Metal, Casting

  MISUMI

  Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
  This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

  ■Part Number for Clean & Pack Products

  · Degreasing (Anti-rust single packing)	: Part Number SL-□□
  · Precision cleaning (Degassing double packing)	: Part Number SH-□□
  · Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

  Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
  SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
  					Post battery assembly process
  SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
  					LCD-related post assembly process
  					In-vehicle camera assembly process
  SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
  					Liquid crystal deposition process
  					Pre-OLED process

  ■ Notes
  Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
  Please be careful about the application location and storage environment.

  
  ◆ Features: SUS304 (cast) air nozzle with flat mounting angle.
  ◆ Applications: For various applications including removal of oil, water droplets, and debris; cooling/drying; air curtains, etc.
  ◆ Air Source: Compressor ◆ Injection Configuration: Straight
  ◆ Max. Operating Pressure: 0.4 MPa ◆ Heat Resistant Temperature: 200°C
  
  ◆ For Technical Data, see here.
  
  
  

  • Volume Discount

  Standard Price:	SGD 112.80-
  Days to Ship:	6 Day(s) or more

• 

  Terminals for Nozzles - Clamp Type

  MISUMI

  A terminal that can be directly attached to the nozzle.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 10.23-
  Days to Ship:	4 Day(s) or more

• 

  Nozzle Joints

  MISUMI

  ◆Features: A flexible metal joint that can be fixed in any position.
      Loosen the cap, move the ball and tighten it to fix it in any position.
      The adjustable angle range is 50°. Can be used for both air and liquid.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 59.36-
  Days to Ship:	Same day or more

• 

  Slit Steel Pipe Nozzles

  MISUMI

  ◆Features: A simple nozzle with a slit in the copper tube. Suitable for use when the distance to the target is close.
  ◆Precautions for use
  Actual jet width, collision force, etc. may vary. Also, the slit width may widen depending on air pressure, etc.

  CAD ：

  2D / 3D

  Days to Ship:	7 Day(s) or more

• 

  90 degree air nozzle Compact type Resin type

  MISUMI

  ◆Features: Compact air nozzle made of ABS resin with a total length of approximately 25 mm and an installation angle of 90 degrees.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 20.21
  Days to Ship:	Same day

• 

  Flat air nozzle Air amplification type Resin type

  MISUMI

  Amplify Type of Resin Air Nozzle intended to suck in the surrounding air and to blow it

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 16.85
  Days to Ship:	Same day

• 

  Rotary Nozzles - Short

  MISUMI

  "Are intended to blow the air by rotating themselves and thus, can blow the air more strongly than standard nozzles."

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 67.39
  Days to Ship:	4 Day(s) or more

• 

  Nozzle Joint

  MISUMI

  ◆Features: A flexible joint made of resin that can be fixed in any position. Can be used in conjunction.
      Loosen the cap, move the ball and tighten it to fix it in any position.
      The adjustable angle range is 50°. Can be used for both air and liquid.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 16.00
  Days to Ship:	4 Day(s) or more

• 

  Pipe Nozzles/Steel Pipes for Air Nozzles

  MISUMI

  [Features]·This shaved steel pipe can be fitted with a nozzle.

  CAD ：

  2D / 3D

  Days to Ship:	7 Day(s) or more

• 

  Point Nozzles - Reverse Flow Prevention

  MISUMI

  Point Nozzles with Built-in Check Valve Mechanism.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 43.80-
  Days to Ship:	6 Day(s) or more

• 

  Conical Spray Air Nozzles

  MISUMI

  Air Nozzles enabling air blow in a conical form.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 30.32
  Days to Ship:	Same day

• 

  Flat Air Nozzles - Air Amplify Wide Type

  MISUMI

  Wide Amplify Type of Air Nozzle with 100mm of Blow Port Width

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 40.44
  Days to Ship:	Same day

• 

  High Flow Rate Blower Nozzles

  MISUMI

  Air Nozzles capable of efficiently blowing air from blowers

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 30.32-
  Days to Ship:	4 Day(s) or more

• 

  Flow Rate Control Nozzles

  MISUMI

  Air Nozzles which allow for adjustment of the flow rate.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 32.00
  Days to Ship:	4 Day(s) or more

• • On Sale Till 31/03/2025

  

  90 degree air nozzle compact type metal type

  MISUMI

  ◆Features: A compact air nozzle made of metal (aluminum) with a total length of approximately 25 mm and an installation angle of 90 degrees. The surface treatment is electroless nickel plating.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 109.50
  	Special Price
  Days to Ship:	Quote

• 

  Steel Pipe Nozzles - Both Ends Threaded / Tapped, One End Threaded One End Tapped

  MISUMI

  [Features]·This steel pipe nozzle can blow through holes drilled at regular intervals. ·The mounting angle is flat.

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Terminals for Nozzles - Block Type

  MISUMI

  A terminal that can be directly attached to the nozzle.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 8.05-
  Days to Ship:	4 Day(s) or more

• 

  Nozzles for Pipe Washing

  MISUMI

  ◆Features: Nozzle suitable for pipe cleaning.
  ◆Application: Use when blowing the outer circumference of cylindrical workpieces (pipes, etc.).
  ◆Air source: Compressor◆Material: A6063

  CAD ：

  2D / 3D

  Standard Price:	SGD 73.62-
  Days to Ship:	6 Day(s) or more

• 

  Dust Collection Nozzles

  MISUMI

  ◆ Features: A dust collecting nozzle that collects dust removed by the nozzle.
      Can also be used for spraying applications. Anti-static, allowing use in a wide range of environments.
      Made from plastic (PE) for economical pricing. Flange machining and L-shaped bracket mount machining also possible.
  ◆ Heat Resistance Temperature: 70°C
  
  ◆ For Technical Data, see here.
  ◆ Free sample rental available here
  ◆ For Application Examples, see here.
  
  
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 42.12-
  Days to Ship:	4 Day(s) or more

• 

  Rotary Nozzles - Long

  MISUMI

  ◆ Features: Suitable for blowing into cylindrical workpieces.
  Rotates while blowing air, producing more powerful air flow than normal.
      The tip shape can be selected from narrow angle, wide angle, side, or wide angle + side.
      *For the short type, select from [SPNZ].
  ◆ Air Source: Compressor ◆ Heat Resistant Temperature: 60°C.
  
  ◆ For Technical Data, see here.
  ◆ Free sample rental available here
  
  
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 87.60
  Days to Ship:	4 Day(s) or more

• 

  Spray Nozzles/Round Type

  MISUMI

  ◆Features: A resin (PP) air nozzle that injects powerful straight air from the hole at the tip.
  ◆Applications: Can be used in high-temperature environments, such as removing oil, water droplets, and chips, cooling, drying, and blowing into narrow spaces.
  ◆Air source: Compressor
  ◆Maximum working pressure: 0.7MPa◆Heat-resistant temperature: 70℃

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 12.66
  Days to Ship:	4 Day(s) or more

• 

  Terminals for Nozzles - Multi Port Clamp

  MISUMI

  [Features]·A terminal for nozzles, multi-link type. [Material]·It is A5052.

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• 

  Flat Air Nozzles - Compact Type (Plastic)

  MISUMI

  ◆Features: A compact resin air nozzle with a total length of 30 mm and a nozzle width of 33 mm.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 20.21
  Days to Ship:	Same day

• 

  90° Air Nozzle - Vertica Blow Type

  MISUMI

  90° Air Nozzles connectable with each other.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 24.26
  Days to Ship:	Same day

• 

  Radial Air Nozzles

  MISUMI

  "Air Nozzles enabling air blow in a radial form. For the injection direction, either of three patterns is selectable."

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 25.27
  Days to Ship:	Same day or more

• 

  Nozzles with Swaged Sleeve Couplings

  MISUMI

  "Can blow the air from the copper pipe efficiently, by attaching to the pipe."

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 19.37-
  Days to Ship:	4 Day(s) or more

• 

  Flat Air Nozzle Standard Type, Metal, Casting

  MISUMI

  ◆ Features: SUS304 (cast) air nozzle with flat mounting angle.
  41% more cost-effective than conventional SUS flat nozzles produced by machining, thanks to a revised manufacturing method.
  *Select [AFTSP/AFTSF] for a resin version, or [AFTSA/AFTSS] for an all-machined, non-cast version.
  
  ◆ Applications: For various applications including removal of oil, water droplets, and debris; cooling/drying; air curtains, etc.
  ◆ Air Source: Compressor ◆ Injection Configuration: Straight
  ◆ Max. Operating Pressure: 0.4 MPa ◆ Heat Resistant Temperature: 200°C
  
  ◆ For Technical Data, see here.
  ◆ Free sample rental available here
  
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 149.93
  Days to Ship:	4 Day(s) or more

• • On Sale Till 31/03/2025

  

  Spray Nozzles, Circular Spray Pattern - Standard

  MISUMI

  ◆Features: A metal air nozzle that sprays powerful straight air from the hole at the tip.
  ◆Applications: Can be used in high-temperature environments such as removing oil, water droplets, and chips, cooling/drying, and blowing into narrow spaces.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 53.24-
  	Special Price
  Days to Ship:	4 Day(s) or more

• 

  Point Nozzles - Air Amplified

  MISUMI

  ◆ Features: Space-saving design with an overall length of approximately 45 mm.
  Made with PPS resin to reduce cost while improving oil resistance and heat resistance.
      An amplified point nozzle that blows while including the surrounding air.
      Provides high colliding force with a small amount of air, reducing compressor air consumption and saving energy.
  The connecting port has a hexagonal hole shape, making it easy to replace.
  
  ◆ Applications: Suitable for a range of applications such as cleaning automobile parts.
  ◆ Air Source: Compressor ◆ Injection Configuration: Point
  ◆ Max. Operating Pressure: 0.7 MPa ◆ Heat Resistant Temperature: 200°C
  
  ◆ Free sample rental available here
  ◆ For Application Examples, see here.
  
  
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 13.82
  Days to Ship:	4 Day(s) or more

• 

  [Clean & Pack]Nozzles with Swaged Sleeve Fitting

  MISUMI

  Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
  This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

  ■Part Number for Clean & Pack Products

  · Degreasing (Anti-rust single packing)	: Part Number SL-□□
  · Precision cleaning (Degassing double packing)	: Part Number SH-□□
  · Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

  Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
  SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
  					Post battery assembly process
  SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
  					LCD-related post assembly process
  					In-vehicle camera assembly process
  SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
  					Liquid crystal deposition process
  					Pre-OLED process

  ■ Notes
  Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
  Please be careful about the application location and storage environment.

  
  ◆Features: A SUS304 nozzle that can be connected directly to a pipe and is recommended for pinpoint blowing.
      By mounting it to the tip of the copper pipe, the air efficiency can be improved compared to when using only the copper pipe.
      The tip shape is selectable from slit (SKNF) and single hole (SKNS).
  
  ◆ Air Source: Compressor ◆ Injection Configuration: Point
  ◆ Max. Operating Pressure: 0.7 MPa ◆ Heat Resistant Temperature: 200°C
  
  ◆See here for Technical Data (SKNF)
  ◆See here for Technical Data (SKNS)
  
  
  

  • Volume Discount

  Standard Price:	SGD 21.90-
  Days to Ship:	6 Day(s) or more

Loading...