FRL Units（Page2）

• 

  Air Combination, Air Filter + Regulator, AC10B-A to AC40B-A

  SMC

  SMC modular-type F.R.L. combination unit.
  [Features]
  · Uses a transparent bowl guard.
  · A transparent bowl guard with improved environmental resistance that provides all-round protection.
  · The manufacturer has removed the window from the bowl guard and instead covered the entire internal bowl with a polycarbonate transparent bowl guard.
  · Now, even if the environment changes and the bowl is exposed to corrosive chemicals or oil, the foreign matter will not stick directly to the pressurized bowl. This can help reduce the risk of the bowl breaking.
  · Superior visibility: 360°
  · The use of the transparent bowl guard allows you to check the status of the drain inside the filter bowl and to check the amount of residual oil in the lubricator from any angle.
  · Weight reduction: reduced by up to 90 g
  · Without corrosion. The use of a resin body ensures there is no rusting.

  CAD ：

  2D / 3D

  Days to Ship:	31 Day(s) or more

• 

  3-Port Valve for Releasing Residual Pressure With Keyhole (Double Action Type) VHS2510/3510/4510/5510

  SMC

  With this OSHA compliant Pressure Relief 3-Port Valve (Double Action) With Locking Holes, the supply and exhaust status of air flow can be checked at a glance.
  [Features]
  · The safety-measure manually operated valve can be used to prevent accidents caused by residual pressure in pneumatic lines.
  · A specification in which when residual pressure is being released, the valve handle can be locked in position to prevent accidental operation.
  · The double action type is structured so that the handle has to be pushed down before turning, helping prevent accidental operation.

  CAD ：

  2D / 3D

  Days to Ship:	32 Day(s) or more

• 

  Air Combination, Air Filter + Regulator, ACG20B, ACG30B, ACG40B

  SMC

  FRL unit with improved visibility of the pressure gauge at various mounting locations.
  [Features]
  · Single-action installation and removal of the pressure gauge cover.·
  · The mounting angle of the pressure gauge can be selected according to the piping direction.
  Pressure gauge anti-revolving mechanism.
  Panel-cut for pressure gauge not necessary.
  · Fluid: air.

  CAD ：

  2D / 3D

  Days to Ship:	Quote

• 

  Air Combination Air Filter + Mist Separator + Regulator ACG20/30/40C

  SMC

  FRL unit with single-action installation and removal of the pressure gauge cover.
  [Features]
  · Improved visibility of the pressure gauge at various mounting locations.
  · The mounting angle of the pressure gauge can be selected according to the piping direction.
  Pressure gauge anti-revolving mechanism.
  Panel-cut for pressure gauge not necessary.

  CAD ：

  2D / 3D

  Days to Ship:	Quote

• 

  Attachment, C Type Bracket

  CKD

  Note: CAD data of this series is being revised. Please wait till the corrections are done.

  CAD ：

  2D / 3D

  Standard Price:	SGD 5.59-
  Days to Ship:	4 Day(s) or more

• 

  Attachment L type bracket

  CKD

  Note: CAD data of this series is being revised. Please wait till the corrections are done.
  
  [Features]
  · Knob can be detached by loosening mounting nut.
  · Mounting nut fixes device in place once set into an L type bracket.
  · Lastly, please press knob in from the top.

  CAD ：

  2D / 3D

  Standard Price:	SGD 5.59-
  Days to Ship:	4 Day(s) or more

• 

  Attachment T-Type Bracket

  CKD

  Note: CAD data of this series is being revised. Please wait till the corrections are done.

  CAD ：

  2D / 3D

  Standard Price:	SGD 9.16-
  Days to Ship:	4 Day(s) or more

• 

  FMR Combination (Modular Type Standard) C*030/C2530 Series

  CKD

  Note: CAD data of this series is being revised. Please wait till the corrections are done.
  
  [Features]
  · Boost your system with modularization.
  · Dual element construction provides long life.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Modular type WL combination standard white series

  CKD

  Boost your system with modularization. Dual element construction provides long life. Note: CAD data of this series is being revised. Please wait till the corrections are done.
  
  [Features]
  · Its elasticity and flexibility allows it to be used for piping in even tight spaces.
  · TAC duct aluminum can shrink to 1/5 of its length, and TAC duct aluminum 2 can shrink to 1/10 of its length. This allows it to be stored compactly so it does not take up much storage space.
  · Can withstand bending multiple times and is resistant to heat (up to 80°C)

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  L Type Pipe Adapter, A101, A401, A801-W Series

  CKD

  Note: CAD data of this series is being revised. Please wait till the corrections are done.

  CAD ：

  2D / 3D

  Standard Price:	SGD 19.95-
  Days to Ship:	4 Day(s) or more

• 

  Piping Adapter A100/A400/A800-W Series

  CKD

  Note: CAD data of this series is being revised. Please wait till the corrections are done.

  CAD ：

  2D / 3D

  Standard Price:	SGD 20.16-
  Days to Ship:	4 Day(s) or more

• 

  Conditioning small FR series, filter regulator FRN series

  KOGANEI

  Compact, lightweight. Attached piping for easy connection. Note: CAD data of this series is being revised. Please wait till the corrections are done.

  Standard Price:	SGD 47.54-
  Days to Ship:	4 Day(s) or more

• 

  Conditioning equipment FRZ series pressure gauge

  KOGANEI

  Note: CAD data of this series is being revised. Please wait till the corrections are done.

  CAD ：

  2D

  Standard Price:	SGD 21.68-
  Days to Ship:	4 Day(s) or more

• 

  Conditioning Unit Parts, GZ Series Residual Pressure Relief 3 Port Valve

  AIRTAC

  [Features]
  · Can be used in combination with the G series F.R.L (with bracket).
  · Can be used as a manual three port valve.
  · Improved visibility for manual notices (EXH/SUP).
  · OSHA compliant.

  CAD ：

  2D / 3D

  Standard Price:	SGD 29.57-
  Days to Ship:	4 Day(s) or more

• 

  Filtered Regulator N Series

  CHELIC

  Brand-name products provided by MISUMI-VONA are offered based on customer needs and have been carefully selected from the offerings of Asian manufacturers showing remarkable growth. Please select the right item for your individual usage environment. Founded in 1988, Taiwan CHELIC Corporation's pneumatic equipment parts have received high praise on the world market. Their cylinder quality gets particularly high reviews, and is used in various fields.

  CAD ：

  2D / 3D

  Standard Price:	SGD 43.32-
  Days to Ship:	7 Day(s) or more

• 

  Air Combination Air Filter + Regulator + Lubricator ACG20/30/40

  SMC

  Air Combination Air Filter + Regulator + Lubricator with no need to cut a panel for the pressure gauge.
  [Features]
  · Improved visibility of the pressure gauge at various mounting locations.
  · One-touch installation and removal of the pressure gauge cover.
  · The mounting angle of the pressure gauge can be selected according to the piping direction.
  · Pressure gauge anti-rotation mechanism.

  CAD ：

  2D / 3D

  Days to Ship:	Quote

• 

  Filter Regulator W1000/2000/3000/4000/8000-W-FP1 Series

  CKD

  It supports food manufacturing.
  Food-grade lubricant (NSF H1) is used for the flow path and sliding parts.
  Modular type filter regulators.
  [Features]
  ・ Series of 5-μm element for dust removal, and 0.3-μm element for tar removal
  ・ Connection Port Diameter: 1/8 to 1
  [Applications]
  ・ Effective and economical removal of impurities in compressed air
  ・ For space saving of piping

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Air Combination, Filter Regulator + Lubricator, ACG20A, ACG30A, ACG40A

  SMC

  FRL unit with improved visibility of the pressure gauge at various mounting locations.
  [Features]
  · Single-action installation and removal of the pressure gauge cover.·
  · The mounting angle of the pressure gauge can be selected according to the piping direction.
  Pressure gauge anti-revolving mechanism.
  Panel-cut for pressure gauge not necessary.

  CAD ：

  2D / 3D

  Days to Ship:	Quote

• 

  E210/310/410 Series Modular Adapter

  SMC

  FRL unit that allows easy connection to current products.
  [Features]
  · Flexible mounting.
  · Can be connected to current products such as 2-port valves as well as FRL units.
  · Can be freely rotated, thus allowing a wide selection of mounting directions.
  · Can be connected to current products of a different size.
  · Reduced space and piping maintenance costs.
  · Can be connected/disconnected without rotation.
  · Fittings, tube, etc. not required for connection.
  · Location of pressure gauge can be fixed depending on the installation location.

  CAD ：

  2D / 3D

  Days to Ship:	32 Day(s) or more

• 

  AC Series Air Combination Cross Spacer

  SMC

  Cross spacer that allows piping in all 4 directions.
  [Features]
  · IN/OUT ports are not machined for threads.
  · Attachment for AC Series Air Combination.
  · Y14-M5-A applicable model: AC10□-A.
  · Y24-□01-A, 02-A applicable model: AC20□-A.
  · Y34-□01-A, 02-A applicable models: AC25□-A, AC30□-A.
  · Y44-□02-A, 03-A applicable model: AC40□-A.
  · Y54-□03-A, 04-A applicable model: AC40□-06-A.

  CAD ：

  2D / 3D

  Days to Ship:	32 Day(s) or more

• 

  Filter Regulator, 25A-AW20 to 60-B, 25A-AW20K to 60K-B

  SMC

  [Features]
  · In order to reduce product defects in the rechargeable battery manufacturing process, materials containing copper (Cu) and zinc (Zn) are not used.
  · No electrolytic nickel plating or zinc plating with copper base is used.
  * Electroless nickel plating is used.
  · Low dew point compatible grease used, can be used at -70°C.

  Days to Ship:	32 Day(s) or more

• • On Sale Till 30/04/2025

  

  Air Preparation Combination Unit, MSB6 Series

  FESTO

  Standard Price:	SGD 297.50-
  	Special Price
  Days to Ship:	21 Day(s) or more

• 

  3-Port Valve for Releasing Residual Pressure With Keyhole (Single Action) 25A-VHS20/30/40/50

  SMC

  [Rechargeable battery compatible series]
  Copper (Cu) and zinc (Zn) materials are not used in the rechargeable battery manufacturing process to reduce product defects.
  Some aluminum alloys and die-cast aluminum materials contain small amounts of copper (Cu) and zinc (Zn) as additive elements.
  Electrolytic nickel plating and zinc plating with copper base are not used. (Electroless nickel plating is used.)
  It uses low dew point compatible grease, -70°C compatible, improved performance in low dew point environment.

  Days to Ship:	32 Day(s) or more

• 

  Distributor D101/D401/D801/D300 Series

  CKD

  Note: CAD data of this series is being revised. Please wait till the corrections are done.

  CAD ：

  2D / 3D

  Standard Price:	SGD 19.95-
  Days to Ship:	4 Day(s) or more

• 

  FRL Combination (Modular Type Standard) C*000/C*500 Series

  CKD

  Boost your system with modularization. Dual element construction provides long life. Note: CAD data of this series is being revised. Please wait till the corrections are done.
  
  [Features]
  · Compact modularization: Design for each F.R.L device focused on making it more compact. Assembled dimensions are accurately calculated with a simple calculation.
  · Lightweight: The material combination allows for both strength and low weight.
  · Long life element: The elements are constructed from a unique fiber structure that is rough on the surface and becomes finer the further inward it goes (PAT.PEND). Almost no clogs. No rust concerns.
  · Space-saving embedded pressure meter: Past models had a pressure meter that stuck out of the front surface, wasting space or being at risk of striking the employees. This embedded design is both clean and an improvement to safety.
  · Prevents oil drips when reverse pressure is applied such as when residual exhaust valves release pressure.
  · Taking safety into further consideration, this device is equipped with a corrosive resistant plastic bowl.
  · Gauge plug is sealed even here a pipe plug is not installed.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  FR Combination (Modular Type Standard) C*020 / C2520 Series

  CKD

  Boost your system with modularization. Dual element construction provides long life. Note: CAD data of this series is being revised. Please wait till the corrections are done.
  
  [Features]
  · Design for each F.R.I device focused on making it more compact. Assembled dimensions are accurately calculated with a simple calculation.
  · Maintained strength from previous models and decreased weight by 50% (compared to C4000) by using a combination of materials (body is aluminum die cast, cover is resin).
  · The elements are constructed from a unique fiber structure that is rough on the surface and becomes finer the further inward it goes (PAT.PEND). Greatly reduced clogs and greatly improved product life. No rust concerns.
  · Past models had a pressure meter that stuck out of the front surface, wasting space or being at risk of striking the employees. This embedded design is both clean and an improvement to safety.
  · Prevents oil drips when reverse pressure is applied such as when residual exhaust valves release pressure.
  · Taking safety into further consideration, this device is equipped with a corrosive resistant plastic bowl.
  · Gauge plug is sealed even here a pipe plug is not installed.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Modular type WM combination standard white series

  CKD

  Boost your system with modularization. Dual element construction provides long life. Note: CAD data of this series is being revised. Please wait till the corrections are done.
  
  [Features]
  · Its elasticity and flexibility allows it to be used for piping in even tight spaces.
  · TAC duct aluminum can shrink to 1/5 of its length, and TAC duct aluminum 2 can shrink to 1/10 of its length. This allows it to be stored compactly so it does not take up much storage space.
  · Can withstand bending multiple times and is resistant to heat (up to 80°C)

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Modular type reverse filter and regulator standard white series

  CKD

  Boost your system with modularization. Dual element construction provides long life. Note: CAD data of this series is being revised. Please wait till the corrections are done.
  
  [Features]
  · Series featuring built in reverse flow feature, 5μm dust removal, and 0.3μm tar removal

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Separate type, FR unit, 7000 series

  CKD

  [Features]·This is a product that integrates an air filter and a regulator.

  CAD ：

  2D

  Standard Price:	SGD 67.78-
  Days to Ship:	4 Day(s) or more

• 

  Conditioning equipment FRZ series pressure switch module

  KOGANEI

  Note: CAD data of this series is being revised. Please wait till the corrections are done.

  Standard Price:	SGD 64.84-
  Days to Ship:	4 Day(s) or more

• 

  Conditioning equipment FRZ series module/adapter

  KOGANEI

  Note: CAD data of this series is being revised. Please wait till the corrections are done.

  Standard Price:	SGD 9.09-
  Days to Ship:	2 Day(s) or more

• 

  Conditioning equipment FRZ series bracket

  KOGANEI

  Note: CAD data of this series is being revised. Please wait till the corrections are done.

  Standard Price:	SGD 6.24-
  Days to Ship:	4 Day(s) or more

• 

  Conditioning equipment FRZ series integrated pressure gauge

  KOGANEI

  Note: CAD data of this series is being revised. Please wait till the corrections are done.
  
  [Features]
  · 30 integrated pressure meters for use with the FRZ series

  Standard Price:	SGD 22.08
  Days to Ship:	4 Day(s) or more

• 

  Air Unit FRL Unit Modular Connection Unit BN-25T6

  NIHON SEIKI

  A modular space-saving series feature built in bracket and pressure meter.
  
  [Features]
  · Each unit is easily set with its specialized attachment.
  · Metal bottle comes standard.
  · Fluid level is displayed through color changing glass.
  · Can be connected to pressure switch.

  CAD ：

  2D

  Standard Price:	SGD 159.67-
  Days to Ship:	4 Day(s) or more

• 

  Air Unit PL Unit Modular Connection Unit BN-25T5

  NIHON SEIKI

  [Features]
  · Each unit is easily set with its specialized attachment.
  · Metal bottle comes standard.
  · Fluid level is displayed through color changing glass.
  · Can be connected to pressure switch.

  CAD ：

  2D

  Standard Price:	SGD 149.91
  Days to Ship:	4 Day(s) or more

• 

  Air Unit Regulator with Filter BN-3RT5F

  NIHON SEIKI

  A modular space-saving series featuring a metal bottle.
  
  [Features]
  · Standard metal bottle.
  · Fluid level is displayed through color changing glass.

  CAD ：

  2D

  Standard Price:	SGD 96.45
  Days to Ship:	4 Day(s) or more

• 

  [NEW]Filter Regulator, outdoor series, WW4000, WW8000-W Series

  CKD

  Can be used for long periods of outdoor usage, even extreme environments, due to its outer metal construction and stainless steel screw.

  Days to Ship:	19 Day(s) or more

• 

  Other Goods We Handle

  CKD

  Coming soon for product specification, product photos, catalog products, etc.

  Standard Price:	SGD 593.65
  Days to Ship:	15 Day(s) or more

• 

  F.R.L. unit Set of 3

  CHELIC

  [Features]·The fluid used is air. ·There are 3 types available: mini type, middle type, and large type.

  CAD ：

  2D / 3D

  Standard Price:	SGD 70.35-
  Days to Ship:	4 Day(s) or more

• 

  F.R.L. unit N series Set of 2

  CHELIC

  MISUM-VONA products are carefully selected products from rapidly growing Asian manufacturers based on the needs of our customers. Choose the product that best suits your current needs. Founded in 1988, Cheric Taiwan pneumatic equipment parts have received high praise on the world market. Their cylinder quality gets particularly high reviews, and is used in various fields.

  CAD ：

  2D / 3D

  Standard Price:	SGD 59.44-
  Days to Ship:	4 Day(s) or more

• 

  F.R.L. unit Set of 2

  CHELIC

  This set brings a filter regulator and a lubricator into one integrated product. Filter can be set to manual or auto drain. Compact jig cylinder manufactured by a pneumatic equipment / special parts manufacturing company of Taiwan established in 1988. Sales have expanded world-wide and the company has gained a high reputation globally.

  CAD ：

  3D

  Standard Price:	SGD 63.89-
  Days to Ship:	4 Day(s) or more

• 

  L Shaped Steel Bracket BRT-C Type for F.R.L. Unit

  CHELIC

  MISUM-VONA products are carefully selected products from rapidly growing Asian manufacturers based on the needs of our customers. Choose the product that best suits your current needs. Founded in 1988, Cheric Taiwan pneumatic equipment parts have received high praise on the world market. Their cylinder quality gets particularly high reviews, and is used in various fields.

  Standard Price:	SGD 5.20-
  Days to Ship:	12 Day(s)

• 

  L Shaped Steel Bracket BRT-B Type for F.R.L. Unit

  CHELIC

  MISUM-VONA products are carefully selected products from rapidly growing Asian manufacturers based on the needs of our customers. Choose the product that best suits your current needs. Founded in 1988, Cheric Taiwan pneumatic equipment parts have received high praise on the world market. Their cylinder quality gets particularly high reviews, and is used in various fields.

  Standard Price:	SGD 4.44-
  Days to Ship:	12 Day(s) or more

• 

  F.R.L. unit modular holder BRT-15D/30D

  CHELIC

  MISUM-VONA products are carefully selected products from rapidly growing Asian manufacturers based on the needs of our customers. Choose the product that best suits your current needs. Founded in 1988, Cheric Taiwan pneumatic equipment parts have received high praise on the world market. Their cylinder quality gets particularly high reviews, and is used in various fields.

  Standard Price:	SGD 7.56-
  Days to Ship:	12 Day(s)

• 

  F.R.L. unit modular holder BRT-15E/30E

  CHELIC

  MISUM-VONA products are carefully selected products from rapidly growing Asian manufacturers based on the needs of our customers. Choose the product that best suits your current needs. Founded in 1988, Cheric Taiwan pneumatic equipment parts have received high praise on the world market. Their cylinder quality gets particularly high reviews, and is used in various fields.

  Standard Price:	SGD 7.56-
  Days to Ship:	12 Day(s)

Loading...