NISSIN SANGYO Presetters

• 

  Tool Setter i

  NISSIN SANGYO

  Blade position with cutting tool diameter of φ0.05 mm can be detected. Machine-mounted tool length measurement instrument for high-speed spindle type machining center.
  
  [Features]
  · Developed for machining centers with ceramic spindles.
  · Can also be used for non-conductive workpieces because of the internal contact system.
  · Uses scratch-resistant ceramic for the cutting edge detection part. High-luminosity LED (blue) notifies the user of position detection.
  · A magnet is attached to the bottom to support both vertical and horizontal use.

  Standard Price:	SGD 719.21
  Days to Ship:	10 Day(s) or more

• 

  Non-Magnetic Point Finder Stylus

  NISSIN SANGYO

  The non-magnetic carbide stylus has been crafted using our unique production method. Technology that owes its existence to the total comprehension of work sites.
  
  [Features]
  · It is not subject to measurement error due to the influence of magnetic force.
  · No need to demagnetize or replace the stylus.
  · No rusting.
  · Low-temperature welding, preventing thermal stress.
  · Economical with the same price as a general stylus.

  Standard Price:	SGD 178.16-
  Days to Ship:	4 Day(s) or more

• 

  Centering Gauge

  NISSIN SANGYO

  Centering gauge, a centering classic. Additionally, three-dimensional measurement such as inner diameter, outer diameter, steps and circles can be performed at high accuracy.
  When the probe is mounted onto the spindle and then brought into contact with the workpiece, the LED emits light and measurement can be done easily.

  Standard Price:	SGD 320.86-
  Days to Ship:	6 Day(s) or more

• 

  Tool Setter - Internal Contact Type (Supports Non-Conductive Workpieces)

  NISSIN SANGYO

  An ultra-precise tool setter with a detection accuracy of 1 μm.
  
  [Features]
  · An ultra-precise tool setter with a detection accuracy of 1 μm.
  · Uses scratch-resistant ceramic for the cutting edge detection part.
  · Ideal for detecting the position of the cutting edges of small diameter drills and end mills.
  · Adopts an internal contact system that can be used for non-conductive workpieces and machining centers with ceramic spindles.
  · Magnet on base plate.
  · Can be used with both vertical and horizontal types.

  • Volume Discount

  Standard Price:	SGD 659.30
  Days to Ship:	9 Day(s) or more

• 

  Non-Magnetic Waterproof Type Point Finder

  NISSIN SANGYO

  Peace of mind even in harsh working environments thanks to IP67 waterproofing (IEC standard). Measurement error will not occur even if cutting fluid is applied. ±1 μm repeat accuracy is possible up to 80 mm.
  
  [Features]
  · The waterproof structure prevents the cutting fluid from entering the sensor, thus avoiding measurement errors.
  · The LED will light with a small contact pressure of 0.1 gf between the stylus and the workpiece.
  · Enables accurate measurement of thin workpieces. The stylus swings in the X, Y and Z directions.
  · Usable for iron and non-ferrous metal workpieces.
  · With the development of a new mechanism (patent pending), measurement accuracy has improved dramatically

  Standard Price:	SGD 1,348.35-
  Days to Ship:	6 Day(s) or more

• 

  Non-Magnetic Waterproof Type Point Finder i

  NISSIN SANGYO

  Peace of mind even in harsh working environments thanks to IP67 waterproofing (IEC standard). Measurement error will not occur even if cutting fluid is applied. ±1 μm repeat accuracy is possible up to 80 mm. Even measures non-metal workpieces.
  
  [Features]
  · In addition to features of the above-mentioned "Non-Magnetic/Waterproof Type Point Finder," measurement on non-metallic workpieces is also enabled.
  · Capable of all types of measurement such as reference position setting, inner/outer diameter, centering, angle, groove width and height with high precision

  Standard Price:	SGD 1,172.08-
  Days to Ship:	6 Day(s) or more

• 

  Non-Magnetic Buzzer Specification Point Finder

  NISSIN SANGYO

  [Features]
  · The LED will light with a small contact pressure of 0.1 gf between the stylus and the workpiece.
  · Accurate measurement, even on thin workpieces.
  · Includes buzzer with simultaneous electronic sound and LED to provide notification of position detection.
  · Safe design that allows the stylus to swing in X/Y/Z directions.
  · The measurement accuracy of metals and nonferrous metals has been dramatically improved

  Standard Price:	SGD 798.63-
  Days to Ship:	6 Day(s) or more

• 

  Non-Magnetic Point Finder

  NISSIN SANGYO

  Conventionally, the repeatability of the stylus was limited to lengths of 40 mm. ±1 μm repeat accuracy is possible up to 80 mm.

  Standard Price:	SGD 716.15-
  Days to Ship:	6 Day(s) or more

• 

  Non-Magnetic Small Point Finder

  NISSIN SANGYO

  Used exclusively for small, high speed machining centers.
  
  [Features]
  · It can also be used for compact high-speed machining centers for molding mobile phones and digital appliances.
  · It can be used with a ceramic spindle and has a nonmagnetic stylus, so there are no measurement errors due to magnetic force

  Standard Price:	SGD 1,348.35-
  Days to Ship:	6 Day(s) or more

• 

  Non-Magnetic Point Finder i

  NISSIN SANGYO

  The internal switch is turned ON when the stylus makes contact. Non-conductive workpieces can also be measured.
  
  [Features]
  · Capable of all types of measurement such as reference position setting, inner/outer diameter, centering, angle, groove width and height.
  · Internal contact type that can also measure non-metallic workpieces such as wood, plastic, glass or ceramics.
  · With 7 shank sizes and the development of a new mechanism (patent pending), measurement accuracy has improved dramatically

  Standard Price:	SGD 1,098.83-
  Days to Ship:	6 Day(s) or more

• 

  Non-Magnetic Small Point Finder i

  NISSIN SANGYO

  Used exclusively for small, high speed machining centers.
  
  [Features]
  · It can also be used for compact high-speed machining centers for molding mobile phones and digital appliances.
  · It can be used with a ceramic spindle and has a nonmagnetic stylus, so there are no measurement errors due to magnetic force

  Standard Price:	SGD 1,796.77-
  Days to Ship:	6 Day(s) or more

• 

  For Non-Magnetic Stylus Center Ring Gauge Swing Type

  NISSIN SANGYO

  ● There is no measurement error due to magnetism.
  ● Demagnetized, so there is no need to replace styluses, which improves work efficiency.
  ● Permeability (μ) ≤ 1.01 → Non-Magnetic
  ● Sphericity: Within 0.6 μm
  ● Hardness: HRA 92
  ● Specific Electrical Resistance: 3.2 μΩ (1/3 that of Iron)
  ● Wire Expansion Coefficient: 1.2 x 10-6 (1/10 that of Iron)
  ● No Rusting
  ● Unique low-temperature welding technology does not crack easily, and there is no residual inside stress, so deterioration does not occur due to aging.
  ● Economical with the same price as a general stylus.

  Standard Price:	SGD 286.68-
  Days to Ship:	9 Day(s) or more

Loading...