(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

  • Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

MISUMI Punches

Days to Ship
  • All
  • 4 Day(s) or Less
  • 5 Day(s) or Less
  • 6 Day(s) or Less
  • 7 Day(s) or Less
  • 11 Day(s) or Less
  • Shoulder Punches

    Shoulder Punches

    MISUMI

    -The most versatile punch for punching. ・You can choose from 3 types of materials: die steel, high speed steel, and powder high speed steel. ・There is also a Jector Punch that has a scrap removal pin built into the punch to prevent scrap removal.

    • FLANGE
    • SKH51
    • SKD11
    • POWDER HSS
    CAD :
    2D / 3D
    Days to Ship: 4 Day(s) or more
  • Jector Punches

    Jector Punches

    MISUMI

    Shoulder punch A punch with a kicker pin built into the inside for removing scraps. ・If you want to strengthen the scum removal force, please use the "spring reinforced type". ・There is also a "large pin diameter type" in which the pin for scrap removal is larger than usual.

    • FLANGE
    • SKH51
    • SKD11
    • POWDER HSS
    CAD :
    2D / 3D
    Days to Ship: 4 Day(s) or more
  • Jector Punches TiCN Coating

    Jector Punches TiCN Coating

    MISUMI

    ・A highly durable product that suppresses cutting edge wear and reduces maintenance man-hours and total costs. ・Added die steel lineup and cutting edge length X type. ・If you want to strengthen the scum removal force, please use the "spring reinforced type". [What is TiCN coating]・TiCN is a coating widely used in press molds. Improved punch life can be expected by increasing the wear resistance of the cutting edge. ・By reviewing the s...Readmore

    • FLANGE
    • POWDER HSS
    • TiCN
    CAD :
    2D / 3D
    Days to Ship: 5 Day(s) or more
  • Shoulder Punches TiCN Coating

    Shoulder Punches TiCN Coating

    MISUMI

    ・A highly durable product that suppresses cutting edge wear and reduces maintenance man-hours and total costs. ・Added die steel lineup and cutting edge length X type. ・There is also a Jector Punch that has a scrap removal pin built into the punch to prevent scrap removal. [What is TiCN coating]・TiCN is a coating widely used in press molds. Improved punch life can be expected by increasing the wear resistance of the cutting edge. ・B...Readmore

    • FLANGE
    • SKH51
    • POWDER HSS
    • TiCN
    CAD :
    2D / 3D
    Days to Ship: 5 Day(s) or more
  • Jector Punches DLC Coating

    Jector Punches DLC Coating

    MISUMI

    We have added die steel lineup and cutting edge length X type!・The biggest feature is the low coefficient of friction compared to other coated punches. Since there is less friction between the punch cutting edge and the workpiece (workpiece material), it is effective in piercing aluminum materials, where chips during punching tend to be a problem.

    CAD :
    2D / 3D
    Days to Ship: 11 Day(s) or more
  • Key Flat Shank Shoulder Punches Normal, TiCN Coating

    Key Flat Shank Shoulder Punches Normal, TiCN Coating

    MISUMI

    A shoulder punch with a flat surface on the shank to prevent rotation. You can choose between a normal type with no coating and a TiCN coating with improved wear resistance.

    • FLANGE
    • SKH51
    • SKD11
    • POWDER HSS
    • TiCN
    CAD :
    2D / 3D
    Days to Ship: 5 Day(s) or more
  • Shoulder Punches, WPC treatment

    Shoulder Punches, WPC treatment

    MISUMI

    shoulder punch that has been treated with WPCⓇ. Excellent fatigue strength, seizure resistance, and wear resistance.

    CAD :
    2D / 3D
    Days to Ship: 4 Day(s) or more
  • Shoulder Punches Lapping

    Shoulder Punches Lapping

    MISUMI

    shoulder punch with a lap finish on the cutting edge. Improves sliding properties, seizure resistance, and adhesion resistance.

    • FLANGE
    • SKH51
    • POWDER HSS
    CAD :
    2D / 3D
    Days to Ship: 4 Day(s) or more
  • Jector Punches Configurable full length, Fixed B type, Normal, WPC treatment

    Jector Punches Configurable full length, Fixed B type, Normal, WPC treatment

    MISUMI

    ・This is a jetter punch that keeps the cutting edge length (B dimension) constant for any given overall length (L dimension). ・If you want to strengthen the scum removal force, please use the "spring reinforced type". - Since there is no side hole in the shank of the punch, you can use it as an air blow punch by removing the kicker pin.

    • FLANGE
    • SKH51
    • SKD11
    • WPC
    CAD :
    2D / 3D
    Days to Ship: 4 Day(s) or more
  • Shoulder Punches  RW Coating

    Shoulder Punches RW Coating

    MISUMI

    ・A highly durable product that suppresses cutting edge wear and reduces maintenance man-hours and total costs. ・Added die steel lineup and cutting edge length X type. ・There is also a Jector Punch that has a scrap removal pin built into the punch to prevent scrap removal. [What is RW coating]・It is a coating with higher hardness and higher heat resistance than TiCN. Furthermore, WPC treatment is applied to the base to strengthen the ad...Readmore

    CAD :
    2D / 3D
    Days to Ship: 7 Day(s) or more
  • Shoulder Punches Quill type, Normal, Lapping, TiCN Coating, HW Coating

    Shoulder Punches Quill type, Normal, Lapping, TiCN Coating, HW Coating

    MISUMI

    shoulder punch for punching small holes. For shaft diameter D1.6-2.5, there are two types of brim thickness to choose from: 3mm and 5mm. We also support various surface treatments such as lapping and TiCN.

    • FLANGE
    • SKH51
    • POWDER HSS
    • TiCN
    • HW
    CAD :
    2D / 3D
    Days to Ship: 5 Day(s) or more
  • Shoulder Punches Short type, Normal, TiCN Coating

    Shoulder Punches Short type, Normal, TiCN Coating

    MISUMI

    A shoulder punch with a shorter overall length than usual. By reducing the connecting radius between the cutting edge and the shaft, the cutting edge length and punch holding margin are secured with a short length.

    • FLANGE
    • SKH51
    • SKD11
    • POWDER HSS
    • TiCN
    CAD :
    2D / 3D
    Days to Ship: 5 Day(s) or more
  • Double Stepped Shoulder Punches Quill type

    Double Stepped Shoulder Punches Quill type

    MISUMI

    A punch with a guide section separate from the cutting edge. Please use this when the diameter of the cutting edge is small and it is difficult to secure the necessary cutting edge length for the guide.

    • FLANGE
    • SKH51
    • POWDER HSS
    CAD :
    2D / 3D
    Days to Ship: 5 Day(s)
  • Key Flat Shank Shoulder Punches WPC treatment, HW Coating

    Key Flat Shank Shoulder Punches WPC treatment, HW Coating

    MISUMI

    This punch is a shoulder punch with a flat surface on the shank to prevent rotation, and has been treated with WPC®, a type of precision shot peening, to improve fatigue strength and the adhesion of the TiCN coating.

    • FLANGE
    • SKH51
    • SKD11
    • POWDER HSS
    • HW
    • WPC
    CAD :
    2D / 3D
    Days to Ship: 5 Day(s) or more
  • Double Stepped Shoulder Punches, HW Coating

    Double Stepped Shoulder Punches, HW Coating

    MISUMI

    A two-stage shoulder punch with improved coating adhesion by using WPCⓇ treatment.

    • FLANGE
    • SKH51
    • SKD11
    • POWDER HSS
    • TiCN
    • HW
    CAD :
    2D / 3D
    Days to Ship: 5 Day(s) or more
  • Jector Punches Lapping

    Jector Punches Lapping

    MISUMI

    This is a jetter punch with a lap finish on the cutting edge. Improves sliding properties, seizure resistance, and adhesion resistance.

    • FLANGE
    • SKH51
    • SKD11
    • POWDER HSS
    CAD :
    2D / 3D
    Days to Ship: 4 Day(s) or more
  • Jector Punches Normal and Lapping with Large Diameter Pins

    Jector Punches Normal and Lapping with Large Diameter Pins

    MISUMI

    ・Since the diameter of the waste removal pin is larger than that of a normal jetter punch, a more stable waste removal effect can be expected. ・The pin strength and rigidity have also been increased by increasing the diameter of the brushing pin. Please also try this when pin breakage is a problem with regular jet punches.

    • FLANGE
    • SKD11
    CAD :
    2D / 3D
    Days to Ship: 4 Day(s) or more
  • Straight Punches for Heavy Load -TiCN Coating-

    Straight Punches for Heavy Load -TiCN Coating-

    MISUMI

    Straight punch for punching thick plates with TiCN coating to improve wear resistance.

    CAD :
    2D / 3D
    Days to Ship: 5 Day(s) or more
  • Key Flat Shank Jector Punches RW Coating

    Key Flat Shank Jector Punches RW Coating

    MISUMI

    This punch has a jetter punch with a flat surface on the shank to prevent rotation, and is coated with an Al-Cr coating that is more heat resistant and durable than TiCN, which is widely used in press molds. Effective when piercing difficult-to-process materials.

    CAD :
    2D / 3D
    Days to Ship: 7 Day(s) or more
  • Shoulder Punches, HW Coating

    Shoulder Punches, HW Coating

    MISUMI

    ・A highly durable product that suppresses cutting edge wear and reduces maintenance man-hours and total costs. ・Added die steel lineup and cutting edge length X type. ・There is also a Jector Punch that has a scrap removal pin built into the punch to prevent scrap removal. [What is HW coating]・It is a coating that improves the adhesion of the TiCN film by applying WPC treatment to the base of the TiCN coating. Since the coating film is le...Readmore

    CAD :
    2D / 3D
    Days to Ship: 5 Day(s) or more
  • Shoulder Punches Dicoat treatment

    Shoulder Punches Dicoat treatment

    MISUMI

    ・This punch has been treated with dicoat treatment (TD treatment) to improve the wear resistance of the punch cutting edge. ・There is also a Jector Punch that has a scrap removal pin built into the punch to prevent scrap removal.

    • FLANGE
    • SKD11
    • POWDER HSS
    • DICOAT
    CAD :
    2D / 3D
    Days to Ship: 5 Day(s) or more
  • Jector Punches Dicoat treatment

    Jector Punches Dicoat treatment

    MISUMI

    ・This is a punch with improved wear resistance of the punch edge by applying dicoat treatment (TD treatment) to the jetta punch. ・If you want to strengthen the scum removal force, please use the "spring reinforced type".

    • FLANGE
    • SKD11
    • POWDER HSS
    • DICOAT
    CAD :
    2D / 3D
    Days to Ship: 5 Day(s) or more
  • Key Flat Shank Jector Punches Normal, TiCN Coating

    Key Flat Shank Jector Punches Normal, TiCN Coating

    MISUMI

    A jetter punch with a flat surface on the shank to prevent rotation. You can choose between a normal type with no coating and a TiCN coating with improved wear resistance.

    • FLANGE
    • SKH51
    • SKD11
    • POWDER HSS
    • TiCN
    CAD :
    2D / 3D
    Days to Ship: 5 Day(s) or more
  • Double Stepped Shoulder Punches, Normal

    Double Stepped Shoulder Punches, Normal

    MISUMI

    punch with a guide section separate from the cutting edge. Please use this when the required cutting edge length B for the guide cannot be secured with the cutting edge diameter P.

    • FLANGE
    • SKH51
    • SKD11
    • POWDER HSS
    • TiCN
    • HW
    CAD :
    2D / 3D
    Days to Ship: 4 Day(s) or more
  • Double Stepped Shoulder Punches, TiCN Coating

    Double Stepped Shoulder Punches, TiCN Coating

    MISUMI

    A two-stage shoulder punch with TiCN coating, which is widely used in press dies.

    • FLANGE
    • SKH51
    • SKD11
    • POWDER HSS
    • TiCN
    • HW
    CAD :
    2D / 3D
    Days to Ship: 5 Day(s) or more
  • Shoulder Punches -DLC Coating-

    Shoulder Punches -DLC Coating-

    MISUMI

    We have added die steel lineup and cutting edge length X type!・The biggest feature is the low coefficient of friction compared to other coated punches. Because there is less friction between the punch cutting edge and the workpiece (workpiece material), it is effective in piercing aluminum materials, where chips during punching tend to be a problem.

    CAD :
    2D / 3D
    Days to Ship: 11 Day(s) or more
  • Jector Punches, HW Coating

    Jector Punches, HW Coating

    MISUMI

    ・A highly durable product that suppresses cutting edge wear and reduces maintenance man-hours and total costs. ・Added die steel lineup and cutting edge length X type. ・If you want to strengthen the scum removal force, please use the "spring reinforced type". [What is HW coating]・It is a coating that improves the adhesion of the TiCN film by applying WPC treatment to the base of the TiCN coating. Since the coating film is less likely to pee...Readmore

    CAD :
    2D / 3D
    Days to Ship: 5 Day(s) or more
  • Jector Punches -NW Coating(DLC Coating+WPC® Treatment)-

    Jector Punches -NW Coating(DLC Coating+WPC® Treatment)-

    MISUMI

    We have added die steel lineup and cutting edge length X type!・The biggest feature is the low coefficient of friction compared to other coated punches. Because there is less friction between the punch cutting edge and the workpiece (workpiece material), it is effective in piercing aluminum materials, where chips during punching tend to be a problem. ・In addition to the regular DLC coating, this punch has WPC treatment applied to the bas...Readmore

    CAD :
    2D / 3D
    Days to Ship: 11 Day(s) or more
  • Double-Stepped Shoulder Punches, RW Coating

    Double-Stepped Shoulder Punches, RW Coating

    MISUMI

    A two-stage shoulder punch that uses a combination of Al-Cr coating, which has higher heat resistance and durability than conventional TiCN, and WPCⓇ treatment.

    CAD :
    2D / 3D
    Days to Ship: 7 Day(s) or more
  • Double Stepped Shoulder Punches -DLC Coating-

    Double Stepped Shoulder Punches -DLC Coating-

    MISUMI

    A two-stage shoulder punch with DLC coating. Effective for aluminum piercing processing.

    CAD :
    2D / 3D
    Days to Ship: 11 Day(s) or more
  • Key Flat Shank Jector Punches WPC treatment, HW Coating

    Key Flat Shank Jector Punches WPC treatment, HW Coating

    MISUMI

    This punch has a jetter punch with a flat surface for preventing rotation on the shank, and has been treated with WPC®, a type of precision shot peening, to improve fatigue strength and the adhesion of the TiCN coating.

    • FLANGE
    • SKH51
    • SKD11
    • POWDER HSS
    • HW
    • WPC
    CAD :
    2D / 3D
    Days to Ship: 5 Day(s) or more
  • Key Flat Shank Tapped Punches Normal, TiCN Coating

    Key Flat Shank Tapped Punches Normal, TiCN Coating

    MISUMI

    tapped punch with a flat surface on the shank to prevent rotation. You can choose between a normal type with no coating and a TiCN coating with improved wear resistance.

    • BOLT
    • SKD11
    • POWDER HSS
    • TiCN
    CAD :
    2D / 3D
    Days to Ship: 5 Day(s) or more
  • Mini Punches

    Mini Punches

    MISUMI

    This punch is useful when drilling multiple holes in relatively thin material.

    • FLANGE
    • SKH51
    CAD :
    2D / 3D
    Days to Ship: 6 Day(s)
  • Shoulder Punches  Quill Type·DLC Coating

    Shoulder Punches Quill Type·DLC Coating

    MISUMI

    A shoulder punch for punching small holes with a DLC coating that is effective for punching aluminum. For shaft diameter D1.6-2.5, there are two types of brim thickness to choose from: 3mm and 5mm.

    • FLANGE
    • SKH51
    • POWDER HSS
    • DLC
    CAD :
    2D / 3D
    Days to Ship: 11 Day(s) or more
  • Shoulder Punches  Short Type·DLC Coating

    Shoulder Punches Short Type·DLC Coating

    MISUMI

    A shoulder punch with a shorter overall length than usual that is compatible with DLC coating, which is well-regarded in aluminum processing. By reducing the connecting radius between the cutting edge and the shaft, the cutting edge length and punch holding margin are secured with a short length.

    • FLANGE
    • SKH51
    • POWDER HSS
    • DLC
    CAD :
    2D / 3D
    Days to Ship: 11 Day(s) or more
  • Key Flat Shank Jector Punches·DLC Coating

    Key Flat Shank Jector Punches·DLC Coating

    MISUMI

    This punch has a DLC coating applied to the jetter punch, which has a flat surface on the shank to prevent rotation. Effective for punching aluminum.

    • FLANGE
    • SKH51
    • POWDER HSS
    • DLC
    CAD :
    2D / 3D
    Days to Ship: 11 Day(s) or more
  • Key Flat Shank Shoulder Punches·DLC Coating

    Key Flat Shank Shoulder Punches·DLC Coating

    MISUMI

    This is a shoulder punch with a DLC coating applied to the shank with a flat surface to prevent rotation. Effective for punching aluminum.

    • FLANGE
    • SKH51
    • POWDER HSS
    • DLC
    CAD :
    2D / 3D
    Days to Ship: 11 Day(s) or more
  • Key Flat Shank Tapped Punches  DLC Coating

    Key Flat Shank Tapped Punches DLC Coating

    MISUMI

    A tapped punch with a flat surface on the shank to prevent rotation, and a DLC-based coating. Effective for punching aluminum.

    • BOLT
    • SKH51
    • POWDER HSS
    • DLC
    CAD :
    2D / 3D
    Days to Ship: 11 Day(s) or more
  • Shoulder Punches -Short Type·HW Coating-

    Shoulder Punches -Short Type·HW Coating-

    MISUMI

    A shoulder punch with a shorter overall length than usual that is compatible with TiCN coating, which is widely used in press molds. By reducing the connecting radius between the cutting edge and the shaft, the cutting edge length and punch holding margin are secured with a short length.

    CAD :
    2D / 3D
    Days to Ship: 5 Day(s) or more
  • Double-Stepped Tapped Punches -TiCN Coating-

    Double-Stepped Tapped Punches -TiCN Coating-

    MISUMI

    ・As a measure against bolt breakage, we have expanded the specifications for large diameter tap types and added specifications for extra large diameter taps! ・A punch with a tap that is fixed and held with a bolt. It is easy to replace the punch and adjust the height after re-sharpening the cutting edge. Since there is no brim, it is also recommended for punching at narrow pitches. ・A punch with a guide section separate from the cuttin...Readmore

    CAD :
    2D / 3D
    Days to Ship: 5 Day(s) or more
  • Double-Stepped Tapped Punches -HW Coating-

    Double-Stepped Tapped Punches -HW Coating-

    MISUMI

    ・As a measure against bolt breakage, we have expanded the specifications for large diameter tap types and added specifications for extra large diameter taps! ・A punch with a tap that is fixed and held with a bolt. It is easy to replace the punch and adjust the height after re-sharpening the cutting edge. Since there is no brim, it is also recommended for punching at narrow pitches. ・A punch with a guide section separate from the cuttin...Readmore

    CAD :
    2D / 3D
    Days to Ship: 7 Day(s)
  • Key Flat Shank Tapped Punches -HW Coating-

    Key Flat Shank Tapped Punches -HW Coating-

    MISUMI

    This punch has a tapped punch with a flat surface on the shank to prevent rotation, and has been treated with WPC®, a type of precision shot peening, to improve fatigue strength and the adhesion of the TiCN coating.

    CAD :
    2D / 3D
    Days to Ship: 5 Day(s) or more
  • Round Punches -HW Coating-

    Round Punches -HW Coating-

    MISUMI

    This punch is designed to hold the punch with the brim and prevent it from coming off with a key plate, etc. The cutting edge is coated with HW coating, which has improved adhesion than regular TiCN.

    CAD :
    2D / 3D
    Days to Ship: 5 Day(s) or more
  • Jector Punches  RW Coating

    Jector Punches RW Coating

    MISUMI

    ・A highly durable product that suppresses cutting edge wear and reduces maintenance man-hours and total costs. ・Added die steel lineup and cutting edge length X type. ・If you want to strengthen the scum removal force, please use the "spring reinforced type". [What is RW coating]・It is a coating that is harder and more heat resistant than TiCN. Furthermore, WPC treatment is applied to the base to strengthen the adhesion of the coating fi...Readmore

    CAD :
    2D / 3D
    Days to Ship: 7 Day(s) or more
  • Shoulder Punches  Quill Type·RW Coating

    Shoulder Punches Quill Type·RW Coating

    MISUMI

    shoulder punch for punching small holes with an Al-Cr coating, which is more heat resistant and highly durable than the TiCN coating commonly used in molds. For shaft diameter D1.6-2.5, there are two types of brim thickness to choose from: 3mm and 5mm.

    CAD :
    2D / 3D
    Days to Ship: 7 Day(s) or more

Loading...

Related Categories to Punches

Not a MISUMI customer yet? Register & enjoy 50% off your order!* (*T&C apply.)

We also deliver to:Philippines, Australia, New Zealand, Middle East region!