Swing Handles（Page2）

• 

  Pop Handle Mini A-410-B

  TAKIGEN

  [Features]
  · Waterproof type (using O-ring and packing).
  · Protrusion from the panel mounting surface is 4 mm, and there is 40 mm till the stopper in this thin type.
  · Left and right hand use (you can exchange left and right by turning the cam over).
  · Standard lock, dedicated small cylinder (C-288-H) is used.
  · Since the key will leave the lock only at the time of locking, there is no forgetting to lock

  CAD ：

  2D / 3D

  Standard Price:	SGD 62.66
  Days to Ship:	8 Day(s) or more

• 

  Plastic Multi-Lock Flush Handle AP-469-W

  TAKIGEN

  [Features]
  · 2 locks are built-in and it supports various security systems.
  · Master lock specification: can be released with either lever side cylinder or case side cylinder.
  · Set lever side cylinder to different key, and by setting the case side cylinder to the same key, you can manage and operate like a master key.
  · Double lock specification: The handle lever can not be released unless you unlock both the lever side cylinder and the case side cylinder.
  · Both sides are aligned, and for the first time there is a specification to enable cancel (operation).
  · Note: various customized combinations can be made according to request, such as making the same key (stop number) on one side, different key on both sides, etc.

  CAD ：

  2D / 3D

  Standard Price:	SGD 39.74
  Days to Ship:	Same day

• 

  Waterproof Flat Handle AC-100-E with Load Controller

  TAKIGEN

  [Features]
  · Rod bar is attached straight.
  · Determine the center without bend processing.
  · A new reversible key with a dust proof shutter with excellent operability, TAK60 is standard equipment. (AC-100-E-TAK60).
  · Easy to handle swing handle type.
  · 3 point tightening corresponding with stopper.
  · Improved rust prevention satellite chrome plating (25 μm).
  · Waterproof type (using O ring and sheet packing).
  · Left and right hand dual use (exchange left and right by turning over the control center)

  CAD ：

  2D

  Standard Price:	SGD 103.21
  Days to Ship:	4 Day(s) or more

• • On Sale Till 31/03/2025

  

  Flush Handle With Push Button A-180

  TAKIGEN

  [Features]
  · Left/right dual use type (If the stopper is turned inside out, right and left can be interchanged)

  CAD ：

  2D

  Standard Price:	SGD 22.99-
  	Special Price
  Days to Ship:	Same day or more

• 

  Plane Handle with Pushbutton A-181

  TAKIGEN

  [Features]
  · Left and right dual use (exchange left and right by turning over the stopper)

  CAD ：

  2D

  Standard Price:	SGD 23.94-
  Days to Ship:	8 Day(s) or more

• • On Sale Till 31/03/2025

  

  Plane Handle with Pushbutton A-260-A

  TAKIGEN

  [Features]
  · Galling prevention type stopper is standard equipment.
  · Panel drilling dimensions are the same as A-240.
  · Left and right hand use (you can exchange left and right by turning the stopper over)

  CAD ：

  2D / 3D

  Standard Price:	SGD 36.22-
  	Special Price
  Days to Ship:	Same day or more

• 

  Round Pop Handle A-303

  TAKIGEN

  [Features]
  · The lock comes standard with TAK60, a new kind reversible key with an easy to use dust-proof shutter (A-303-TAK60).
  · Waterproof type (using O ring / packing).
  · Since it is one-touch lock system, there is no forgetting to lock (with key), for left and right dual use

  CAD ：

  2D / 3D

  Standard Price:	SGD 57.37-
  Days to Ship:	4 Day(s) or more

• • On Sale Till 31/03/2025

  

  Waterproof Flush Handle With Force-Out Mechanism A-481-F

  TAKIGEN

  [Features]
  · This lock comes standard equipped with a new reversible key TAK60 and a dust-proof shutter, with excellent operability.
  · The mechanism used for forcibly pushing the handle out is activated by pressing the button strongly.
  · Manufactured by Nitto K.K. H-83/84/86 and panel drilling are compatible.
  · Waterproof type (using O-ring/packing).
  · Left/right combination type (exchange left and right by turning the cam)

  CAD ：

  2D / 3D

  Standard Price:	SGD 50.32-
  	Special Price
  Days to Ship:	Same day or more

• 

  Waterproof Flat Handle with Force Push-Out Function A-494-12

  TAKIGEN

  [Features]
  · This lock comes standard equipped with a new reversible key TAK60 and a dust-proof shutter, with excellent operability.
  · When key is turned, forcibly pushing the handle up by 6 mm, it pops.
  · A-494-2 and panel drilling is compatible.
  · Waterproof type (using O ring and sheet packing).
  · F satellite chrome plating for improved rust prevention.
  · Left/Right combination type

  CAD ：

  2D

  Standard Price:	SGD 85.58
  Days to Ship:	8 Day(s) or more

• 

  Sliding Plane Handle A-242-A

  TAKIGEN

  [Features]
  · Slide mechanism is used in the rotation drive part of the stopper, preventing accidents (galling phenomenon) at high load of the stopper.
  · A-160· A-240, etc. flat handle and panel drilling dimensions are compatible.
  · Left and right hand use (you can exchange left and right by turning the stopper over)

  CAD ：

  2D

  Standard Price:	SGD 22.99-
  Days to Ship:	4 Day(s) or more

• 

  Waterproof Flush Handle to Prevent Salt Damage, A-464-J

  TAKIGEN

  [Features]
  · Corresponds to waterproof standard IP × 6.
  · Developed for heavy salt damage, making it ideal for doors requiring salt tolerance.
  · Rubber cap that protects the lock part from rainwater and dust is standard equipment.
  · Change from conventional sheet packing to convex type packing of soft rubber molding.
  · Improved adhesion.
  · Handle shaft part has a double O ring specification, which improves waterproofing and operability.
  · A new reversible key with a dust proof shutter with excellent operability, TAK60 is standard equipment.
  · Made from aluminum and lightweight

  CAD ：

  2D / 3D

  Standard Price:	SGD 47.67
  Days to Ship:	4 Day(s) or more

• • On Sale Till 31/03/2025

  

  Folding Flush Handle A-150

  TAKIGEN

  [Features]
  · Left/right dual use type (If the stopper is turned inside out, right and left can be interchanged)

  CAD ：

  2D / 3D

  Standard Price:	SGD 20.35-
  	Special Price
  Days to Ship:	Same day or more

• • On Sale Till 31/03/2025

  

  Tightening Flat Handle, A-464-F

  TAKIGEN

  [Features]
  · This lock comes standard equipped with a new reversible key TAK60 and a dust-proof shutter, with excellent operability.
  · Panel drilling dimensions are compatible with A-160 / A-240, etc. series (A-464-F-1).
  · With tightening mechanism.
  · In conjunction with the raising and lowering of the handle, the stopper moves back and forth (3 mm).
  · For right side

  CAD ：

  2D / 3D

  Standard Price:	SGD 60.02-
  	Special Price
  Days to Ship:	Same day or more

• 

  Tightening Flat Handle A-474

  TAKIGEN

  Total length (mm): 125· Total width (mm): 38· Total height (mm): 26.7 · Applicable plate thickness (mm): 4
  · Material: Zinc alloy / Finish: Satellite chrome plating / Stopper: Included

  CAD ：

  2D / 3D

  Standard Price:	SGD 60.90-
  Days to Ship:	4 Day(s) or more

• 

  Thin Flush Swing Handle A-464

  TAKIGEN

  [Features]
  · Waterproof type (O ring / sheet packing used).
  · Panel drilling dimensions are compatible with A-160· A-240 series, etc.
  · Left/right combination type (exchange left and right by turning over the cam).

  CAD ：

  2D / 3D

  Standard Price:	SGD 25.64-
  Days to Ship:	Same day

• 

  Thin Flush Swing Handle A-464-C

  TAKIGEN

  [Features]
  · This lock comes standard equipped with a new reversible key TAK60 and a dust-proof shutter, with excellent operability.
  · Panel drilling dimensions are compatible with A-160· A-240 series, etc.
  · Height from the mounting surface to the stopper is suppressed to 12.5 mm, which places no burden on the internal design of the board.
  · Left/right combination type (exchange left and right by turning over the cam)

  CAD ：

  2D / 3D

  Standard Price:	SGD 33.57-
  Days to Ship:	4 Day(s) or more

• • On Sale Till 31/03/2025

  

  Thin Flat Swing Handle, A-464-L

  TAKIGEN

  [Features]
  · Waterproof type (using O ring and sheet packing).
  · A new reversible key with a dust proof shutter with excellent operability, TAK60 is standard equipment (A-464-L-TAK60).
  · Panel drilling dimensions are compatible with A-160· A-240 series, etc.
  · Left/right combination type (exchange left and right by turning over the cam)

  CAD ：

  2D

  Standard Price:	SGD 47.67-
  	Special Price
  Days to Ship:	Same day or more

• 

  Thin, Flat Swing Handle, A-499

  TAKIGEN

  [Features]
  · Push slide pin tumbler TAK40 is used, so the lock portion fits compactly, and space can be effectively used both inside and outside the panel surface.
  · Temporary fixation can be done with one touch and workability is improved.
  · Left/right combination type (exchange left and right by turning over the cam)

  CAD ：

  2D / 3D

  Standard Price:	SGD 76.76
  Days to Ship:	8 Day(s) or more

• • On Sale Till 31/03/2025

  

  Thin Waterproof Flat Handle, A-494

  TAKIGEN

  [Features]
  · This lock comes standard equipped with a new reversible key TAK60 and a dust-proof shutter, with excellent operability.
  · When key is turned, forcibly pushing the handle up by 6 mm, it pops.
  · A-494-2 and panel drilling is compatible.
  · Waterproof type (using O ring / sheet packing) satellite chrome plating with improved rust prevention.
  · For both left hand and right hand use

  CAD ：

  2D / 3D

  Standard Price:	SGD 30.93-
  	Special Price
  Days to Ship:	Same day or more

• 

  Flat Handle with Emergency Escape Device A-265

  TAKIGEN

  [Features]
  · Open from the inside using the emergency escape device, even when locked from the front side.
  · Keyless type can be locked easily with a coin.
  · Compatible with panel drilling dimensions of conventional handle

  CAD ：

  2D

  Standard Price:	SGD 17.70-
  Days to Ship:	4 Day(s) or more

• 

  Flat Handle A-230

  TAKIGEN

  [Features]
  · Standard equipped clasp is an anti-scratch type.
  · A new reversible key with a dust proof shutter with excellent operability, TAK60 is standard equipment. (A-230-TAK60).
  · Left and right hand dual use (exchange the left and right by turning the stopper over).
  · Panel drilling dimensions are the same as A-240

  CAD ：

  2D

  Standard Price:	SGD 39.74-
  Days to Ship:	4 Day(s) or more

• • On Sale Till 31/03/2025

  

  Plane Handle A-250-A

  TAKIGEN

  [Features]
  · Standard equipped clasp is an anti-scratch type.
  · Panel drilling dimensions are the same as A-240.
  · Left and right hand dual use (exchange left and right by turning over the stopper)

  CAD ：

  2D / 3D

  Standard Price:	SGD 31.81-
  	Special Price
  Days to Ship:	Same day or more

• 

  Flat Handle A-910

  TAKIGEN

  [Features]
  · Left and right dual use (exchange left and right by turning over the stopper)

  CAD ：

  2D / 3D

  Standard Price:	SGD 28.28-
  Days to Ship:	4 Day(s) or more

• 

  Waterproof Push Handle, A-490

  TAKIGEN

  [Features]
  · The lock comes standard with TAK60, a new kind reversible key with an easy to use dust-proof shutter (A-490-TAK60).
  · Waterproof type (using O ring and sheet packing).
  · Left/right combination type (exchange left and right by turning over the cam)

  CAD ：

  2D / 3D

  Standard Price:	SGD 59.13-
  Days to Ship:	4 Day(s) or more

• • On Sale Till 31/03/2025

  

  Waterproof Flat Handle, A-465-C

  TAKIGEN

  [Features]
  · The lock comes standard with TAK60, a new style reversible key with an easy to use dust-proof shutter (A-1465-C and A-465-F).
  · Flat handle A-160 / A-240 series can be installed even with panel drilling dimensions.
  · For both left hand and right hand use

  CAD ：

  2D

  Standard Price:	SGD 34.45
  	Special Price
  Days to Ship:	Same day

• 

  Waterproof Flat Handle, A-465-F

  TAKIGEN

  [Features]
  · The lock comes standard with TAK60, a new style reversible key with an easy to use dust-proof shutter (A-1465-C and A-465-F).
  · Flat handle A-160 / A-240 series can be installed even with panel drilling dimensions.
  · For both left hand and right hand use

  CAD ：

  2D

  Standard Price:	SGD 41.50-
  Days to Ship:	4 Day(s) or more

• 

  Waterproof Flat Handle A-484-A

  TAKIGEN

  [Features]
  · The lock comes standard with TAK60, a new kind reversible key with an easy to use dust-proof shutter (A-484-A-TAK60).
  · Waterproof type (using O ring and sheet packing).
  · Left/right combination type (exchange left and right by turning over the cam)

  CAD ：

  2D

  Standard Price:	SGD 60.90
  Days to Ship:	8 Day(s) or more

• 

  Waterproof Flat Handle A-484-B-1

  TAKIGEN

  [Features]
  · Waterproof type (O ring / sheet packing used).
  · A new reversible key with a dust proof shutter with excellent operability, TAK60 is standard equipment. (A-484-B-TAK60).
  · Improved rust prevention satellite chrome plating (25 μm).
  · Left /right combination type (exchange left and right by turning over the cam)

  CAD ：

  2D

  Standard Price:	SGD 71.48
  Days to Ship:	4 Day(s) or more

• 

  Waterproof Flat Handle, A-484-B-2

  TAKIGEN

  [Features]
  · Waterproof type (using O ring and sheet packing).
  · A new reversible key with a dust proof shutter with excellent operability, TAK60 is standard equipment (A-484-B-TAK60).
  · Rustproof satellite chrome plating (25 μm).
  · Left/right combination type (exchange left and right by turning over the cam)

  CAD ：

  2D

  Standard Price:	SGD 66.19
  Days to Ship:	4 Day(s) or more

• 

  Waterproof Flat Handle, A-484-B-3

  TAKIGEN

  [Features]
  · Waterproof type (using O ring and sheet packing).
  · A new reversible key with a dust proof shutter with excellent operability, TAK60 is standard equipment (A-484-B-TAK60).
  · Rustproof satellite chrome plating (25 μm).
  · Left/right combination type (exchange left and right by turning over the cam)

  CAD ：

  2D / 3D

  Standard Price:	SGD 57.37
  Days to Ship:	4 Day(s) or more

• 

  Waterproof Flat Handle, A-488

  TAKIGEN

  [Features]
  · The lock comes standard with TAK60, a new kind reversible key with an easy to use dust-proof shutter (A-488-TAK60).
  · Waterproof type (using O ring and sheet packing), with few protrusions from the panel surface.
  · When unlocking, use push button for handle operation.
  · Lift handle part is equipped with a push button, and the effective length of the grip is increased to improve operability.
  · Left/right combination type (exchange left and right by turning over the cam)

  CAD ：

  2D / 3D

  Standard Price:	SGD 58.25-
  Days to Ship:	4 Day(s) or more

• 

  Waterproof Flat Handle, A-495

  TAKIGEN

  [Features ]
  · Strongest type in the flat handle series.
  · Rustproof satellite chrome plating (25 μm).
  · Waterproof type (using O ring and sheet packing).
  · Left/right combination type (exchange left and right by turning over the cam).
  · A new reversible key with a dust proof shutter with excellent operability, TAK60 is standard equipment (A-495-TAK60 / A-496-TAK60· A-497-TAK60)

  CAD ：

  2D / 3D

  Standard Price:	SGD 67.95-
  Days to Ship:	4 Day(s) or more

• 

  Waterproof Flat Handle, A-496

  TAKIGEN

  [Features ]
  · Strongest type in the flat handle series.
  · Rustproof satellite chrome plating (25 μm).
  · Waterproof type (using O ring and sheet packing).
  · Left/right combination type (exchange left and right by turning over the cam).
  · A new reversible key with a dust proof shutter with excellent operability, TAK60 is standard equipment (A-495-TAK60 / A-496-TAK60· A-497-TAK60)

  CAD ：

  2D / 3D

  Standard Price:	SGD 67.95
  Days to Ship:	8 Day(s) or more

Loading...