OMRON Other Relays

• • On Sale Till 31/03/2025

  

  Program Relay ZEN

  OMRON

  Simple programmable relay.
  [Features]
  ·ZEN, which is ideal for simple control, has been upgraded and renewed.
  ·Full of functions in a compact body (width 70 mm × length 90 mm).
  · A single unit combining relay, timer, counter, and time switch functionality.
  · No need to individually wire the timer and relay etc., greatly reducing the amount of wiring steps.
  · Multiple-day operation and pulse operation have been added. Time control settings are easy to configure, without complicated programming.
  · RS-485 communications types also available as part of the product series. Can remotely monitor the ZEN control status.
  · Features a counter function that can count up to 8 digits. The maximum count for DC power supply models is 150 Hz.
  · The twin-timer function allows you to set ON and OFF times separately, greatly simplifying repetitive operations. Helps reduce the program capacity.

  Standard Price:	SGD 153.46-
  	Special Price
  Days to Ship:	Same day

• 

  Single-Phase Overvoltage/Undervoltage Relay K8AK-VW

  OMRON

  Ideal for voltage monitoring for industrial facilities and equipment. Monitor for overvoltage and undervoltage simultaneously
  
  ■ Features
  · Monitor for overvoltage and undervoltage simultaneously. Separate settings and outputs supported for overvoltages and undervoltages.
  · Manual resetting and automatic resetting supported by 1 relay.
  · Pre-alarm monitoring mode.
  · Two 1c output contacts, 5 A at 250 V AC (resistive load).
  · Process control signal (0 to 10 V) and current splitter input supported.
  · Output status can be monitored using LED indicator.
  · Input frequency of 40 to 500 Hz supported.
  · Inputs are isolated from the power supply.

  Standard Price:	SGD 390.93
  Days to Ship:	4 Day(s) or more

• 

  DC Power Relay (200A Type) G9EC-1

  OMRON

  A DC power relay that is designed with low noise, long lifespan, and environmental resistance to cut off DC loads with high voltage and high current.
  [Features]
  ・ The compact size of height 86.7 mm × width 44 mm × length 98 mm supports 400 V DC, 200 A opening and closing. (Maximum 400 V DC, 1,000 A can be cut off)
  ・ The gas filling and sealing structure of the opening/closing part and drive part enables high-capacity load cutoff due to its small size. In addition, arc space-free space saving and safety are realized. At the same time, it achieves high contact reliability of contacts that are not affected by the surrounding atmosphere
  ・ Achieves arc space-free space saving and safety
  ・ No restrictions on mounting direction due to miniaturization of parts and proper matching design
  ・ Assortment of terminal covers required for general industrial machinery
  ・ UL/CSA standard UL508 acquisition
  [Applications]
  ・ Widely available for factory automation and non-factory automation devices

  Standard Price:	SGD 382.36
  Days to Ship:	4 Day(s) or more

• • On Sale Till 31/03/2025

  

  Solid State / Relay G3NE

  OMRON

  [Features]
  · For built-in use.
  · Small 5 to 20A power type with good cost savings.
  · Wide range load voltage of AC75 to 264V.
  · Use with both 100V, 200V.
  · Dedicated aluminum circuit board, use of power element enables small size.
  · Superior surge absorption due to built-in varistor.
  · Connection uses tab terminals of input #110, output #250.
  · UL, CSA, EN (TUV certification) standards acquired (-US type).

  Standard Price:	SGD 26.44-
  	Special Price
  Days to Ship:	Same day or more

• • On Sale Till 31/03/2025

  

  High-Capacity, High-Voltage Power Relay G7J

  OMRON

  A multi-pin power relay that achieves high capacity and high voltage and is one step closer to the contactor area.
  [Features]
  ·Its high capacity allows it to be used for not just resistors and inductive loads but also for motor controls.
  ·No contact chatter occurs even in the event of an momentary voltage drop up to 50% of the rated voltage.
  ·Achieves withstanding voltage of 4 KV or more between contacts of different polarities as well as between coil and contacts.
  ·All insulation materials are flame-retardant materials that have passed UL94 V-0 standard.
  ·Standard product certified by UL and CSA standard.
  ·Contact gap 3 mm or more (both sides).
  [Applications]
  ·For switch control of compressors and heaters for package air conditioners.
  ·For switch control of electric tools and various motors.
  ·For ramp control motor drive and power supply switch control of office equipment such as copiers and fax machines.
  · For power controls on packaging equipment and food processing machines.
  ·For inverter power supply control.

  Standard Price:	SGD 26.03-
  	Special Price
  Days to Ship:	Same day or more

• • On Sale Till 31/03/2025

  

  DC Power Relay (25A type) G9EB-1

  OMRON

  A DC power relay that enables high-voltage and high-current DC load cutoff.
  [Features]
  ・ Achieves Omron's original "metal housing-gas sealed structure made of resin material / non-ceramic structure."It is possible to reduce the parts and special processing required for conventional products, and realize miniaturization, weight reduction, and cost reduction of the relay body
  ・ Smallest size in class: 25 × 60 × 58 mm, the lightweight in its class: Achieves about 135 g. Achieves a volume ratio of about 1/2 and a mass ratio of about 1/3 when comparing DC power relays of the same class (400 V DC, 25 A)
  ・ The unique design of the contact switching component and permanent magnet for blowing out the arc eliminates the need for polarity in the main circuit (contact terminal). Contributes to improved ease of handling during wiring and installation, and foolproofing against incorrect wiring

  Standard Price:	SGD 155.04
  	Special Price
  Days to Ship:	Same day

• 

  Stepping Relay Unit G9 B

  OMRON

  A stepping relay unit that allows the step status to be grasped at a glance with the LED display.
  [Features]
  ·Contact relay output allows 2 A (250 V AC, 30 V DC) switching.
  ·Stepping control suitable for pump control and process control are made into a unit.
  ·There are 2 types of steps; 6 circuits and 12 circuits.
  · Restores to step initial state due to reset input.
  ·With the retention function that stores the stepping status in the internal memory for 10 days even in the event of a power failure. (The output contact is off state during a power failure.)
  ·Equipped with a failure detection function that detects on state failures of the built-in relay drive element due to such as external noise. An alarm LED is displayed and an alarm is output at the contact. (Relay contact failure and chip welding failure cannot be detected)
  · Terminal block designed with finger protection to prevent electric shocks.
  ·With LED display that allows the step status to be grasped at a glance.
  [Applications]
  ·Used where sequential circuit switching is required.

  Standard Price:	SGD 210.91-
  Days to Ship:	4 Day(s) or more

• • On Sale Till 31/03/2025

  

  DC Power Relay (60 A and 100 A Type) G9EA-1

  OMRON

  DC power relay capable of interrupting high voltage high current DC loads.
  [Features]
  ・ Compact size with height 86.7 mm × width 44 mm × length 98 mm, compatible with 400 V DC, 200 A opening and closing (Maximum 400 V DC, 1,000 A can be cut off)
  ・ The gas filling and sealing structure of the opening/closing part and drive part enables high-capacity load cutoff due to its small size. In addition, arc space-free space saving and safety are realized. At the same time, it achieves high contact reliability of contacts that are not affected by the surrounding atmosphere
  ・ No restrictions on mounting direction due to miniaturization of parts and proper matching design
  ・ Assortment of terminal covers required for general industrial machinery
  ・ UL/CSA standard UL508 acquisition

  Standard Price:	SGD 269.83
  	Special Price
  Days to Ship:	Same day or more

• 

  Power Relay G7X

  OMRON

  High-grade power relay with cut-off capacity 110 V DC, 30 A and L/R = 40 ms.
  [Features]
  ·Main contact (2a) that cuts off 110 V DC, 30 A (short-time ratings).
  ·Built-in auxiliary contacts suitable for answerback (1a, 1b).
  ·Each terminal is a PCB terminal and mounted to the PCB.
  ·The main contact terminal can be used for both screw wiring and circuit board wiring.
  · Compact and flat due to high density design.
  ·The insulation materials are flame-retardant and comply with UL94 V-0 standard.
  [Applications]
  ·For use in communication equipment, office equipment, test and measuring instrument, disaster/crime prevention equipment, security devices, etc.
  ·For use in pole switch units, power supply equipment, industrial equipment, factory automation equipment, etc.
  ·Mounted to the PCBs and used in a wide range of applications.

  Standard Price:	SGD 111.08-
  Days to Ship:	4 Day(s) or more

• • On Sale Till 31/03/2025

  

  Power relay G7Z

  OMRON

  Other multi-pin power relay in contactor current range that can be opened and closed by energizing 440 V AC / 40 A as a relay.
  [Features]
  ・ 1 pole 40 A can be energized
  ・ Maximum energization capacity when 4 poles are connected in parallel is 160 A
  ・ Obtained EN60947-4-1 mirror contact mechanism certification by combining the relay body and auxiliary contact block
  ・ Designed with few openings to prevent dust and foreign matter from entering
  ・ Ideal for energizing industrial inverters, servo drivers, etc., and opening and closing power supplies for motors, etc.
  ・ Compliant with European PV standard (VDE0126)
  [Applications]
  ・ Mainly available for control panels, industrial machines, etc.

  Standard Price:	SGD 72.44-
  	Special Price
  Days to Ship:	Same day or more

• 

  Single-Phase Current Relay K8AK-AS

  OMRON

  Ideal for current monitoring for industrial facilities and equipment. Monitor for overcurrents or undercurrents.
  
  ■ Features
  · Monitor for overcurrents or undercurrents.
  · Use commercially available CTs (CT current on secondary side: 0 to 1 A or 0 to 5 A).
  · Manual resetting and automatic resetting supported by 1 relay.
  · Startup lock and operating time can be set separately.
  · One 1c output contact, 5 A at 250 V AC (resistive load).
  · Output relay can be switched between normally open and normally closed.
  · Output status can be monitored using LED indicator.
  · Inputs are isolated from the power supply.
  

  Standard Price:	SGD 194.72
  Days to Ship:	4 Day(s) or more

• 

  Temperature Alarm K8DT-TH

  OMRON

  Value Design for Panel compatible product that enhances the value of the control panel.
  Equipped with an ideal self-holding function to prevent the heater from overheating, contributing to the safe operation of the device.
  [Features]
  ·Temperature setting with ultra-simple rotary DIP switch
  ·Digital setting is possible from 0 to 999 degrees Celsius in 1 degree increments using a single unit (Type K8DT-TH1□□) (Digital setting is available for type K8DT-TH2□□ from 0 to 1,800 degrees Celsius in 10 degrees increments)
  ·Thermocouple and platinum resistance temperature detector (RTD) can be connected
  ·Push-in Plus terminal that is effective in reducing wiring labor-hours. The use of cage clamps enables wiring with bare stranded wires
  ·Double insertion hole for crossover wiring (Compatible with all terminals)
  ·Transistor output type with excellent contact reliability is added

  Standard Price:	SGD 130.56-
  Days to Ship:	4 Day(s) or more

Loading...